Carpetiles are approximately 3/8" thick. Their tough, but flexible vinyl backing makes them easy to cut and easy to install.

Once the 10+” of wool layers are stuffed into the cotton cover, the final thickness of the Cuddle Ewe Underquilt is approximately 3”. With use, the Cuddle Ewe Underquilt will compress to a thickness of about 1.5” to 2”. This is very normal and to be expected. Once the wool has compressed, there is nothing that can be done to re-fluff it, but it will still be comfortable. With proper care, you can maintain the Cuddle Ewe’s loftiness for a long time.

All Carpetiles are made from 100% Nylon Type 6,6 fiber and have a skid resistant vinyl backing for ease of installation.

We sell only First Quality Carpetiles. All Carpetiles are packaged in Factory Fresh Cartons. Their origin of manufacture, pattern, and color are clearly identified on each carton. All Carpetiles carry a full manufacturer's 10 Year Wear Warranty. For additional warranty information, please call our customer response center @ 1-866-575-7738.

Since edge thickness is a function of lens power, centre thickness and curvature of the front and back curves (all inter-related) the edge thickness is influenced by the following features:

Carpetiles are available in 18" x 18", 24" x 24", as well as 36" x 36" sizes. Weights of each carton vary according to the size of the Carpetile, number of pieces per carton, and type of backing system. Weights will vary from 54 - 90 lbs per carton. For additional information on the Carpetile you have chosen, please call our Customer Response Center @ 1-866-575-7738

All Carpetiles are thoroughly tested to conform to the latest commercial requirements concerning wearability, cleanability, as well as the appropriate Federal and State regulated testing requirements for flammability.

Carpetiles are naturally Non-Allergenic. They are manufactured from 100% Premium Nylon Face Fiber, which is then fused on to a tough but flexible vinyl backing. The Dense Low Profile Commercial Grade Construction keeps soil and dust on the surface where it may be easily vacuumed off. All Carpetiles conform to the Carpet & Rug Institute's Green Label Program.

Our Recommended i-Stik Double Sided Carpet Tape for Do-It-Yourselfers is applied to a dust-free subfloor, not to each tile. Just place the tape around the perimeter of your floor, (sticky side down) Then form a grid of tape across the center of your floor. The space between the strips forming the grid may be approximately 3' to 6' apart depending upon the size of your room.

All Carpetiles are modular products. Obviously, when joined together Carpetiles form seams. The type of pattern selection and desired design is of primary importance in minimizing or accentuating the visibility of those seams. However, accentuation of seams can produce a pleasing result with the proper planning. There are five primary types of patterns available in Carpetiles.

Carpetiles are designed to be laid directly to the subfloor, whether it be concrete or wood. Padding cannot be used with Carpetiles. Carpetiles come with their own skid resistant vinyl backing. Ask about our special "Cushion Backed Carpetiles" designed for underfoot comfort and shock resistance. For additional installation information, please go to the Installation Section of our web site or call our Customer Response Center @ 1-866-575-7738

Carpetiles may be installed on the (horizontal surface) stair tread as well as the (vertical surface) riser. A metal or vinyl stair nosing may then be applied to cover the two exposed surfaces. Carpetiles are not designed to wrap around each step. Only to cover flat surfaces. For additional installation information, please go to the Installation Section of our web site or call our Customer Response Center @ 1-866-575-7738

While it is not recommended to use any carpeting product in areas that are constantly damp, Carpetiles can be removed easily in the event of temporary flooding and can be dried out rather quickly. When the area is dry again, they can be put right back down. Wall to wall carpeting, under these circumstances, would have to be thoroughly vacuumed with a wet/dry vac and fan-dried.

Carpetiles are designed for indoor use. If you have a covered screened in porch, our Carpetiles work well when coupled with our Special i-Stick Double Sided Tape method. Using our tape installation procedure, you may temporarily remove any tiles that may have gotten wet. Drying the Carpetiles is a simple process. Simply remove the tile, dry it off with a cloth or paper towel, then stand it on it's side for thorough drying. When the tile is dry, you may place it back in it's original position.

The model name label for all HealthSmart™ Beds includes the thickness designation of the top after the model name. For example - Haverville™ Luxury Firm 1X. The model name label is sewn into the lower right side of the HealthSmart™ Top. this time, Simmons manufactures HealthSmart™ Beds with a specific thickness of removable top. Higher end models will have thicker tops as part of the luxury step-up within the line.

A prospective, randomised, controlled trial of 92 patients with full-thickness pressure ulcers set out to compare the efficacy of an alginate wound dressing with an established local treatment with dextranomer paste. During treatment, a minimal 40% reduction in wound area was obtained in 74% of the patients in the alginate group and in 42% of those in the dextranomer group. The median time taken to achieve this goal was four weeks with alginate and more than eight weeks in the control group.

Material thickness ranges from .30mm to .75mm depending upon the stresses a particular part is subjected to.

Foam cores are available 1" foam to 12". Typically SIP foam thickness matches out to dimensional sizes then the OSB adds another 1" total.

The flat panels are 1 inch thick. Where the latches hit...the latches drop down into the bed approx another ½ inch (for a total of 1 ½ inches only at the latch mechanism). When the cover is completely closed, the cover sits level with the side rails so the cover is completely flat. Depending on the size of the cover, the weight runs from a minimum of 35 lbs and up to 45 lbs for the long beds. A good rule of thumb is that for a full size truck with a short (6.5 ft.

The thickness of the fiberglass varies. The parts that require assembly of more than one component piece are usually thinner at the mating areas, but the overall piece becomes stronger when the pieces are bonded together. Some parts such as inner fenders and outer fenders do not need to be too thick. In the assembly process sometimes the thickness is a deterent and the parts must be ground to get them to fit properly.

Yes, overlays are only 1/16" to 1/2" as a standard. Thicker applications applied only to level.

The stone is available in two thicknesses: ¾ inch and 1 ¼", 2cm and 3cm respectively. Granite flooring tile is 3/8" thick and usually 12" X 12".

Kirby Standard cladding thickness is 26G and 24G. These are available in stock in various colors. Other thick nesses can be offered as special order with comparatively longer delivery.

Glass blocks come in 2Â", 3Â" and 4Â" nominal thickness because different products and applications require different thickness. CrystaLok windows have an adjustable frame and can use all three sizes, but 2Â" is the lightest and easiest to install in large windows. REDI2SET windows use 3Â" block because they come in the most number of face sizes giving REDI2SET windows greater flexibility to fit into existing openings.

Optical thickness or optical depth describes how much light passes through a material. Since the amount of light that passes through a material can be quite small (less than a fraction of 1%) or very large (nearly 100%), optical thickness is based on a logarithmic scale. There are various definitions. When the optical thickness of the atmosphere is measured, the usual definition is that the optical thickness is -ln T, where T is the transmission of the atmosphere. If T is 0.

Vapor Tech coatings are virtually dimensionless. They can be as thin as 50 nanometers (5x10-8 meters). This is about 1/500th the thickness of the human hair. The coating can be controlled to as thick as 50 microns (5X10-5 meters). This is about twice the thickness of a human hair.