What chassis can I use with the controller?
Frequently Asked Questions - Support - National InstrumentsYou can use any of the National Instruments PXI chassis except the PXI-1020 and the PXI-1025 (with built-in display screens).
Related QuestionsQ. Do I have to use an imbedded controller in my chassis ?
Pickering Interfaces Test and Measurement PXI LXI PCI VXI IE...A. No. Most applications use an external controller. External controllers are generally more cost effective and have higher performance than imbedded controllers since they can take advantage of the high volumes of product manufactured for the business and consumer markets. Imbedded controllers offer a more compact and self contained solution. To use an external controller the chassis needs to be fitted with a interface module, such as MXI3.
Related QuestionsWhat do I use for Chassis?
VHT Spray Paints from Speco Thomas Frequently Asked Question...VHT Epoxy All Weather Paint is ideal for all under body applications including suspension. It is the same hard and durable finish that is applied to appliances. It restores the surface to a long lasting, hard and durable finish. It is used more and more on Show Car and restoration projects. The SP-652 Satin Black is the most popular color for this project.
Related QuestionsWhat controller would you use?
Grassroots Electric VehiclesIn general; I put as many batteries in as possible. The Zilla controllers are the best dc controllers on the market and they come in 3 voltages 156v, 300v and 348v at 1000 or 2000 amps. As distance is related to weight of batteries, golf cart batteries give lots of weight at 65lbs each. You get the most for the money but it is hard to get the voltage high when you need 20 of them, just to get 120 volts.
Related QuestionsWhere are the chassis' made?
FIA Frequently Asked QuestionsAll chassis tubing components are cut right at the factory. Most of the sheet metal components are sublet to a CNC punch shop where tolerances are less than +/- .010". All separate components are MIG or TIG welded right in our own jigs at the factory. When you visit us, look at the high quality of the welds. Our certified welders are the best! Suspension components are done the same way. Arms are cut and jig welded right here. The GT arms are TIG welded.
Related QuestionsWhy did we use a rectangular-tube chassis?
Frequently Asked QuestionsWhat's so special about the E.R.A. 427? The E.R.A. 427 was designed from the beginning to look exactly like the original car, but without many of the original Shelby's shortcomings. We have strengthened the chassis, improved the body mounting and material, and thoroughly refined the suspension to make a better street car. Just how close to the original look is it? We've duplicated the outside shape, interior details and even the look of the engine compartment.
Related QuestionsWhich shocks to use with aftermarket chassis?
SYSTEM BLOODCLOD - Radio Controlled Monster Trucks (RCMTs)For all the aftermarket clod chassis and the Sassy USA-1 chassis, any 4" shocks will bolt on just fine. The favorites here are the Losi 1.2 and the Associated 1.32 shocks. For those on a budget, the Duratrax 4" competition shocks or the Kyosho long sport shocks work great for a much lesser price. Note however, that many people (including myself) have problems with the Duratrax units leaking - so I would personally recommend the Kyoshos for budget truckers.
Related QuestionsWhich shocks can I use with the stock chassis?
SYSTEM BLOODCLOD - Radio Controlled Monster Trucks (RCMTs)For the Clod or Juggernaut, you can purchase the direct Tamiya replacements. Look for 50304 C.V.A Long Shock Unit Set. These are oil-filled units that come in pairs. You will need 4 sets to replace the 8 friction units on the stock Clod. Alternatively, you could use the more common 4" shocks but you will need to drill a hole below the stock mounting holes to make up for the difference in length (4" shocks are shorter than the stock Clod units).
Related QuestionsHow long does it take to adapt your drive chassis to a new controller?
Primatics - FAQThe time to adapt the MDC drive chassis to a new controller will vary depending on the backlog, however most adaptations take no more than four weeks. The customer must supply us with a sample controller and documentation.
Related QuestionsGTO3.COM FAQNoble designed tubular steel space frame with bonded and riveted alloy panels and integrated roll over protection for the passenger cell.Related Questions
DeLorean - PJ Grady Europe DeLorean - useful infoThe chassis frame is made of mild steel, covered with an epoxy resin. The frames were initially made from stainless steel too, but were too expensive - so were later developed from mild steel with the epoxy coating. The frame is one of the most common parts of a DeLorean to rust or corrode, and is perhaps the most important thing to check when buying a car. PJ Grady Europe have fixed many frames that had badly corroded. Details of this can be found within the 'Repairs' section of this website.Related Questions
Blokart land yachts sailer FAQ: sand sailors blocart sailers...BloKart land yachtss are available in either high strength steel or in stainless steel (stainless steel are more expensive). The high strength steel BloKart chassis are initially electro galvanized then powder coated in order to help combat the effects of corrosion. It is not as rigid as high strength steel and fatigues easily. This means that when it's new its great, however after constant use it becomes more flexible and won't spring back to it's original position.Related Questions
blokart.com :: fun, fast, compact!All blokarts come in either high strength steel or stainless steel. The high strength steel chassis is zinc plated then powder coated to help combat the effects of corrosion. The stainless steel chassis is made of 100% stainless steel and is virtually corrosion proof.Related Questions
Blokart FAQsThe high strength steel chassis is zinc shielded (galvanized) then powder coated to help combat the effects of corrosion. The stainless steel chassis is made of 100% stainless steel and is virtually corrosion proof. Aluminium oxidizes when used in a marine environment. It is not as rigid as high strength steel and fatigues easily. The chassis would be made of larger diameter tubes making it less aesthetic and far less portable.Related Questions
How do I set up patches for use with a wind controller?
