The best way to change the sound of your speakers is to change where you put them. Ideally, the speakers should be located at ear level, in front of you, squared off between you. It's then a matter of fiddling with: Other than that, speaker modifications can be a can of worms, or can produce very subtle changes, which you might prefer. For example, you might improve a speaker by adding some cross braces of 1"x1" wood from left to right and from front to back.

The sizes and impedances of the speakers are rather unusual. The amplifier may not like, or may not perform the way it should, if speakers of different impedances are used instead of the standard speakers. The information the tables below were taken from the 95 workshop manual for model year 1999. The sum of all amplifier powers does not add up to the marketing power numbers.

Adding higher-quality speakers, especially if you add a powered subwoofer, will improve the sound quality without a sound card upgrade. If you want to add Dolby Digital surround sound and your existing sound card is not compatible, you will need to consider a card upgrade.

If you're looking to "tweak" your system for optimal performance, you should be aware of some of the great features that several speaker manufacturers offer. For improved imaging, many tweeters come in adjustable mounts that let you focus high frequencies more precisely to your listening position. Some speakers have bi-amp inputs, so you can power the woofer and tweeter from separate amplifiers for more powerful sound. Try a set of Bass Blockers.

In order to hear the audio components of our web site, your PC must be equipped with a 16-bit or better sound card and speakers. (Macintosh computers have built-in sound capability).

If you can't hear sound from your speakers, it means the speakers are not connected properly, the sound card isn't setup correctly, or the speakers could be defective. First, check the speaker-to-computer connections. Make sure the cable connected to the "Audio In" jack on the speakers is also connected to the "Speaker Out" or "Line Out" jack on the sound card. You can test the sound card jack by connecting headphones to it.

No Audio Out of Speakers At Times (Reprogram Radio and/or Replace Amplifier) #02-08-44-020B - (02/27/2003) Table 1: Silverado, Tahoe, Suburban, Avalanche, Express, Sierra (except Denali), Yukon (except Denali), Yukon XL (except Denali), Savana (with UB0, UB1 or UC6 Sound Systems without Y91 Option) Table 2: Yukon Denali, Yukon Denali XL, Sierra Denali, Escalade, Escalade EXT (with UQ7 Premium Sound System with Y91) This bulletin is being revised to clarify the models and the approved repair proc.

The test mode is activated by holding the RADIO button and turning on power. The head unit now enters a test mode sending audio to the amplifier in the following repeating sequence: The head unit continues to function as normal, except for this sequencing of the audio outputs. Turning off the head unit will leave the test mode.

If you can't hear sound from your speakers, it means the speakers are not connected properly, the sound card isn't setup correctly, or the speakers could be defective. First, check the speaker-to-computer connections. Make sure the cable connected to the "Audio In" jack on the speakers is also connected to the "Speaker Out" or "Line Out" jack on the sound card. You can test the sound card jack by connecting headphones to it.

The AC adapter is plugged into an AC outlet you know has power (don't laugh, I'm guilty of this one myself). Both ends of the cable from your computer to the speakers is pushed in all the way (subwoofer and computer). The cable going to your computer's sound card is plugged into the speaker out plug (not the line out, line in, digital in or out, or microphone plug). With sound cards capable of feeding more than two speakers, make sure the speaker plug you choose is for the front speakers.

No, The carpet covering we use is Acoustically Transparent and will not muffle the sound of a good quality pair of speakers, you may find a slight reduction in very high frequency's that you most probably wouldn't hear anyway.

No problem! As you can see below, we run an animated caption across the bottom of the browser of what the my Virtual Sales person™ is saying.

You can bring your own "home stereo" equipment (you may not exceed the electricity limit). Read more at the Rules page section "Music Loudness".

Component speakers, also call separates, are a separate midrange and tweeter. The midrange can be mounted in the factory opening and the tweeter up higher on the door or dashboard. Component speakers are typically better sounding because the audio signal is split up so that the midrange frequencies are routed to the midrange speaker and the high frequencies are sent to the tweeter via a crossover. This allows each speaker to play the frequencies they were designed for.

See the document ???How To Calibrate Your Surround Speaker System Using Adobe Premiere ??? from Kelly Industries. [edit]

We strongly recommend that you use a PC headset, IP Phone or USB phone to make calls. This will significantly reduce any echo caused by the sound from the PC speakers. It will also give you privacy during calls. We offer a range of quality headsets to suit every budget. Just visit our shop to find out more. You should also try to avoid making phone calls during peak hours (6PM to 8PM).

then Participant Mute On/Off - If you are in a noisy environment or on a mobile phone, all participants can mute their own line when not speaking. This will reduce background noise levels in the conference call. Try not to use a speaker phone. If unavoidable, use the mute function stated above when not speaking and move away any projectors from the microphones.

The most common cause of a poor quality call is a poor quality internet connection. You can find out your IP address here www.whatismyipaddress.com - if you contact our support team and let them know your IP address, they will run some tests on your connection.

One of the factors that can affect sound quality is the Internet bandwidth available during your call. Try to avoid making calls during peak Internet usage hours when traffic is high. Another tip is to use a headset with a built-in microphone. This will help eliminate echo and ensure better sound. Adjust the microphone volume so that your speech is not too loud.

You can set your quality settings in the Settings -> Broadcast settings window. Here you must compromise how many listeners you want to support with how good a signal you want to provide those listeners who you allow to connect. Upgrade your net connection. Quality is a function of the amount of data you are able to broadcast to those who connect to your station. The more data you are able to push, the better sounding your broadcast will be.

The method employed to improve the sound insulation between two areas depends on the situation. For this reason, the advice of a competent person should be sought at an early stage. Following are general guidelines to consider in improving sound insulation. In general, applying sound absorbing treatments will not greatly improve insulation conditions. Typically, blocking the transmission of sound by introducing barriers is the most beneficial route to take.

A high-quality full-duplex sound card, and be sure you are using the latest drivers (check with the sound card manufacturer). Go to Sounds and Multimedia on your PC (Start/Settings/Control Panel). Check that the master volume is sufficiently high. You may get this error due to a missing file on your computer system.

Try to close other applications that are in running on your PC that could be using excessive internet bandwidth or processing power that may be affecting the softphone.

At best, VoiceCOM's sound is about telephone quality. There are many things that can affect VoiceCOM's performance, but there are a couple of things that you can try to reduce the "gap" in transmission and reception. First, try rebooting your computer before connecting to the VPC. Some lingering programs and/or memory leaks tend to interfere with Roger Wilco (RW). Next, set RW at High CPU Priority (Adjust tab: Configure button).

When you can only hear sound from the front speakers, it usually means the sound card does not support surround sound, and/or the sound card is not configured correctly, the speakers are connected incorrectly or the speakers could be defective. First, make sure your sound card supports surround sound 4.1. A surround sound card should have a front and rear speaker jack.

Sometimes during the set up the USB connected Netphone overrides the default sound card so all your sound comes out of the Netphone The most likely cause is that you are behind a firewall or have some firewall software running (eg ZoneAlarm). You need to either shut off your firewall or have your PC expert configure your firewall to accept incoming calls to the phone.