If you are using a Creative Labs AWE 43 or 64 sound card, the audio playback quality will be poor if full-duplex mode is enabled. This is a condition caused by the Creative Labs Driver. The audio is recorded in 16-bit, but will only play back in 8-bit as long as the full-duplex mode is enabled. Once you make a recording, choose Options | Audio | Advanced and uncheck the "Enable Simultaneous Record/Playback" item.

Answer: You must get the latest drivers for your sound card. These generally are available from the web site for the manufacturer of your drive. Answer: For safety reasons, DVD X Maker requires that the DVD Video Path end in "\DVD-Video\". The files in this directory are deleted and rebuilt when you build and burn a DVD. DVD X Maker will not automatically erase the files in that directory unless the proper naming convention is used.

You must get the latest drivers for your sound card. These should be available from the manufacturer's website. return to top DVD X Point has to have a valid Default Content Folder to work properly. Uninstall DVD X Point, then reinstall. return to top

Loose cables or cables that are not grounded properly can cause static. Check the connections to make sure all cables are connected correctly. Also, try adjusting the input volume from the media player you are using or from the sound control panel in your system tray.

MixVibes is compatible with Microsoft Windows Media Audio 9. Old Version are not compatible and can cause a crash. Then Install the last Windows Media codec at Microsoft. You can also install windows media player

You can have up to 4 independent mixes into 6 pairs of headphones. You can also record in the control room in front of the main speakers if you like..(most guitar, bass, and keyboard overdubs are done with the artist in the control room and their speaker cabinets in an isolation booth).

If you get no sound when trying to play mp3s using Morpheus, you might need to update Windows Media Player. Get it Here (http://www.microsoft.com).

If your video plays with sound only, and no picture, you will need the proper Codec. To determine what Codec your video file requires see the following answers.

Check your sound card and speaker connections, make sure you have the most current driver for your sound card.

Check that the volume control is up on your computer. Our programs automatically start with sound on (a mute button is provided), so if you still don't have sound send an e-mail to help@mypathtv.com.

kX Audio Driver fully supports GSIF specification. There are currently two GSIF driver sub-sets: VxD and WDM-based. Since kX Audio Driver is a WDM driver, it supports WDM GSIF only. Under certain circumstances, this causes certain compatibility problems with GSIF-aware applications (such as GigaStudio and GigaSampler), especially under Windows 9x / Millenium. Please upgrade your Giga application (and install any patches available from Tascam).

The phone’s memory may have become corrupt and can be fixed by rebooting the phone. If this does not work, delete pairing information and pair again.

What is the scratching sound I hear when I drive off in my Touareg? 4. Known Issues and Troubleshooting

It has been suggested that the quiet scratching sound that is heard when you drive off in the Touareg is part of the security system. Specifically, it may be the Immobilizer system reading the transponder in the key.

It's a good question with many answers! FIRSTLY - the TriAxis can be set up with many different sounds - make sure that the sounds within the unit are what you like - a simple statement, but unless you know how to change them with memory dumps, then it's twiddle time on the front controls. Unfortunately that is probably NOT the way to do things - the sounds you hear will be dependent on the other items in your rack including the amp used.

In Windows Media Player, make sure codec installer is turned on. From the menu bar select Tools/Options/Player/Auto Upgrade/Enable automatic codec download Your connection speed is too slow. If you are connecting using a 28.8 modem, your connection speed is too slow to view Stocking Videos. If you are accessing video from overseas, you may be experiencing slow response or packet loss in the delivery of video.

Obviously, you should record using a good quality microphone in a quiet setting. In addition, you should place the microphone a little below your mouth rather than right in front, otherwise the microphone will record the pressure of your breath. You should see View → Java Console now. (Reproduce the error, then get the Java Console. You must reproduce the error because it was lost when you closed the browser.)

Providing you've got a clean source signal, analog recordings generally sound fine, giving nearly inaudible differences from digital ones. Note however that many computer soundcards have noisy analog output stages, so when recording from a computer, digital transfers are recommended (one exception is the USB based Xitel MD-Port AN1 which runs outside of the PC chassis and produces good quiet analog output).

The usual problem is that there are too many music players installed, and your computer don't know which music player to use. You may have erratic behavior if you have Quicktime installed. Problems include: Only playing 1-2 seconds of each song before quitting or garbled sound when playing. This should solve the problem, if not you may have another unrelated configuration problem with your computer. Most everyone uses Windows media player.

Open Windows Media Player. Click Tools -> Options. Select DVD tab and press Advanced, and ensure the AC3 and DTS decoder settings are set to decode to speakers and not to SPDIF.

This is due to a settings mismatch in the audio recording preferences. To correct this open the "Sound Capture" preferences and then select "Custom" from the Compression drop-down menu. Now select "Options" on the panel that appears. Make sure that your output sample rate matches your input sample rate.

You will notice that you hear static over your BlackBerry speaker when your device is connecting to your network (indicated by arrows in the upper right hand corner of your screen). The static is reduced by a strong network connection, or by listening to the QuickPlayer through earbuds. The browser you use to visit getQuickPlayer.com can sometimes affect our ability to recognize your BlackBerry model. If you encounter this problem, visit getQuickPlayer.

If you're hearing static, first check the battery life on your phone to see if it needs to be charged; there may be enough power to attempt a call, but not enough power to locate the signal. Next check your bars of signal strength and ensure your antenna is fully extended; you could be in a poor reception area or have an interference such as weather conditions, building structures or other electronic devices.

Please adjust the preference of your Real Player for the most reliable video by opening Real Player and going to Tools-->Preferences-->Playback settings. Set buffer play to 45 seconds. Then click on Hardware in the prefernces menu and Video Card Compatiblity at the bottom should be set to most reliable or Use Optimized Video Display Unchecked (depending on your version of the Real Player). Currently, the program is set up to send both greetings. However, if you are not having a party at Chuck E.

Yes. The sound masking sound is audible if you listen for it. However, sound masking has been designed to be as inconspicuous as possible. The sound masking system is specially tuned to reduce any variation in the sound volume across the office space, so that the masking is uniformed. Also, it does not contain any variations or patterns which can be consciously recognized. The system uses pink noise which is very soothing and pleasant. It sounds similar to lightly blowing air.

The ear is the organ used to detect sound in humans and some animals. The ear consists of three major sections: the outer ear, middle ear, and inner ear. The external section of the ear consists of a cartilage flap called the pinna. The pinna’s size and shape are used as a transformer to match the impedance of the sound wave entering the ear canal by gradually funneling the wave’s sound energy into the ear.

Check to make sure that your speakers and/or headphones are plugged in and the volume is turned up. For PC users make sure that your mute box is unchecked. You can adjust the volume by dragging the volume slide bar. For Mac users, you can adjust the volume by hitting the volume keys on the keyboard.

Internet Explorer privacy setting = Medium (click Start - Control Panel - Internet Options - Privacy tab)