WIND CONTROLLER FAQ (UPDATED)Very few synths, past or present, work well right out of the box with a wind controller. Pretty much the only synths made to work with a wind controller as they come from the factory are the VL70-m/PLG-VL cards, WT11, the Akai EWI4000s, and the Akai EWI series modules. All other synths require that you either program them to respond to the wind controller or buy some commercial wind controller sounds for them.
Related QuestionsCan I use a Sensorex ORP electrode with any meter or controller ?
ORP Electrode FAQ : Support - FAQs :: SensorexYes. The output signal of all ORP electrodes are compatible with virtually all meters and controllers. When ordering, please specify the type of connector, the length of cable, and the installation configuration (if installing in a tank, pipe tee, or insertion.). You can even read ORP output with most DVM's (digital volt meter).
Related QuestionsCan I use the controller for a freshwater aquarium?
MCU Research - Lighthouse Aquarium ControllerAbsolutely. The built-in PH controller is excellent for use on planted tanks that utilize a CO2 solenoid.
Related QuestionsCan I use more than one PMC motion controller in a computer?
FAQ about PMC Motion ControllersYes. Each controller is given a unique ID that permits application programs to address multiple controllers. ID nubers are assigned automatically at boot-up via Plug & Play for PCI-bus controllers, and via the controller configuration applet for legacy ISA-bus controllers.
Related QuestionsWhat is Modbus and what software do you have to use with this controller?
Watlow - F4 Process Controller FAQsA Modbus is a highly reliable protocol developed by AEG Schneider (Modicon) which uses packets of information. Many third-party software packages are available which use the Modbus (RTU) protocol. Comm6 is a software package from Watlow and available free of charge on the Watlow web site at http://www.watlow.com/literature/prodtechinfo. Yes, the slidewire must be in the resistance range of 0 to 1200 ohms. The remote set point must configured and wired according to the user's manual.
Related QuestionsWhat speed controller should I use?
X400 Tuning - Frequently Asked QuestionsThis depends on motor choice, the majority of people will be fine with a 25A ESC. However, if you intend to run a 3S lipo and go for maximum motor performance (AON 2815-3500 perhaps) then a 35A ESC would be preferable as current is likely to be at or above 25A. Also make sure that your ESC can run a 3S lipo and the required 4 servos current draw. The Align 25A and CC 25A both state that only three servos are supported in a 3S configuration......
Related QuestionsCan I use more than one Wireless Controller?
TechnoHome.ca - home automation home control by pc phone rem...You need at least one Wireless Controller in order to operate and configure your home control system. Add more controllers as needed for your convenience. For example: Use one controller in a central part of the house and one in the master bedroom.
Related QuestionsI already have a boost controller, can I still use this?
ECUTEK -Yes, if you wish your EcuTeK tuner can tune and adjust your ECU to work with your separate Boost controller.
Related QuestionsHow do I use a controller under NT?
The Control Center FAQIn order for you to get decent support using NT 4 use must use service pack 3 or higher. Service pack for messed things up and I not to sure about any of the later service packs. The last version of Direct X for NT was 3. Nt supported Joy 1 X axis and Y axis fine. However, you could go about setting up Joy 2 X axis and Y axis but these settings would get saved in the wrong location in the registry. X saved as Y and vice versa.
Related QuestionsCan I use my 4020i with a SCSI controller other than the Advansys controller it ships with?
HP SureStore 4020i FAQYes you can. I have successfully used the 4020i with an Adaptec 1542CF controller. The only change that I had to make was in the SCSISelect utility. Upon getting into SCSI select, you will need to select Device Configuration. Then go to the ID that the 4020i is on (default = 2). Where it says YES for FAST SCSI, change it to say NO. If you attempt to burn CDs when this is set to YES, you will run into mysterious Buffer Underrun Errors. I don't know why this causes buffer underruns, but it do...
Related QuestionsWhat type of paint do I use on my buggy chassis & parts?
The EDGE Products - Frequently Asked QuestionsWe have had hundreds of buggies powder coated at The Edge & if it's applied correctly you will not find a more durable finish. I have seen buggies painted in two pack & although the finish was excellent the durability did not match powder coat. If a chassis is sandblasted, pre-heated & powder coated it will have a very tough, chip resistant, (within reason) good finish.
Related QuestionsWhy don't you use a Front Controller?
FAQ on the Radicore Development InfrastructureBefore I answer this, what exactly is a Front Controller? Is his book Patterns of Enterprise Application Architecture Martin Fowler offers this definition: A Front Controller handles all calls for a Web site, and is usually structured in two parts: a Web handler and a command hierarchy.
Related QuestionsCan I use a 935 controller with any detector and still obtain realtime collection and analysis?
BNC | FAQ | Model 935 SAM | Frequently Asked Questions (FAQs...No. The Model 935 is designed for use with a particular type of NaI detector that incorporates a highly efficient, proprietary high voltage bias supply built into the base of the detector. The Model 935 control unit provides 12 V dc power to the detector base along with a 0 - 1 Volt reference that controls the bias voltage for detector operation. The signal does, however, come back from the detector to the controller preamplifier/amplifier much like other systems.
Related QuestionsWhat are your favorite HARDWARE sound modules to use with a wind controller?
WIND CONTROLLER FAQ (UPDATED)a wind controller sound designer who has worked with the majority of synthesizers on the market, I'll give you my favorite wind controller synths... Yamaha VL70-m with the Patchman TURBO VL upgrade - The VL70-m is probably the most popular wind controller module. It is a superb module when upgraded with the Patchman Music TURBO VL upgrade chip (the factory sounds are only so-so).
Related Questions