Choose "My Computer"---"Control Panel"---"System"---"Device Manager"--- "CDROM"---"XXXxxxx"---"Settings"

It is not definitely necessary to update the firmware unless your computer does encounter any problem.

This is an optical drive that will write both DVDs (Digital Versatile Disk, Data or Video) and CDs. The LightScribe DVD+/-RW / CDRW combination drive can read, write and, using the appropriate media, rewrite a variety DVD and CD media, including CD-R, CD-RW, DVD+R, DVD-R, DVD+R DL, DVD-R DL, DVD+RW and DVD-RW. DVD+R, DVD-R and CD-R media are compatible with this drive but are a single write media. The DVD+RW, DVD-RW and CD-RW media can be written to multiple times.

Please download the flash program "XXXXXXXX" and the lastest firmware, close all running programs, then excute "XXXXXXXX" and specify the firmware file, follow the instructions showen on screen and update will complete after shutdown your system and reboot. It is very likely to be resulted from lower DAE capability of the CD-ROM, we suggest to record in lower speed, or extract CD track to hard drive before recording.

The newer linux machines in the Graduate Computer Lab have cd-rw drives. See our cd burning help page for more information.

You need to check whether A/P has supported this function or not. Basically, SpeedBurn drives do support this function with Nero.

Please check technical support in SpeedBurn IT's websit in www.liteonit.com.tw. Then, double click the CD-RW Download. After that, you can find the update file and procedure. Following the procedure, your Direct CD Version 2.5D should recognize SpeedBurn Cd-RW Drive successfully.

Currently, no "first" or "second generation" drives have been shipped with the new firmware version factory installed. Therefore, it is highly unlikely that your drive will already be equiped with this new version. However, the firmware installation utilitity will check and display you current firmware version, and will notify you when your firmware is already up-to-date.

Most writing software has an option for showing CD recorder information, which will include the firmware version. Check the firmware version using your writing software, which will have an option for CD recorder information, including the firmware version. Or you can also check it using the RFlash/Firmware Flash Utility program for uploading the firmware.

Login the router, click "Status" at the top corner, then check "Runtime Code Version". The runtime code version is the firmware version.

You can replace the CD-ROM/DVD-ROM drive with CD-RW drive in only a few minutes. However, if you want to upgrade the CD-ROM/DVD-ROM to a CD-RW drive, you will need to purchase and install the CD-RW drive yourself. In later releases, the Eureka MD will include a CD-RW drive as one of your purchasing options. It is not recommended that you replace the drive yourself, as it may be difficult to find a replacement drive with the same type of faceplate.

The Ricoh.com web site only provides the firmware for Ricoh retail models for Asia and Oceania. OEM products are supported by the OEM company as they do for their own products. Please contact the OEM company for further assistance.

The standard Adeptias desks require a specially designed computer case to fit within the specified area. Unique cooling systems have been designed to accommodate the locations of the PCs. However, to support customers who wish to use a brand-name computer, Adeptias has designed the Option Editions which can use certain brand-name, low profile desktop PC and thin clients.

As the Adeptias desks are primarily used in training centres and schools, the majority of applications do not require an optical drive. However, to accommodate those that do, a full range of CD / DVD drives are available which can be included (built into the front of the desk) as an option.

SimpliCD Software by Oak Technology can use the Plextor CD-RW drive as a source to record CD+G discs to the hard drive as an image file, and then record the image back to a blank disc in the Plextor CD-RW drive. There are also other third party commercial software packages available that support CD+G authoring/recording with single drive systems.

Press MENU ? MENU ? 'Setup' ? ENTR ? 'System' ? ENTR ? MENU ? 'Software Version' ? ENTR. The current version of the firmware is shown. Unit ID is also listed.

With the IIGS turned on, press CONTROL-Apple-ESCAPE And go to the Transwarp CDA The ROM version will be displayed on the screen.

Frequently Asked Questions provide information of limited or specific application. Responsibility for judging the applicability of the information for a specific use rests with the end user.

A CD-R (CD Recordable) or CD-RW (CD ReWritable) isn't required for utilizing the DART Karaoke Studio, but you will be missing out on SOME exciting features. If you have a CD-R/RW installed on your system, you'll have the capability of creating your own audio CDs that feature YOU as the lead vocalist for your favorite hits! This process has been greatly enhanced by the addition of the included CD-Recorder 4 Basic version (A $50 dollar value FREE) to guide you in this process.

You don't actually HAVE to have one of these to use the software. However, you'll get very little use out of the program if you can't burn CDs (that is what it's made for, after all). There are users who run DartPro 32 simply for the restoration filters (DeClick and DeHiss) and for the ability to convert MP3 files to WAV files or MID files to WAV files.

The drive is either not supported or not installed correctly. If the Player is running on the Windows XP operating system, take the following steps: Check the Hardware Driver Quality page at the Microsoft Web site to ensure that the drive is designed for use with Windows XP. If it isn't listed on this site, it may not work correctly. To verify that your CD drive is recognized, open My Computer. Then in the Devices with Removable Storage area, right-click the drive, and then click Properties.

This is how you can check your Firmware version number. Press Menu and go to the setup menu (blue wrench on the left). Go in, and then select screen #1. Hold down the center OK button on the 4-way switch and at the same time press the Info button (i+) at the top. This will display a little dialog with the primary version of the firmware. While that screen is visible again press the AEL button and the Info button together.

Only MULTIREAD CD-ROM and DVD-ROM drives can read CD-RW media. Standard CD-ROM and DVD-ROM drives cannot read the low-reflectance media used in CD-RW discs.

You can play the disc on a conventional CD player (if supported). You will also need to record the music as a Wave file in order to use it in your car.

For CD-R disc: Verbatim, 700 MB, 1x-32x speed. (Please note that CD-R disc will record at maximum 8x speed only.)

This function detects whether the CD drive in your computer is fully compatible with SonicStage. To activate this function: This is not possible. You have to backup your music with the backup tool before recovering your computer. When using the SonicStage Backup Tool, SonicStage must not be running. Also make sure that no other program is running. It is not possible to select tracks for backup. All your tracks will be saved.

Under Windows 95/98/ME/XP/NT/2000 you must make sure that the following settings are enabled/disabled for all CD drives on the user's system (CD Readers and CD Writers): Make sure that your IDE/ATAPI drivers for your motherboard are updated. Some motherboards have an issue sending data to a CDR/DVD if these drivers are not updated. If you have a writing problem, this is one of the first things you should check. Device Manager - IDE ATA/ATAPI Controllers.