In The Groove uses USB storage devices as memory cards to keep track of user stats, options, and more. For a more thorough explanation, please see the USB / Edits section of this FAQ.

Available Edits will show up at the bottom of the difficulty list on the Music Selection screen. Edit steps appear in white text, and show the name of the edit in place of a difficulty name. On the Music Selection screen, switch to your Edit by pressing Down, Down on the dance pad several times.

Q: Which program do I use for word processing, spreadcheat calculations, image processing, burning, scanning, surfing, chatting...

First boot KNOPPIX with the memory stick inserted. Got to the KNOPPIX menu, Configuration, Save Configuration. When asked, choose /dev/sda1. When booting type knoppix myconf=scan home=scan at the boot prompt. This is an issue with the Dell BIOS. Simply pull out the power cord from your computer for a few seconds, and your computer should start again. You can also try passing "apm=off" or "apm=real-mode-poweroff" to the kernel during startup.

Insert the card into the card slot as shown. (The EVOLT E-500 supports xD-Picture Card media as well as CompactFlash? media.) Push the card gently straight in until it clicks.

Answer: It has been report that this problem occurs when you format the card using your PC, rather than your N-Gage. So as a rule of thumb always format the memory cards with you N-Gage only. A possible solution is to format the card in a card reader connected to the computer, and formatting the card using the FAT 16 file system should work. This should remove any residual corrupted files, then you can format it again in the N-gage in order to get the correct file structure.

They are also known as "jump drives". You can buy them from the UNBC store or if you prefer you can get them from any reputable store. Please ensure when purchasing a USB Flash they say on the package "No drivers required for Windows XP systems". If your USB requires drivers installed it will not work in the student labs.

In theory yes. Any Stick supporting USB 1.1 However Eurotherm have tested 6000 series using Sandisk products, as they are a reliable major supplier. Others, which may not be as robust to EMC problems, are used at the end users risk. USB 2.0 devices are generally backwards compatible to USB 1.1 which the 6000 series supports.

Is your USB Memory device formatted to be bootable? A drive partition must be marked active in order for it to be bootable. Typically this is achieved with a disk formatting program, or the DOS command "fdisk." What Operating System are you running? In short, the USB Flash Memory can be bootable. It must meet the same conditions as other bootable disks, i.e., floppies, CDs and hard disks. First, your system BIOS must support booting from a USB device.

The CODi USB Flash Memory/Disk is today's latest solution for data storage replacing floppies, CDs and hard disks. They will store virtually anything that can be saved on a computer. The CODi USB Flash Memory/Disk is available in 32MB, 64MB, 128MB, 256MB, 512MB, 1GB and 2GB versions.

Licensed music must be synchronized to your phone or its external memory card using the appropriate USB cable and software in order to be playable on your phone. Licensed music transferred to the phone directly via a memory card will not play on your phone. Unprotected music may be transferred using Windows Explorer if it is in WMA format. V CAST Music phones with Version 01.02.000 or higher software such as the Chocolate by LG can also accept unprotected MP3 files.

Orient the card as shown below. For CompactFlash? media, hold the memory card so that the contact area is on the card's left, pointing into the card slot, and the CF Mark is in the upper left corner of the card. For xD-Picture Card? media, hold the memory card so that the gold contact area is facing the back of the camera and the notch is facing down.

A memory card is an external card that can be inserted into your PDA. Information is stored on this device, which when inserted into the PDA allows for additional memory.

Other considerations: multimedia capability; user convenience features (personal preference); power saving features; warranties; monitor display quality; number of USB ports; number of free PCI slots; number of FireWire ports; availability of DVI display port (connector for a flat-panel display with digital input). You also may want to check user ratings in consumer and computer publications for such things as reliability and quality of technical support.

A portable USB memory device is the latest in storing files from your local hard drive to a portable memory device such as a floppy, zip or cd. To transfer/copy files from your student network folder to your USB memory stick, go to a student workstation and log in with your MyCourses/eCommons username and case-sensitive password. Double click on My Computer and look for the Removable Drive that will signify your USB Memory device. Do not pull out memory stick when task is complete.

Yes firmware can be upgraded from any removable media or over the network via FTP transfer, Client or Server.

USB Flash Memory TransMemoryTM are formatted at the factory. If you need to format one again, use your computer.

Fill out the form and send it to the Technical Support Center with the device to be repaired and your warranty card.

This message will be displayed after you press the Save to USB Memory button, and the system has determined that there is not enough memory available in the USB flash drive to hold the images that it is trying to copy from internal memory to the flash drive. To correct this problem, remove the USB flash drive from the front panel and insert it in a Windows computer. Then use the MediCapture Image Transfer Wizard to transfer any images on the flash drive to your computer.

None of this has been asked by journalists and Sony hasn't mentioned it so it's fairly sure to say "no" to this one. Making it impossible makes sure that people buy more Memory Sticks.

Yamaha do not make and sell the USB flash memory devices, but these are widely available from computer and electronics stores and from many manufacturers. When choosing a memory device remember that; M7CL is USB1.1, so both USB1.1 and USB2.0 will work. Storage capacity must not exceed 2Gig. The disc can be formatted to FAT12 FAT16 or FAT32 but must not be partitioned. You can format a new disc in M7CL, but remember formatting an old disc erases all its memories.

Important Note: Your humble authors got tired of writing dry formal technical prose in the rest of this document, and succumbed to the temptation to try to be funny in parts of this appendix. Sarcasm abounds here. Please do not take any of this personally! The humor-impaired should interpret my comments not as attacks on them, but as an attempt to make fun of myself for being impatient with you, my devoted and valued, if sometimes demanding, users.

Consult your user/owner's manual for details about the original memory configuration and capacity. If you've misplaced the manual, you may be able to contact the retailer where you bought the PC from. If you have a hand-me-down PC or inherited a pre-owned PC, you probably may not have the user manual or know any detail of the original memory configuration or the memory configuration may have been changed.

If you cannot get the program to install on the phone, please make sure to closely follow the installation instructions. If the program is not behaving as you would expect, please first make sure you're following the Photo Contacts PRO Best Practices.

The program must be installed in internal memory on the phone. This ensures higher reliability, faster loading and consistent availability. When I try to run the application from my phone I get this error: " 'PhotoContactsPro_SM_v504_full.exe' Is not a valid Win32 application." Photo Contacts PRO contains a desktop installer. It is installed by running the installation process on your desktop PC (not on the phone) with the phone connected to Activesync.