Search 5,000,000+ questions and answers.

Frequently Asked Questions

What are the criteria for obtaining IPv6 addresses?

FAQs
advertise the allocation that they will receive as a single prefix if the prefix is to be used on the Internet; have a plan for making sub-allocations to other organisations and/or End Site assignments within two years.
Related Questions

How are IPv6 addresses determined?

IPv6 for Microsoft Windows: Frequently Asked Questions
Site-local addresses are equivalent to private IPv4 addresses and are used within a single site of an organization. Site-local addresses have been deprecated by the Internet Engineering Task Force but current implementations of IPv6 can still use them. Link-local addresses are equivalent to IPv4-based Automatic Private IP Addressing (APIPA) addresses used in current Microsoft operating systems and are used on a link.
Related Questions

Running - IPv6: How to make the IRCd listen on IPv4 addresses?

UnrealIrcd FAQ
Currently, if you have compiled with IPv6 support, and you need to put IPv4 addresses in a special way at some places. This "annoying behavior" might be changed later, so you can use 192.168.0.1 etc again instead of the ::ffff:x.x.x.x stuff. This is currently under consideration. If you are on *BSD (eg: FreeBSD), have compiled with IPv6 ENABLED, and have something like:listen *:6667;and while it's listening on the IPv6 address(es) just fine, connecting to the IPv4 IP on 6667 does not work.
Related Questions

Can I apply now for IPv6 addresses which I will not use immediately?

FAQs
In general, IPv6 address space will only be allocated to organisations which are in a position to deploy an IPv6 infrastructure immediately and provide IPv6 services in the near future.
Related Questions

IPv6 addresses are expressed in various length. Why?

IPv6style:IPv6 FAQs
IPv6 address is expressed differently from IPv4 address. IPv6 address is 128bit. It is separated by ":" as separator to 16bit chunks, and each chunk is expressed in hexadecimal form. But we don't come across IPv6 addresses with a series of "0"s contained.
Related Questions

What are the criteria for obtaining an AS number?

FAQs
RFC1930 states: "An AS is only needed when you have a routing policy which is different from that of your border gateway peers". This means that you will be connecting to two or more ASs with different routing policies. In your request you must show us details of the routing policy you will have when you multi-home in the very near future.
Related Questions

What are the criteria for obtaining corporate financing?

Frequently Asked Questions @ Healy Consultants
While criteria may vary from lender to lender, a company must typically have sound credit history, must have been incorporated for a set minimum number of years, and must be in an industry deemed attractive to lenders. Typically, all applications must be supported by a comprehensive Business Plan (including financials). Healy Consultants can assist in the preparation of all necessary documents to ensure a smooth application process.
Related Questions

What are the criteria for obtaining Canadian citizenship?

Archive pages of WWICS, worldwide immigration consultant gen...
You may apply for Canadian citizenship after you have been physically present in Canada for 3 years out of 4 years prior to your application. As Canada recognizes dual-citizenship you may be able to retain the citizenship of your homeland.
Related Questions

Are there specific criteria for obtaining halal certification?

Malaysia - The Global Halal Market Place
In Malaysia there is a dedicated Halal Standard called MS 1500:2004. It was launched in 2005 and is the world's first such standard. We anticipate that this Halal standard which is acceptable to the OIC member nations could well become the common halal standard for all. This development will also facilitate and promote OIC trade by encouraging OIC food producers to manufacture halal products that confirm to world standards and quality for entry into world markets.
Related Questions

gt; Is there any RFC that specifically addresses SNMP and IPv6 ?

SNMP Faq Part 1 of 2
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/wmisdk/wmi/installing_the_wmi_snmp_provider.asp
Related Questions

I have enough addresses today. Why should I bother implementing IPv6?

Internet Society (ISOC) - Education and Training - FAQ on IP...
IPv6 is an important part of ensuring continued growth and accessibility of your services to the rest of the Internet and emerging markets in particular. As the Internet progressively becomes a dual IPv4/IPv6 network, ensuring that you are IPv6 enabled will be critical for retaining universal Internet connectivity for your clients, users, and subscribers, business partners and suppliers.
Related Questions

What is IPv6?

Internet2 @ Binghamton University: FAQ
Internet Protocol version 6, once referred to as IP Next Generation (IPng), is the next generation IP protocol. Its specifications was completed in 1997 by the Internet Engineering Task Force (IETF). IPv6 is designed to correct some of the shortcomings of IPv4 such as data security and maximum number of Internet addresses. IPv6 increases the address space from 32 to 128 bits and also supports quality of service (QoS) parameters for realtime audio and video.
Related Questions

Innofone : FAQ
IPv6 stands for Internet Protocol version 6. IPv6 governs the addressing and routing of data through a network. IPv6 is intended to replace the IPv4 standard, whose limits on network addresses are beginning to restrict Internet growth and use, especially in China, India, and other heavily populated Asian countries]. But the new standard will improve service all around the globe; for example, by providing future cell phones and mobile devices with their own unique and permanent addresses.
Related Questions

