There are a number of requirements that need to be followed. They pertain to type and quantity of material and to the removal process. For more detailed information click on Handling Asbestos Floor Tile and Roofing Materials.

Typically the removal and disposal of that type of asbestos containing material is not regulated by EPA (even commercially) if it is in good condition. If the material can be taken up with no significant breakage, there is little risk for fiber release.

When installed with solid sheathing, a metal roof on your home will silence noise from rain, hail and bad weather as well - if not better - than any other roofing material.

Asphalt shingles, though reasonably priced, don't deliver the best in looks or performance. Wood shakes, though attractive, don't have the fire resistance sought by homeowners and mandated by many local codes. Tiles, though beautiful, are heavy and difficult to install, sometimes leading to breakage and safety problems. Met-Tile gives you the best of all worlds: the look of tile, plus the light weight and high performance of engineered metal roofing.

Our agency allows non-friable asbestos-containing roofing material to be left in place if the material remains non-friable during the demolition. Other government regulatory agencies, such as the Washington State Department of Labor and Industries, may have different requirements.

Asbestos has been used in most 9’ X 9’ tiles, some 12’ X 12’ tiles and in some of the mastics used to glue the floor tiles down. The only way to tell for sure if something contains asbestos is to have it analyzed by a laboratory accredited to do this type of analysis. For more information on accredited laboratories, go to that topic on our Related Asbestos Links page.

We have two options to cover asbestos floor tile. First, our PolyEncase GE-50 is a fast setting, high performance aromatic polyurea, perfect for use on walk on surfaces and heavy traffic areas. The second option is the use of AsbestoSafe® TopCoat, if the old flooring will then be covered over with carpeting, wood flooring, tile or linoleum. AsbestoSafe® and PrepLESS Primer? have been fully tested for use over asbestos-containing materials.

The only sure way to find out if there is asbestos in any product is to take a sample of the product and have it analyzed by a NVLAP approved lab. Advanced Environmental has qualified and licensed inspectors and can take a sample and send it to an approved lab for you.

Galvalume? sheet is an ideal material for roofing because of its extraordinary outdoor corrosion resistance and resulting long life. It can be readily rollformed into a variety of panels, as well as formed and stamped into tile and shingle facsimiles. It can also be factory painted to impart color and extend durability. Most important, it can be used in modern day steel roof designs which are strong, yet light weight.

Actually, there are three key reasons. Three important attributes - thickness, multiple widths and color blends - give DaVinci Slate and Shake the authentic look homeowners want. Thickness: With a 1/2-inch profile, it is twice as thick as any other synthetic… showing more surface detail on the leading edges from almost any viewing angle.

Materials that contain asbestos must be taken to a disposal facility authorized to accept asbestos waste. Our web page at http://www.pscleanair.org/regulated/asbestos/disposal.aspx lists these facilities within our jurisdiction.

Our technicians do not install floor tile, but we can recommend and coordinate with tile contractors to give your bathroom a completely new look.

There is not an asphalt shingle on the market that can match the superior aesthetics of Hanson concrete roof tile. The numerous styles, hundreds of colors and variety of finishes available with roof tile allow you and your designer to create a roof to suit virtually any architectural style or one that is entirely unique. Concrete roof tile has been used for centuries worldwide, and for good reason. Concrete is not only beautiful, but also extremely durable.

Anywhere from natural substances like wood for shakes and shingles; minerals for tile and slate; metal for sheets and shingles; asphalt for shingles and felt; to rubber for sheet-like single ply membranes. Man-made materials include urethanes, styrenes, synthetic rubbers, and plastics

Current Regulations require that work with many asbestos products, particularly asbestos insulation, asbestos coating or asbestos insulating board and all assumed asbestos materials, is carried out by contractors licensed by HSE. Guidance on licensed work is contained in 'A guide to the Asbestos (Licensing) Regulations 1983' as amended (L11). Work being carried out on asbestos cement, which does not require a contractor, needs to comply with the Control of Asbestos at Work Regulations 2002.

Hail can affect asphalt roofing shingles. The damage caused by hail can be classified into two groups: aesthetic damage and functional damage. Aesthetic damage results in slight granule loss and the life of the shingle is usually not affected. Functional damage is characterized by substantial granule loss or cracking or penetration of the shingle. Functional damage may result in short term leaks or a reduction of the life expectancy of the shingle. According to CASMA Technical Bulletin No.

Permits are required for all jobs of $500.00 or more, and a Notice of Commencement is required for all jobs with a value of $2,500.00 or more. Both the Notice of Commencement and the Permit must be posted at the job before any inspections will be completed. Failure to have these documents posted will result in a $30.00 fee and no inspection will be granted until both documents are posted and payment of the fee has been received by the Development and Neighborhood Services Department.

Yes, it is possible. However, there are some conditions which must be adhered to. Existing floors must be overlayed with at least WBP grade plywood. However, marine ply is best. It must have a minimum thickness 19mm, screwed down (not nailed) at 150mm centres. All timber surfaces should be primed on the reverse side and all edges. It is essential that one uses powdered adhesive with a latex additive when tiling onto plywood.

Yes, when proper installation methods are followed. Exterior applications require special precautions and installation methods. Do not install floor tile on exterior walls unless the product specifically recommends this application.

Ceramic tile in either glazed or unglazed form do not need to be sealed. These products are impervious to moisture and topical sealers will not properly adhere to them. Also, you can not change or alter the appearance or the sheen of a ceramic tile by adding a sealer. Therefore, a sealer in not recommended for glazed and unglazed surfaces.

Tile mosaics are a wonderful, lively addition that complements the appearance of your pool. They can be selected and ordered upon your visit to choose waterline tile.

No, we do not recommend doing this, as a wall is generally a P.E.I. 1 tile, that is it has a very low wearing and will not last very long.

Wall tiles are generally more porous, which helps with their adhesion to walls, the glaze is used more for the appearance, and is resistant to detergents etc. On the contrary, floor tiles have low porosity, with low to medium water absorption, which will give them better technical characteristics, as the glaze is more than the look, it is also used to prevent wear and promote scratch resistance.

We would prefer that you did not. Floor heating systems are professionally installed through our trained personnel.

Water and oil will bead up on your floor when sealed as recommended in our Installation Specification Guide. You need only mop it up with a sponge. For routine cleaning vacuum or sweep it, as you would any other natural stone floor or a wood floor. To wipe up, use a non-acid based cleaning product. Warm, soapy water is also fine. AquaMix makes a tile cleaning product, Concentrated Stone & Tile Cleaner, which can be used on your floor. Check their website at www.aquamix.

If the structure of the counter is strong enough to support the weight of the heavier floor tile, then this should be fine.

A tile, whether it be ceramic, porcelain or natural stone is usually a good retainer of heat. Therefore it can often be the warmest floor in your home or building. It depends on the air temperature under the floor and the exposure to sunlight etc. Under-floor heating is a good option to warm your floor but it???s real intention is to provide an efficient, effective heating solution that gives you comfort throughout your home, therefore fulfilling your complete heating requirement.

You can use a two part ???rubber based or latex modified??? flexible adhesive to tile directly onto the timber. (Ensure the product chosen is manufactured specifically for this purpose). The timber will need to be clean and stable. (You will need to confirm floor joists and spans will be acceptable). This option is best suited when there are concerns of adding extra height to the existing floor and/or in smaller areas not subject movement or high traffic.

No paint must be removed off of a concrete floor before tile can be applied. Removal of Paint can be done by scraping it or a shot blaster machine.