All summerhouses need a substantial base. The base should be solid, square, flat and level to ensure the stability of your summerhouse. Paving slabs or concrete are ideal. A solid concrete base is more permanent and normally more expensive but it provides an excellent base especially for a larger summerhouse. Paving slabs are more practical and cost effective, especially for a smaller summerhouse at the far end of the garden.

All sheds and summerhouses need a substantial base. The base should be solid, square, flat and level to ensure the stability of your building. Paving slabs or concrete are ideal. A solid concrete base is more permanent and normally more expensive but it provides an excellent base especially for a larger building. Paving slabs are more practical and cost effective, especially for a smaller shed or summerhouse at the far end of the garden.

All sheds need a substantial base. The base should be solid, square, flat and level to ensure the stability of your shed. Paving slabs or concrete are ideal. A solid concrete base is more permanent and normally more expensive but it provides an excellent base especially for a larger shed. Paving slabs are more practical and cost effective, especially for a smaller shed at the far end of the garden.

All greenhouses need a substantial base. The base should be solid, square, flat and level to ensure the stability of your greenhouse. Greenhouse bases can be laid on any hard flat surface including well compacted soil, paving slabs or concrete. However, a greenhouse without a base requires a brick or concrete plinth built to precisely the right size.

All playhouses need a substantial base. The base should be solid, square, flat and level to ensure the stability of your playhouse. Paving slabs or concrete are ideal. A solid concrete base is more permanent and normally more expensive but it provides an excellent base especially for a larger playhouse. Paving slabs are more practical and cost effective, especially for a smaller base at the far end of the garden.

All garages need a substantial base. The base should be solid, square, flat and level to ensure the stability of your garage. A garage base should be higher than the surrounding ground to ensure adequate drainage and to allow for hinged doors to open. Concrete is the preferred material for garage bases. The base for a concrete garage should always be at least 150mm or 6" wider and longer than the external size of the garage.

Most Summer summerhouses are suitable for DIY assembly. Assembly is a straightforward and satisfying project for any DIY enthusiast. Even large summerhouses can be installed with only basic tools, such as a hammer, a screwdriver, a power drill, a spirit level, an adjustable spanner, a knife, a stepladder and safety goggles. Particular care is required when handling glass and good quality gloves should be worn at all times.

All log cabins need a substantial base. The base should be solid, square, flat and level to ensure the stability of your log cabin. Paving slabs or concrete are ideal. A solid concrete base is more permanent and normally more expensive but it provides an excellent base especially for a larger log cabin. Paving slabs are more practical and cost effective, especially for a smaller log cabin at the far end of the garden.

All greenhouses need a substantial base. The base should be solid, square, flat and level to ensure the stability of your greenhouse. Greenhouse bases can be laid on any hard flat surface including well compacted soil but paving slabs or concrete is best.

All garages need a substantial base. The base should be solid, square, flat and level to ensure the stability of your garage. A garage base should be higher than the surrounding ground to ensure adequate drainage and to allow for hinged doors to open. Concrete is the preferred material for garage bases. The base for a Compton garage should always be at least 150mm or 6" wider and longer than the external size of the garage.

All greenhouses need a substantial base. The base should be solid, square, flat and level to ensure the stability of your greenhouse. Installation and baselaying are easier if you order your greenhouse complete with the Eden base plinth. The base plinth can be laid on any hard flat surface including well compacted soil although paving slabs or concrete are best.

All garden offices and garden rooms need a substantial base. The base should be solid, square, flat and level to ensure the stability of your building. Paving slabs or concrete are ideal. A solid concrete base is more permanent and normally more expensive but it provides an excellent base especially for a larger home office. Paving slabs are more practical and cost effective, especially for a smaller base at the far end of the garden.

All greenhouses need a substantial base. The base should be solid, square, flat and level to ensure the stability of your greenhouse. Greenhouse bases can be laid on any hard flat surface including well compacted soil but paving slabs or concrete is best.

Eco Solutions' products - yes! Because of the round and intricate detail of cane furniture, we recommend you use a stainless steel or plastic scouring pad to remove the Eco Solutions' products. A scraper may scratch the surface. Wipe clean with a damp cloth. We have just moved house and the rear brickwork on the house has been painted - can I use Eco Solutions' products Yes, apply a good layer and clean off with a bucket of water and plastic brush - or even quicker - a pressure washer.

Alton greenhouses and summerhouses are suitable for DIY assembly. Assembly is a straightforward and satisfying project for any DIY enthusiast. Even large Alton greenhouses and summerhouses can be installed with only basic tools, such as a hammer, a screwdriver, a power drill, a spirit level, an adjustable spanner, a knife, a stepladder and safety goggles. Particular care is required when handling glass and good quality gloves should be worn at all times.

The composition of the base course is outlined in our specifications as a 3/4 inch minus sandy gravel compacted to 95% modified proctor. The base should allow enough void space for water to percolate and grass roots to grow. If you intend on using a material that will seal tight once compacted (such as limestone) you must add a 30% mixture of sand to create the required void space.

Yes, our mattresses will compliment all types of base units, Slatted, Solid, Sprung Edge. They will feel good on any Bedstead or Divan base.

No problem - PG is definitely suitable for those as well. The chalk (clay?) in those type humidifiers should be "cleaned" once every year or two though... Just soak them overnight in a big pan of water, dry them out, then re-charge with PG solution. Given proper care, that type of element will out-live us all! One word of caution with all clay type elements. Always use distilled water to re-fill them. The trace salts in tap water will clog them eventually...

If you know your prescription, then try: Am I Suitable? for a quick check. The only way to know for sure, and to find the best treatment for you, is to come and see us for a FREE consultation. We have vision correction solutions for long-sight, short-sight, astigmatism, presbyopia (the age related need for reading glasses) and those with strong prescriptions.

Ideally your summerhouse should have a clear space at least 18" wide on all sides, if possible. This ensures easy access for both installation and future maintenance. In reality this is often not practical and at many sites it is not needed. A reduced clearance is often possible on one or two sides. If the space around your summerhouse is restricted remember to allow for any roof overhang. You should also cut back or remove any nearby shrubs and trees. Remember to allow for future growth.

Unless your wooden summerhouse is made from cedar or pressure treated timber it will require regular treatment. The external timber should be treated with a good quality wood stain every year. This will prolong the life of your summerhouse. All major wood stain manufacturers offer suitable products in a choice of colours, available from good hardware shops.

All Summer summerhouses can be easily insulated. Inexpensive polystyrene or fibreglass insulation can be easily fitted between the framing members. The insulation is retained by cross battens which also support the lining boards. Wood effect veneered wallboard is a popular lining but plywood and tongued and grooved cladding are also suitable.

Although providing an electricity supply to a summerhouse is normally a straightforward task, for safety reasons we recommend that you consult an approved electrician first. Since January 1st 2005 all electrical work must be completed in accordance with IEE wiring regulations and BS 7671. Notifiable work must be either notified directly to the local building control department or completed by an operator who is approved under the Part P Electrical Competent Person Scheme.

Type of router depends upon the network, for data purposes you can choose various well known vendor’s Routers available in the market,

You can send your Artwork in any format - Raster Formats such as .jpg, .tif, .gif, .bmp, pcx , dxf , .emf , etc. or Vector Formats such as .cdr, .ai, .eps, .wmf, .ect, etc. while sending Vector formats, Please don’t forget to convert the active fonts to curves, outlines, or paths otherwise we may not be able to read the same font that you have sent.

Once the use of the flooring has been determined by our staff various options will be offered for selections to be made from.

Your dentist will use x-rays and models of your teeth to decide which type of brace is most suitable for you.