The finish is a industrial grade semi-gloss; high heat rated enamel black paint designed to last for many years. Most barbeque grills today are mass produced. Coastal Professional Barbeque Grills are all handmade and 100% welded construction. Coastal Professional Barbeque Grills are built heavier than most of the grills being built in the United States today. We build one grill in four different sizes; 20" X 24" - 2' X 3' - 2' X 4' - 3' X 4 1/2' Pull-Behind Pig Cooker.

We use only stainless steel for our burners and we build them ourselves. The burner has a lifetime warranty. If there is a problem with the burner we will replace it.

Gauge on the Body and 16 Gauge on Lid. The materials used are heavier than most of the other barbeque grill manufacturers. The Coastal Professional Barbeque Grill is all handmade using all barstock steel tubing for the frame; no angle iron is used on any part of the grill. All welded barstock construction gives the barbeque grill impeccable strength and will last for many years.

Yes, the Coastal Professional Barbeque Grill is an indirect heat grill. On the inside of the grill there is a 1/8" thick steel baffle. This design serves three purposes: 1) A very consistent overall grill temperature so you do not have to worry about crossover grilling because the entire grill surface is very consistent. 2) You will have limited flare-ups because of the deflector shield. 3) A convective grill that cooks from the top as well as the bottom.

The 20" X 24", 2 X 3 and 2 X 4 Grills temperature range is from 275 degrees to 500 degrees. The 3' X 4 1/2' Pull Behind Pig Cookers temperature range is from 180 degrees to 500 degrees.

On the bottom of the body of the grill, where the steel is creased, there is a slight pitch from left to right and the grease and drippings constantly drain as they fall off of the top deflector shield and drain into a spout on the bottom right-hand side of the grill where there is a hook for a grease pail. There is no waiting for an accumulation of grease for it to drain.

Absolutely, to clean the grill it is just a matter of removing both deflector shields inside the grill and you have plenty of room to work with. Just a matter of taking a paint scraper and working grease and drippings to one side and taking a regular spray hose and forcing it out the two air intakes on the left side of the grill. There are no messy lava rock or ceramics to deal with.

Yes, we use a heavy-duty piezo ignition system and the switch for it is located next to the temperature control. In case igniter fails to light, there is a 1/2" opening on the right side of the body of the grill where the burner can be lit manually.

Absolutely, we personally deliver to North Carolina, Virginia, and South Carolina. For all other areas, we palletize/crate our barbeque grills and freight them to all areas of the country using Old Dominion Transportation Company. If you have a question about freight costs please give us a call or click on the contact us link located at the bottom of every page.

Actually Coastal Professional Barbeque Grills are both. You have the convenience of LP Gas but you also have the option to use a Charcoal Tray. Once started the Coastal Professional Barbeque Grill will achieve 425 Degrees in 4 to 41/2 minutes so you have a gas grill for convenience and when time allows you can use charcoal to grill your favorites. We also can set up all of our barbeque grills to be used with Natural Gas. We also build 100 % all Charcoal Grills as well.

To give you an example, the 2' X 3' Grill is our most popular model for the homeowner. You can grill 12 Whole Chickens at one time or a 50 LB. Whole Hog (less head and feet); the 2' X 4' Grill grills 16 Whole Chickens or a 70 LB. Whole Hog (less head and feet); the 3 X 4 1/2' Pig Cooker will grill up to 26 Whole Chickens or a 150 LB. Whole Hog with room to spare; the 20" X 24" Grill is a standard small size grill where space is a premium.

Yes. At least two portable charcoal grills are available on the property, as well as stone grills. Other outdoor fires are generally not allowed. You may only cook on the grills provided or bring a camp stove or propane grill. Ask the caretaker when you arrive if the current forest fire danger permits outdoor fires — as sparks from a grill can cause a disastrous forest fire. Also remember to be patient. At an elevation of 8,600 feet there simply isn't as much oxygen.

Some Weber grills have a little bit of black flecking in the colored finish of their porcelain lid for shading purposes.

All homes have a propane gas barbeque grill for your use. Some grills are located on top decks, others at ground level. Local ordinance prohibits the use of grills under the house so please move it to a location free of cover.

The paint finishes used on our panels are the highest quality. We start out with a high-tensile steel. We then coat it with a Galvalume 55% zinc, 45% aluminum coating. They are next pre-treated with primer, and then finally coated with a high quality baked-on enamel paint system.

Don't worry, it's not paint. The inside surfaces of our grill lids are not painted, they are coated with baked-on porcelain enamel which cannot peel. What you are noticing is a deposit of grease and smoke that collects during normal use. During use, the grease and smoke vapors slowly oxidize into carbon and collect on the inside of your lid. This deposit will eventually peel, and looks very similar to paint. The peeling normally starts in the center of the lid and spreads outward.

You have invested some money in your grill and now you need to protect that investment. One of the first ways that you can accomplish this is to buy a bbq grill cover. This is one item that you will defiantly want purchase but, if you are not sure... Many people would wonder why there are folks who prefer to buy unfinished kitchen cabinets. It just seems to be an awful lot of inconvenience to buy a product that needs you to work on it before you can actually use it.

The 20' X 24', 2' X 3 and 2' X 4 Grills have adjustable slide vent ports located on the rear section of the lid. The Pig Cooker has two smokestacks on top of the lid with adjustable china-hats on each smokestack.

A high temperature paint specifically formulated for use on stoves is used. They have a matt finish, we offer as standard 6 choices of colour as shown on the "stove" page. The stove will emit an unpleasant odour during the first couple of firings, this is the paint "curing off" - this is quite normal.

The cases are made of a durable plastic Polypropylene. Acrylic paint is used for the gloss finished cases.

Your Moon Valley furniture is treated with our own special wood varnish or a water-based stain, depending on your ... Read More

TCM guitars were originally finished in nitrocellulose lacquer; Terry now uses a proprietary finish he calls "Nitrothane".

The aluminum extrusion is powder coated. We have a variety of colors to match your existing door color.

We do offer "certain styles of pre-primed balusters" but we do not do any painting or staining of any kind.

A primer coat is first applied using a 'high throw' electrophoretic anodic paint process. This allows the water based primer coat to penetrate all the way up behind the fins increasing protection to an area which is vulnerable to rusting with conventional methods. A top coat of polyester powder paint is then added to create an attractive, durable and easy to clean finish.

Yes, however you must take proper care and precaution by clearing all flammable material from around it and you must stay with it until it is completely extinguished or turned off.