Meter to feet Length ratio=3.3 (One meter equals 3.3 feet) Sq.meter to sq.feet area ratio= 10.76 (One square meter equals 10.76 square feet) In order to get the feet equivalent, you just have to multiply the meter amount with the length ratio (3.3) to get the amount of feet, or divide the feet amount by the length ratio to get the meter amount. For areas and spaces, just multiply the square meter amount with the area ratio (10.

Very easy. 100 square meters is 1076 square feet. Surfaces are given in square meters, written m2 or m2.

All AstroRide and AstroSlide is priced per square meter. To help you in your estimates a meter is approximately 3.25 feet. A square meter is approximately 10 square feet.

Right click on the layer you want to perform a calculation in. Then chose the Open Attribute Table option. Once in the Attribute Table, decide the column(s) in which any calculations need to be made. If you only want certain records within this column to be calculated, select them at this point, otherwise, the entire column will be calculated. If you want to be able to undo any calculations made, start an editing session (Editor-Start Editing).

By best approximation, to get sq. meters, divide sq. ft by 10.75, or multiply sq. meters by 10.75 to get sq. ft. The conversion rate is currently 44 INR to one dollar. This is a fluctuating rate. Divide INR by 44 to get close approximation of prices in U.S. dollars. To get the current rate go to: http://wam.org.

Each solar module is approximately 5 feet (1.5 meters) long and 2½ feet (0.75 meters) wide. The modules are always grouped in a set of four, and the minimum number of modules for our smallest system is twelve modules. This requires an area of at least 120 square feet (11 square meters).

One device is adequate for the treatment of max. 150 cubic meters room.(about 450 sqft). However, it is recommended to use it close to you in the room

Generally speaking, for an adequate air exchange rate, you can expect up to 500 sq. ft. coverage for the SE400E, and around 700 sq. ft. for the SE800E. - based on moderate concentration levels w/ 8 ft. ceilings. Individual results will vary based on environmental variables. To find out how many of which air cleaner you need, try our air cleaner calculator in the Buyer's Guide.

You can have as much land as you choose. Change the amount of land you have and your monthly fee will adjust accordingly. See Virtual Land: Cost.

kW is more or less equal to 10-20 m² depending on the insulation of the house. It is recommendable to choose a smaller stove as the combustion will get cleaner if you fire hard in a small stove instead of slumber use in a large stove.

The bezel of the re-issue SUB 300T has graduations in Meters. There are 2 major diving institutes in the world; SSI and PADI, their courses adhere to the metric system. This was the reason for DOXA to choose the metric bezels but after they received lots of inquiries regarding a SUB 300T bezel with Feet graduations, they decided that the new SUBXXX bezels will be available in Feet, as they were on the original watch.

For units that have been purchased after 2000, when you open the cap (not the battery end) there will be 4 switches on the opposite side of the circuit board from where the cap snaps in. The 2nd switch from the right (or the 3rd switch from the left) is the unit of measure switch. For Meters, push the switch back (away from you), and for Feet, pull the switch forward (towards you).

a. Yes it is quick and easy, trace with the stylus pen around the area and the program calculates the square feet of any area, also trace along any straight or curved length and the program calculates the exact linear feet.

The Allergy Machine™, HealthMate™ and HealthMate+™ have 60 Sq. Ft. The HealthMate Jr™ Model has 30 Sq. Ft.

Truthfully, that can only be best done if the entire floor plan of the home, insulation value and needs are all considered. It is always best to speak with a dealer, tell them about your home, life style and describe what your goals are for heating with wood.

There are 43,560 square feet in one acre. Therefore, if the size of a property is 0.20 acre, then it would measure 8,712 square feet (43,560 x 0.20 = 8,712).

We go by unit price and not by square feet due to the fact that square footage is not accurate and often works out to be more expensive. If you have a lot of windows, we can offer a volume discount. Unit price varies depending on how many windows you do and what is involved.

The Ski Suites (1 - 2 people) are approximately 350 square feet. The One Bedroom condos (2 - 4 people) are approximately 525 square feet. The Two Bedroom condos (4 - 6 people) are approximately 825 - 1000 square feet.

The square footage given for each plan is based on heated floor space. This does not include decks, porches or garages. Due to varying methods of calculating the total square footage, it is recommended that final area calculations be done by you and your builder. The room dimensions given on the floor plans are rounded to the nearest inch. As you will see, it is not always possible to give specific room dimensions due to the open nature of some floor plans.

Depending upon the type of material and the accuracy of the rough grade provided the Laser Grader can grade up to 50,000 S.F. per day. Northeast Laser Grading offers high precision grading for supermarkets, warehouses, parking lots, athletic fields (football, baseball, soccer), tennis courts, horse arenas and more. Serving the northeast, including Maine, New Hampshire, Massachusetts, Vermont, Connecticut, Rhode Island, New York, Pennsylvania and more.

One of our sales representatives will come out to your house and measure. From the measurement they can let you know how much square footage is needed. If you want to know the exact formula, just ask... they will be happy to teach you. You may also draw a rough sketch with measurements and fax it to us. Just be sure to include your contact information.

Exhibition Room 1 measures about 264 square meters, Exhibition Room 2 measures about 165 square meters.

Generally on a floor you should get about 250 to 500 square feet per set ( 2-five's of powder and 1-five of liquid.)

The liter makes enough pre-burnish for 51,000 square feet or it will dilute down to make 135 gallons of ready to use mopping detergent.

NET square footage calculations are defined here as the usable square footage of a given condominium unit, otherwise referred to as "paint-to-paint" measurements between all interior walls. NET square footage calculations are calculated by the architect's computer-aided design (CAD) software, and are close approximations of what will be built, but are not precise.

Individual unit specifications reflect effective square footage coverage based on a relatively unpolluted environment. The amount of pollution, air flow conditions, and the specific layout of the environment will determine the number and size of units needed. As stated before, it is usually best to start with bigger equipment than necessary and adjust accordingly to the needs of your environment. For example, if your house is 2,000 sq.ft., you could get a unit that easily covers up to 3,000 sq.

Up until now, the Federal State Cooperative Service data, on which I base the ratings, did not include such measures. For details, see the building size page.

The heater model and capacity are not necessarily a function of the square footage of the area needing to be heated. The model generally is chosen after the Btu/hr heat loss for the building or spot area to be heated has been determined, which is a function of not only the size of the area, but geographic location, building materials, building usage and other factors. Area coverage could be as little as 500 sq. ft. or as much as 10,000 sq. ft.

The number of square feet of paving stones on a skid varies according to the style. Click here to view our line of paving stones