CBN :.
IPv6 is short for "Internet Protocol Version 6". IPv6 is the "next generation" protocol designed by the IETF (The Internet Engineering Task Force; www.ietf.org) to replace the current version Internet Protocol, IP Version 4 ("IPv4"). Most of today's internet uses IPv4, which is now nearly twenty years old. IPv4 has been remarkably resilient in spite of its age, but it is beginning to have problems.
Related Questions

Frequently Asked Questions - Symmetricom QoE Assurance Divis...
Internet Protocol Version 6) The next generation IP protocol. Started in 1991, the specification was completed in 1997 by the Internet Engineering Task Force (IETF). IPv6 is backward compatible with and is designed to fix the shortcomings of IPv4, such as data security and maximum number of user addresses. IPv6 increases the address space from 32 to 128 bits, providing for an unlimited (for all intents and purposes) number of networks and systems.
Related Questions

What are the criteria for obtaining a Federally funded ILS?

Aviation System Standards - Instrument Flight Procedure FAQ'...
New technologies should be considered in lieu of an Instrument Landing System. However, the considerations for a Federally funded ILS are:
Related Questions

What are the eligibility criteria for obtaining federal financial aid?

AIE | Frequently Asked Questions | Paying
TG helps administer the Federal Family Education Loan Program(FFELP) by issuing loan guarantees on Stafford, PLUS and Consolidation Loans to eligible lending institutions. In order to apply for financial aid, students must first complete the Free Application For Federal Student Aid(FAFSA) at www.fafsa.ed.gov.
Related Questions

Xap Student Center :: frequently asked questions
have a high school diploma or a General Education Development (GED) certificate, or pass an independently administered test approved by the U.S. Department of Education, or meet other standards your state establishes that are approved by the U.S.
Related Questions

Ques 5. What is the criteria for obtaining Franchise Licence?

Center for Advance Learning in Computers (CAL-C)...
Ans: Refer ‘Pre-requisites for New Centers’ under link ‘Franchisee – Prospective’.
Related Questions

What is my IPv6 address?

IPv6 for Microsoft Windows: Frequently Asked Questions
By default, IPv6 configures link-local IPv6 addresses for each IPv6 interface. Link-local addresses have the prefix FE80::/64. Additional global or unique local addresses might also be configured depending on whether you have routers that are sending Router Advertisement messages. For Windows Vista, Windows Server 2008, Windows Server 2003, Windows XP with SP2, and Windows XP with SP1, you can use the ipconfig command to view your IPv6 addresses.
Related Questions

How do I send IPv6 traffic without an IPv6 router?

IPv6 for Microsoft Windows: Frequently Asked Questions
Without an IPv6 router, you can send traffic between two hosts on the same subnet (or link) using their link-local addresses. To send IPv4-encapsulated IPv6 traffic between hosts on different subnets over an existing IPv4 routing infrastructure, you can use the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP). For more information, see the IPv6 Transition Technologies white paper.
Related Questions

K2. How can I use fetchmail with IPv6 and IPsec?

The Fetchmail FAQ
To use fetchmail with IPv6, you need a system that supports IPv6, the "Basic Socket Interface Extensions for IPv6" (RFC 2133). This currently means that you need to have a BSD/OS or NetBSD system with the NRL IPv6+IPsec software distribution or a Linux system with a 2.2 or later kernel and net-tools. It should not be hard to build fetchmail on other IPv6 implementations if you can port the inet6-apps kit.
Related Questions

How do I enable IPv6 routing?

IPv6 for Microsoft Windows: Frequently Asked Questions
To enable IPv6 routing, you must use the netsh interface ipv6 set interface command to enable forwarding and advertising on the appropriate interfaces, and then use the netsh interface ipv6 add routes command to configure subnet prefixes to publish. To have an IPv6 router running Windows advertise itself as a default router, you must configure a default route and publish it.
Related Questions

Is IPv6 Support done?

Paul Sladen: vserver FAQ
No. Although it should be very easy to basically copy across the code from the IPv4 mangling. If anyone fancies doing it should basically be a cut and paste job. Jacque's last offical statement was in this thread: Some people consider this a kludge; it is achieved by the addition of the following code to 'fs/namei.c' in the kernel source: /* A dir with permission bit all 0s is a dead zone for process running in a vserver. By doing chmod 000 /vservers you fix the "escape from chroot" bug.
Related Questions

Who created IPv6?

Innofone : FAQ
In late 1990, The Internet Engineering Task Force (IETF), together with engineers from within the Internet community, recognized the usage trends and the then current shortcomings of the Internet. Rather than scrap the existing Internet, these people wanted to maintain all the good things about it, while extending its capabilities. To do this they created IPv6.
Related Questions

Got A Question? Ask Our Community!


More Questions >>

© Copyright 2007-2008 QueryCAT
About • Webmasters • Contact