Use a stripper designed for aircraft use on aluminum. One such product is SV-35/AC or RemovAll 210, manufactured by Napier Environmental Technologies. It is easy to use – you just paint or spray it on and hose it off. It's classified as non-hazardous. One supplier is Aircraft Spruce. Napier also privately brands this product, and it is marketed by ICI Paints as Hydrostrip 502, and also under the Crown label. It's available in 1 and 5 gallon sizes.

Walbernize is a type of wax that has been used on Airstream Plasticoats since the first trailer was coated. Should be applied two times a year, more if you want. It was first used by Airstream when they were transporting trailers. They applied it to the front of the trailer so that when bugs and dirt got attached to the trailer in transit, they could easily clean the coach when it arrived at the dealer lot.

Unfortunately no. The 2 part material is a special application process that is only being commercially done by the factory or: Airstream plans to build some regional service centers in the future that may be able to do this process too.

The clear coat finish gives your vehicle a "showroom shine" and protects the base coat from damage. ECO advises you to regularly clean and condition your vehicle's clear coat finish to ensure ultimate protection and luster.

The best way to protect your vehicle's clear coat is to visit one of ECO's many locations on a regular basis. Regular application of our Double Clear Coat Sealant creates a barrier that helps protect your vehicle's finish from harmful UV rays and airborne contaminants, as well as acids, tree saps, bugs, and bird droppings...All of which cause damage to your vehicle's factory clear coat. Our protective sealant lasts up to 30 days on your vehicle's finish.

Use a hair dryer for newer stickers or a warm iron over a wet towel on a hot, sunny day for old dried out stickers to soften the adhesive, and they peel right off. A little Goo-Gone, Goof-Off or lacquer thinner will remove any remaining adhesive.

The clear coat finish we use is Bulls Eye Shellac by Zinsser. It is an All-natural, non-toxic, very durable finish, works great to protect your prized quilt or wall hanging. UV resistant and non-yellowing, it is absolutely safe to use on children's toys. Currently we only offer the Clear finish, which has a faint, golden cast that is much lighter then other finishes. Please Note: Currently this is an added option not yet added to each item. Please Click here to add Clear Coat. Good Question.

Yes and no! You cannot clear coat over large graphics, but you can clear coat over small decals with thin lines, such as the P/T Cruiser decals and the motorcycle tank decals. Contact us for more details. Top

The clear topcoat protects both the surface of the wood and the tinted stain that has penetrated into the surface layers. The topcoat also has special UV inhibitors to stop the pigments in Pro-Tek-Tor from fading.

You shouldn't have to unless it gets scratched. But if you would like to re-clear coat the work anyway, we recommend using several light coats of a clear lacquer or polyurethane.

This varnish finish is presented in two jars, big and small, with varnish and hardener respectively. You have to mix two parts of varnish and one part of hardener. Caution! Once you have mixed varnish with hardener you CAN NOT put back the mix into any of the original jars! Surfaces that are going to be varnished must be clean and free of any dust or grease, this could cause bad effects in the finish. We recommend washing the model with water and soap before applying clear coat.

We recommend some practice before applying clear coat to any model. You should apply two or three wet coats with 10 minutes between them. You should airbrush with low pressure in slow movements, starting and finishing of throwing clear out of the model. It's important to keep the model in some place free of dust between coats and for the final drying time.

No. I use high quality decals which don't require a clear coat for protection and shine. A bonus of this is that when you get your frame and possibly not like your decal choice, you can change them.

The best way to determine a finish is through its damage. If a clear coat is in good condition it can be difficult for you to determine. Lacquer is the most common type of finish used commercially because it dries

Many homeowners like the look of their newly stacked log home and want to keep it looking just like the day it was erected. If your desire is for a "clear stain," your best choice is a stain color that most closely matches the color of your wood. It will stabilize color and far outlast any clear finish. The reality is that in manufacturing the log home, you have removed all of the natural defenses that trees have. Since they are no longer living, the sap and resins no longer nourish the fibers.

There are lots of companies offering Bed covers for the Lightning. This is another very personal subject. Most people that chose their top loved it and would not change a thing given a second chance. The popular hard covers are the SnugTop Snuglid, A.R.E. Lo-Pro, A.R.E. LSII, and Gaylord's low profile lid X-2000. http://www.f150online.com/forums/showthread.php?s=&threadid=21633 Powder Coated Billets http://www.zing.com/picture/p48e9b2038bc9169b58037ef90d1d9682/ffcb7e23.jpg.orig.

Clear-coating may provide additional protection for vinyl graphics, but caution should be used because solvents in some varnishes can attack the vinyl and/or adhesive, causing failure.

Clear spray lacquer is available at most hardware stores. Wood stains vary greatly. Natural oak is sealed and lacquered only. Also available is cherry, stained oak, antique oak, etc. RETURN TO TOP

Everyone who wants the clearest vision possible from his/her eyeglasses, including children, especially if you spend time:

Yes! You can clear coat on top of any decals! You can also use our graphics as paint mask when you are applying paint to the vehicle. We would caution you to think about the consequences of clear coating before you do it though. Once you clear coat on top of the decal, it is permanently attached to the surface and yellows with age. Removing clear coated graphics will involve sanding off the clear coat and then removing the graphics, then a re-paint.

Yes! In general, more coating is better than less. Parts subjected to harsh environments, such as direct UV light (sunlight) or aggressive aquatic or chemical exposure should be coated with a powder suitable for these environments. We will help you determine the right solution!

You can use Infralsi which provides excellent results with acrylic enamels, single stage paints as well with all medium solid paints.

We have to prove that No More Nails can stick wood to brick and would be strong enough to hold the man’s weight in order to clear the commercial for broadcast. If it's very big, we recommend that you fill it with UniBond No More Big Gaps first and then use UniBond No More Cracks Ready Mixed Filler when the foam is fully cured.

No, this is not recommended and is at your own risk. 3M film is supplied with an OEM-approved clear coat which is not formulated to be over-printed, painted or clear coated.

Yes. A clear coat finish can still scratch. NO-WET will not scratch your paint. A clear coat finish can still oxidize. By using NO-WET on a regular basis, you will be adding valuable protection to your car.

A clear coat is the top coat of a paint that contains no pigmentation or color. In a typical automotive paint surface, there is a primer coat which is what is sprayed on the metal or plastic body surface, a base coat, which contains the color and a clear coat. A clear coats purpose is to provide depth and gloss to the finish and to protect the base coat from the elements, including the harmful UV (Ultra-violet) rays of the sun.

BodyGlo Clear Coat Protectant was developed exclusively for Cool Wave Car Wash. It is the ultimate protective treatment for clear coat finishes. BodyGlo locks on a mirror-like, weather-tight layer of protection to guard sensitive clear coat finishes from the elements. It contains enhanced polymers to help protect your car's finish from the harmful effects of the sun's U.V. (Ultra Violet) rays.

Answer: When applying a coating, use alkyd or oil-based only. We do not recommend painting or applying another coating system for at least 6 months after treating.