Chances are you're looking for a video transcoder, units that convert from component video (YPrPb) to RGBHV or vice versa. Understand that this CANNOT be completed passively (i.e., without power) without signal degradation and loss.

http://www.paranoia.com/~filipg/HTML/REPAIR/ (in the USA) http://ftp.cised.unina.it/pub/electronics/REPAIR/ (better for Non-USA) http://www.hut.fi/~then/circuits/vga2rgbs.html It has the schematic and drivers for VGA to TV adapter. That adapter is for TVs which have RGB inputs, but can be connected to an external RGB-NTSC chip. Raytheon TMC2360 - Documentation is unavailable via the web, but the faxback system (415-988-2123) has it as document number 1129.

A standard CAT5 / CAT5e or CAT6 cable is made for computer network signal transmission where each twisted pair could be of different lengths. Using standard twisted pair cable could cause a color shift known as "skew." We recommend the Altinex No-skew Twisted Pair Cables, CB3150PV or CB5600PL, to minimize color shift (skew) on long cable runs.

There are many factors affecting video signal quality when transmitted from a video source, e.g., camera, VCR, video generator, etc., to a video acceptor - a VCR, video monitor, editing console, etc.: Source and acceptor signal handling quality, Connection cables, Sockets and connectors of the sources and acceptors, Amplifying circuit quality, The distance between source and acceptors, Interference from neighboring appliances.

Signal distribution is needed when one or more signals are to be received at several acceptors. Some examples - in a duplication studio where many copies are made from one master, in shops and at points of sale for advertising and promotion, in railway stations and airports for time and route announcement and in many other applications.

This will alow you to watch NTSC DVD's on displays that do not support NTSC/PAL60 however you may have varying results with this due to the fact that 1 frame is dropped each second during the conversion leading to a slight 'judder' in fast moving or complicated sequences.

There are many video signal formats: Composite, Y/C, YUV (Y, R-Y, B-Y), RGB (S) analog and digital. Component analog video formats (YUV and RGB) are unmodulated signals, where the signal level directly represents the signal intensity, for example, 1 Volt of ???Y??? signal represents a maximal white level. Converting from YUV to RGB and vice versa is relatively simple, and needs only an accurate matrixing system.

Different video standards are used in different countries. Most European countries use PAL, NTSC is used in the US, Japan and some others and SECAM is used mainly in France, and in a few other countries. Each standard uses different color encoding schemes. The most common way to convert between the standards is to use a Standards Converter.

DivX is a codec of AVI file, you can select "XXX to AVI" to begin converting. First please insure you have installed the codec. Then in the "Select AVI codec" dialog, the default codec should be "divx", just press "Done" to add the task to the list. This just because you are using a trial version, to remove message, you need purchase a license code for the software, for further information, please click here to know more.

Video conversion is in the final stages of BETA testing but is already working for a wide range of customers on MPEG and AVI formats. To improve video conversion, make sure that you are using the latest version of Windows Media Player. Also check that the codecs you are using in the video are properly installed on your computer. Finally,check your version of the macromedia flash player. Video requires Flash 6 or higher. For a complete list of supported video formats and codecs, go to

After selecting your video file, you can preview this file on the program. Set the “Starting Time” and the “Finishing Time” by dragging the “Starting Time” bar and the “Finishing Time” bar, and the part you want from the video will be captured. You can also click “Mark Start” and “Mark Finish” while the video file is being played to capture the part you want.

DivX is a codec of AVI file, you can select "All to AVI" to begin converting. First please insure you have installed the codec (You can download it at http://download.divx.com). Then in the Edit Profile dialog, select DivX in the Video Compression Codec list, press the Done button to add the task to the list.

Answer: No. But it can wirelessly extend the range of a WDS network that is being hosted by an AirPort Extreme Base Station or another AirPort Express.

To have a US item run under UK current you need to buy a transformer, a product that you plug into the wall and has a US-style jack at the other end. The transformer will "step down" in voltage from 240 to 120v. From there you may want to plug in a US-style power strip and provide current for sev eral products. Next you need to consider how many watts your transformer is providing (all transformers should clearly indicate this).

A video capture device that is compatible with QuickTime video capture. The performance and video input size will be dependent on your video capture device and the model of your computer. With A/V Macs or FireWire (this includes FireWire PCI cards) equipped Macs and beige-G3 Macs (and later) with a video capture card, you should be able to incorporate 640 X 480 video input.

emitter follower does not invert video signal. try using a common emitter amp [inverts signals 180 deg.]. You are referring to the SK series of universal semiconductor replacements made by Thomson Consumer Electronics. You obtain these through one of their many distributors; for example, MCM, Mouser, or Newark Electronics. To find your replacement, cross-reference the part number in the (cheap) Thomson/SK catalog, and use the substitute indicated.

Signal distribution techniques are mainly related to the signal bandwidth and level. Audio signals are far less prone to distribution problems if they have a large enough level. The audio signal has a bandwidth of 20-20000 Hz, and is not as sensitive to loading as is the video signal. The audio spectrum is defined in a relatively narrow range of frequencies and is, therefore, much easier to handle.

A - You connect it to the SCART input using a SCART cable with RCA inputs, basically you use the same cable used to connect a video camera to your TV.

No. The frequency bandwidth for Internet signal is a separate one from that of video signal, either of the signals will not be affected.

The DAC-100 has the ability to work with either PAL video or NTSC video but it cannot convert one video standard to another. A systems converter is needed to convert video standards. There are numerous reasons why video might not be displaying correctly in your VCR. VCR's typically have several inputs, usually one in the front and several on the rear panel.

Answer: No, though you can turn the transmission strength down to a minimum setting. To prevent unauthorized access, you can turn on wireless security features. Answer: No, but this feature is available to Education customers as an AirPort Extreme Base Station model.

According to the NHTSB, every 84 seconds in the United States there is a lane-change / merging accident. Signal? mirrors are positioned at the eye level of adjacent drivers making them more noticeable than conventional tail lights. In addition, when a turn signal is activated, a flashing chevron appears in the corresponding side mirror to alert drivers in your "blind spot" of your intentions. This signal is also very visible to the rear of the motorcycle.

No, signal amplification is not necessary. The Vysis directly labeled probes have bright signal without any additional detection steps.

Most receivers include an extension cable (5 meters) (feet) to allow you to position the antenna. Optional accessories include an interference filter, a Yagi antenna, 25-meter extension cable, and a low-noise amplifier. The amplifier and Yagi antenna help receive the signal when you're outside the primary coverage area.

We are able to transfer your movies from the following formats: VHS, VHS-C, Video8, Digital8 & Hi-8 video tapes. Just the opposite! The quality of output movie is usually slightly higher but you should not expect a dramatic improvement. We do not perform any additional movie cleaning but digital quantisation itself brings some noise filtering. Of course the higher original quality, the better final result.

Your precious memories will be preserved for at least the next 100 years. Pass them on as an heirloom in your family. Future generations will be thankful you did!

Yes. The PowerCONVERTER will convert AVI and MPEG videos in your presentation to FLV (Flash Video), resulting in a high quality conversion that is much smaller than the original file. Yes. With our player interface, the viewer is able to read the speaker notes as well as view thumbnails for each slide in the presentation.

Well, I bought an Aiwa HV-MX1 off a dealer on the web new about four years ago for about $250, which plays and converts PAL to NTSC and vice versa, and love being able to play things that will simply never be shown or commercially available in NTSC. (And a thirty second hunt on google has multiformat VCRs available for under $200 these days). But as long as it's for your own use, I can't see why any conversion place should refuse to convert it.