Yes. Use "Metroflor Matte" to finish TrafficMaster vinyl floors to increase brightness, but when using, cover the entire area. Use "Tile Lab Hi-Gloss" to finish Newport, Riviera, and Images floors to increase brightness, but when using, cover the entire area.

We recommend using a non-rinsing cleaner that leaves no film. We suggest that you vacuum, sweep or dust mop more frequently. Wipe up food or other spills immediately using a non-abrasive cleaner and a soft cloth. You should NEVER USE ABRASIVE CLEANERS, POWDERS, OIL CLEANERS, WAXES OR DISH DETERGENT; this will scratch the surface or leave a film.

It is better to remove the existing vinyl, but if it does not cause a transition problem from one floor to the next and/or if it does not cause a problem with the installation or removal of appliances and doors then it can be done. Keep in mind though that you may want to remove and raise your base boards so they have the proper reveal.

New tongue and groove strip flooring and parquetry products are best finished with water-based urethane finish or oil type sealers.

Vinyl flooring and vinyl tile surfaces should not be painted. The composition of these surfaces prevents proper adhesion of paints. Direct impact, abrasion from foot traffic as well as flexing of the floor can result. Factors such as actual temperatures, humidity levels and even air movement all contribute to the drying of an alkyd resin. In addition, the thickness of the newly applied coat and the porosity of the surface will also impact the time needed for an oil-base product to set up.

If your original vinyl floor was installed using a full spread adhesive method, then you can apply an embossing leveler to the original vinyl to smooth it out and then install the new vinyl.

If your hardwood floor's finish becomes dull and scratched you can restore the finish by a light screening and recoat of the urethane.

Subject to manucturer's recommendation Thermonet can be used with most floor finishes, including stone, ceramic, porcelain, laminates, engineered timber, carpet, vinyl and so on.

Ultimately the decision is yours. We believe all wood should be stained because it seals better & enhances its beauty. Stain is an upgrade and does cost more. If your decor supports a natural finish, we will be happy to accommodate you.

Wipe up spills immediately to help prevent stains. The longer a stain sits, the tougher it will be to remove from the surface. Follow the instructions on the bottle and do not over-mix or your cleaning solution may leave a dulling film. Avoid soaps, cleaning powders and detergent products as they will leave a dulling film. Although the no-rinse cleaners do not need rinsing, rinsing will provide a better shine.

The Basement De-Watering System? is the ideal solution for carpeted basements. If the carpet has not been destroyed by years of water damage, enough of it can be moved or removed to provide clearance for the Basement De-Watering System?. Some carpets must be trimmed and replaced after the installation. If vinyl flooring has survived past seepage, it will be trimmed about 2 1/2" from the wall before the Basement De-Watering System? is installed.

You can use primer to prepare a sub-floor for vinyl tile. It aids in preparing the floor for the adhesive. We recommend Jasco Primer. NEVER USE A SEALER! TrafficMaster Pro Basement Proofer is a type of primer that acts like a sealer, but allows adhesion of the tile to concrete floors. Most importantly, it helps prevent moisture from getting between tiles and the sub-floor.

Concrete Floors must not contain a sealer or finish of any kind. For installing below grade (below floor level, like in basements), we recommend Basement Proofer to prepare concrete floors. First, clean the sub-floor for any remaining dirt and grease. Tiles must be in the room of installation for at least 2 days to stabilize temperature. Never use polyurethane over vinyl tile.

Yes and no. Is the vinyl flooring is tightly secured to the subfloor? Does the vinyl flooring have a thick cushion attached? If the vinyl floor is thin and well secured to the subfloor you may be able to float a wood floor over it. In some situations you may be able nail/staple a wood floor over it also. If the wood subfloor is sound you may be able to nail a solid wood floor over the top.

Condensation on windows is caused by high humidity levels in the home. It is not the installation of new windows that is at fault. If the humidity levels are too high there can be some condensation forming on the glass surface or window frames. Proper ventilation techniques are need to control the humidity level in your home.

This is one of the toughest questions in hardwood floors because the answer is generally "No". Floor finish does not lend itself to be "spot repaired" similar to that of a ding or scratch in the paint of you car. The correct way to fix scratches is by repairing the area and recoating the adjoining floors (which often extends into many other rooms).

These are the most popular choice and involve applying a stain to achieve a particular color, followed by a top coat of polyurethane or varnish to give a protective coat. Surface finishes are durable, they resist moisture, and are easy to maintain. There are four options for the top coat, and each has its own benefits: OIL-BASED URETHANE is the most commonly used floor finish.

A : You can use ceramic tiles, porcelain, marble, travertine, granite, terracotta, sandstone, all natural stones, wood and wood laminates laid on a cemented screeded floor. I would not recommend rubber and cork materials.

The concrete cover can be troweled to a smooth finish or a skin coat of lightweight concrete can be placed, for a finished appearance. When applying finishes or materials directly to the concrete cover, always follow the manufacturer's instructions for proper application. If the floor is being carpeted, 1/2" plywood should be placed, anchored directly to the concrete with mastic or masonry nails.

You may be able to renew a dull finish without completely refinishing the floor. Still, some hardwood floor manufacturers recommend that only professional refinishers tackle the job. If you decide to do it yourself, begin by sweeping with a good broom and then vacuuming the surface. Next, use a buffer with an abrasive pad and/or fine-grit sand paper until the finish feels smooth. Another option would be to use a rectangular oscillating sanding machine.

Watch high-wear areas such as stairs, hallways and in front of kitchen sinks for the first signs of dulling of the finish- this is an indication that it's time to re-finish those areas.

One of the hopes I have for having quit my Day Job is to eventually free enough time to resume writing gaming articles for the site. The New World articles are at or near the top of my list for revival should that happen. I don't know that the world will ever be truly "finished", but I expect to complete the series at some time when the remaining steps to finish one's own world would be self-evident. Top

All races share the same finish in beautiful Chumash Park. Look for the large red arch. All races finish on the grass. For spectators, the last tenth of a mile is highly visible from many locations in the park.

BAMBOO DIRECT FLOORING solid planks are pre-finished with a 6 stage, water-based, UV-cured acrylic urethane. Manufactured in Germany by Treffert, this is a high quality product that will perform well for many years. For specifics on the Treffert floor finish product, please click here.

Replace all narrow furniture rests with wide-bearing ones. Support furniture with wide-bearing, non-staining floor protectors. It is recommended that all furniture protectors be at least one inch in diameter, made of non-pigmented hard plastic, and rest flat on the floor. Non-staining felt protectors are also acceptable. Casters with a minimum ¾” flat surface width or floor protectors are recommended for all moveable furniture. Metal floor protectors are generally not recommended.

When the vinyl is firmly adhered to the floor and all contaminants and waxes have been stripped from the floor. If the vinyl is “cushioned,” it should be removed. Bear in mind that some older vinyl may contain asbestos, which can be dangerous if inhaled. In unsure, contact a professional.

Yes, Armstrong® Floor Cleaner can be used on most vinyl floors. However, we do not recommend using Armstrong® Floor Cleaner on vinyl laminate flooring.

No, however the application of 2 to 3 three coats of a floor sealer will give the floor a high gloss appearance and make cleaning slightly easier in the long term. For information on our recommended sealers and polishes please click here. [top]

Yes, but ONLY if appropriate basement proofer is used to prepare the concrete before laying the tile. Vinyl tile can not be laid on top of a preexisting tiled floor below grade.

We generally recommend that the underlayment be removed because the subfloor may mot be adequate to support tile; however if your existing vinyl floor was installed over an adequate subfloor using a full spread installation method then yes, it can be done if you use the proper installation products.