Yes- The phone should work properly when plugged into a USB hub. If experiencing problems with a vPhone using a USB hub, plug the vPhone directly into the computers USB port.

Yes- The IP Phone Adaptor should work properly when plugged into a USB hub. If experiencing problems with a IP Phone Adaptor using a USB hub, plug the vPhone directly into the computers USB port.

All computers are equipped with multiple ports for inserting USB devices. Most workstations have a USB cable that is attached to the table for more convenient access to the ports.

Although it should work through a hub, various factors could cause it to be unreliable. If you have any problems, try plugging it directly into a USB port on your PC.

Yes, the USB cable can be used with a hub, rather than connected directly into a port on the computer.

No, the USB port will support only one user. If you need to support multiple computers you need to use the Ethernet port and a hub/switch.

A USB hub typically consists of a single upstream port (designed to connect directly to your computer or to another hub) and multiple downstream ports. D-Link provides both 4-port (DSB-H4) and 7-port (DSB-7) models. It allows you to expand the number of devices you can attach to your computer.

Yes, as long as the hub uses an external power supply. We do not recommend or support this configuration. Before requesting help from Technical Support, please try connecting the device directly to the computer's USB port.

You need to be using an Ethernet connection to use our service. If your Internet modem only has a USB port, you can purchase a â??USB to Ethernetâ?? converter to connect to a router. Then you can connect your computer and the SPA-2000 to the router.

The short answer to this is no and the long answer is maybe. As the USB port is un-powered, this rules out a lot of the more interesting applications such as WiFi. The primary use will probably be for transferring files and similar data uses. That's not to say other uses won't appear. Where's there's a will, there's usually a way!

Only if your hub doesn't do internal crossing.. most Hubs now a days do it for you already. So if you were to plug a crossover into a hub, you'd probably get bad collisions and your network just wouldn't work.

All DigitalPersona readers will work with a self-powered hub. Self-powered hubs include a power adapter which is plugged into a wall outlet.

This is a phone set that get connected to the USB port on your PC. You need to install the PC2Phone dialer for the USB phone to function. [top]

The answer is no, your AC/USB Boostaroo isn't defective. What you are hearing is the transient noise that your PC produces naturally through oscillation of your power supply and the hard drive whine caused by its mechanical spin. These noises are much more common in older PC's, but a lot of newer PC's have noise filters built into the PC's USB ports, which eliminates these noises. If this problem is occurring, we recommend using the AC power supply for your Boostaroo instead of the USB cable.

Use the KeyCarbon USB just like a regular USB extension cable - unplug the USB keyboard, plug it into one end of the extension cable, then plug the USB extension cable back into the PC.

ROCKEY works fine with most USB hubs. On rare occasions the dongle may not be detected through the hub due to inadequate output voltage. Please check the integrity of the USB port by trying a different USB device in the same port. For USB 2.0 hubs in particular, please make sure that the power supply is connected.

Yes, the OneTouch USB Cable can be used with a hub, rather than connected directly into a port on the computer. With the 9-pin serial cable, just plug it into your meter and the serial port (COM port) of your computer. You may need to restart your computer if another device had been using the serial port. With the OneTouch USB Cable, you must install a software driver before using it for the first time.

The Andrea USB adapter is a half duplex device which means that it does not allow you to listen and talk at the same time. Part of the reason the Adapter works so well with our mask is that it does not have additional computer to audio signals to corrupt the input signal from the Sylencer. Instead, it provides a jack and adapter cord (with pink ends) that will plug into the USB wire side of the adapter that plugs into your computer sound card.

None of this has been asked by journalists and Sony hasn't mentioned it so it's fairly sure to say "no" to this one. Making it impossible makes sure that people buy more Memory Sticks.

First, try plugging the USB Drive into the port that is most convenient for you. If your computer does not recognize your USB Drive, it maybe due to a lack of power provided from that specific port. USB ports located on keyboards or on the front of your computer may have insufficient power to run a USB Drive. Try using a port on the back of your system if the USB Drive is not being recognized.

You can power your BibleStick through the USB port on your computer (and save your battery), but it won't recognize your BIbleStick as a data storage device, so you can't erase this and put something else on it.

Halleck Undergraduate Bistro, also known as The HUB, is located adjacent to the Cafeteria in Halleck Student Center. The HUB offers students a relaxing atmosphere in which they can enjoy a variety of sandwiches, salads, beverages, snacks, "Sub Connection" subs, "Freshens" frozen fruit smoothies and ice creams, and "Pretzel Logic" gourmet soft pretzels.

The BizDSL high-speed modem is designed to plug into a Network Interface Card (NIC). If you want to have your PLDT BizDSL service connection accessible by all computers on your internal network, it is recommended that you obtain a second NIC card for one computer and have it act as a gateway server and route all high speed traffic through that machine. The PLDT BizDSL service will not support or guarantee service for any LAN configurations.

The DSL high-speed modem is designed to plug into a Network Interface Card (NIC). If you want to have your Subic Telecom DSL service connection accessible by all computers on your internal network, it is recommended that you obtain a second NIC card for one computer and have it act as a gateway server and route all high speed traffic through that machine. The Subic Telecom DSL service will not support or guarantee service for any LAN configurations.

No. An EthIR Beam receives infrared frames from an infrared device and delivers these to the EthIR Switch. The EthIR Switch then translates these infrared frames to Ethernet frames (and vice-versa) forwarding and receiving frames to and from an Ethernet network. An Ethernet hub cannot translate infrared frames. That is the purpose of the EthIR Switch.

The light does not come on when the card reader is plugged into the computer. It will only come on when a memory card is inserted into the reader.

Good question. According to the USB spec, software is required to connect not only to first tier devices, but also to any plugged into USB hubs. It appears that there is a bug in the Kodak Mounter and USB connection software causing it to fail unless the camera is "device #0", connected directly to the computer.