Some older televisions only have an antenna terminal and do not have video inputs necessary to connect DVD players. Use an RF Modulator that can be purchased at a major home electronics retailer or at our online store at www.apexdigitalinc.com

Your JVC DVD player has video/S-video and audio outputs but does not provide an RF coaxial output. You will need to purchase a RF modulator/converter in order to connect your DVD via the RF input on your television. You can purchase an RF modulator from your local Radio Shack, Circuit City, or Best Buy. In order to fit all the information on one side of the DVD, there are different layers of information on the disc.

Yes. You can hook up your DVD player to virtually any TV using a component, composite or S-video input.

DVD is a format that will provide significant picture quality advantages when connected to your television set via the S-Video connectors.

There are a couple different ways to do it. The connection can be made using our portable DVD player cable that came with your unit, if the DVD player has the appropriate jacks. Typically, they will be labeled with a picture of headphones for audio, and the letters AV for video.

I have connected a satellite receiver directly to the digital connection on the television and cannot receive my satellite channels.

You should connect the DVD players audio/video outputs to the audio/video inputs on your TV. To see the video signal, coming in from the DVD player, you need to switch off of your TV tuner and select the video input jacks. It is usually a TV/Video or Input button on your TV remote. If you connect a DVD player through a VCR the DVD movies copy guard feature is going to be activated and the color is going to blink from light to dark.

When determining the best connection method for setting up the home entertainment equipment, it's important to consider the specific type of audio/vid...

No, it is not, as the signal coming from the DVD player is not high-definition. It is 576 horizontal lines. High-definition is at least 720 horizontal lines.

To use TVGuardian with multiple devices without having to disconnect one to use the other, you will need to purchase an Audio/Video Switch Box. The allow you to switch between multiple sources (DVD Player, VCR, etc.) by pushing a button. An Audio/Video Switch Box can be found at Radio Shack and other electronics stores. TVGuardian works with virtually all TV shows, DVDs (see DVD info below) and videos, including videos you have recorded of qualified TV shows or movies (not home movies).

Ans: The M6 501 speaker package is available without the M6 501R II digital decoder. If you have a 6-channel pre-output A/V amplifier or decoder equipped DVD player, you can connect the speakers directly.

You can connect AGNPRO monitors equipped with video inputs: S-Video, Composite Video, and/or component video to various devices such as a TV tuner, DVD player, or other video input source. Some model are equipped a Y - adapter for Composite Video and S-Video input, e.g. S-15V, M-15V, S-17, S-18, S-19, X-174, X-150, X-215, F-315, F-317. Yes. Models equipped with video-in feature (S-video, RCA jack (CVBS) or Component video adapters) will support both NTSC and PAL and other major video standards.

The connection can be made, but the picture quality will be diminished greatly because of the DVD player's copy guard protection circuitry.

Yes. The versatile Pioneer DVD-V7400 DVD-Video player outputs include industry standard composite video, s-video, and component video. Connect the DVD-V7400 to a video projector, to a video monitor, or to your PC video capture card. Many of today’s PC also have dual-head video cards that allow the DVD player window to be output to a separate screen in NTSC or S-Video format. Therefore, from your PC you can play video on your video projector or television.

If your TV set is HDCP enabled, you can connect your HDMI device to your DVI TV set by using a HDMI to DVI adapter. It is a small device that you can find in any Hi-fi or TV store. However, remember that sound will not be transported. You will need to use the audio output of your device and the audio input of your TV set. You can connect them together if you use a DVI to HDMI adapter. Please contact your Hi-fi or TV store for more information.

For video, use the component video output of your DVD-Video player and set your DVD-Video player output to progressive scan, if you have a progressive scan DVD-Video player. The selection can be made either by a button on the back panel of the DVD-Video player or via DVD-Video player's menu selection, depending on the your particular model. If your DVD-Video player does not have component video output, then use the S-Video connection.

Digital audio (IEC-958 Type II RCA coax [S/P DIF] or EIAJ CP-340 optical [Toslink]). Raw digital audio (AC-3, MPEG-2, PCM, or optional DTS or SDDS) requires an external decoder or an amplifier/receiver with built-in decoder. (Note: The digital AC-3 audio output is not the same as the RF AC-3 output on laserdisc players.) Component interlaced analog video, NTSC or PAL (YUV: 3 RCA connectors, RGB: SCART connector or 3 RCA).

It depends on your audio/video system and your DVD player. Most DVD players have 2 or 3 video hookup options and 3 audio hookup options. Choose the option with the best quality (indicated below) that is supported by your video and audio systems. Progressive video (very best): Playeres have been announced (but not released) with progressive-scan YUV component video output in the form of 3 BNC or RCA connectors.

Most DVD players include a number of outputs for a dedicated signals. These include S/Video, RGB and Composite. None of these can be directly connected to an RF socket, because they contain a completely different type of signal. It is possible to connect a DVD player up to a television without a dedicated socket, but don't expect to see the stunning picture quality that would be available through the normal route.

Not directly. In order to watch DVDs on your 1600SW and MultiLink, you will need to use your PC, a DVD ROM drive, a DVD decoder (either software or hardware), and DVD playback software.

No, Macrovision will kick-in and render the picture unwatchable. That is unless you defeat Macrovision.

Many customers are having problems. Our technicians can transfer your MiniDVD disc which won't play on your DVD player and create a normal DVD which will. We can also do the same with DVD RAM discs.

quot;Dedicated to the generous hearts of all parents and to our sweet children who enter the world with such trust."

If your DVD player was produced in the past 3 years, you have a 99% chance of it being compatible with DVD-R disks. If your disk doesn’t play, it is because of an incompatibility issue, not a problem with the disk. We urge you to test out the DVD in the player you are going to use BEFORE your special event to ensure you do not accidentally have an incompatibility issues. If the DVD does not play, we would suggest you try the disk in a different DVD player

Over 98% of DVD players on the market support our DVD format. If you purchased your player in the last 2 to 3 years, you will have no problem playing your DVD in your DVD player on on a computer that has a DVD drive. If your DVD and it does not work with your player, simply return the DVD to us, and we'll exchange it for a VHS copy.

Nearly all DVD players are DVD-R compatible. Particularly those sold in the last couple of years. You should check your individual model for compatibility before ordering. If you have an older DVD player that is not DVD-R compatible you might want to treat yourself a more modern machine that will accept all formats. They can be bought for under $50.00. Click here for DVD player compatibility information.