Why can I hear clicks in VSamp's output?
VSamp FAQYour loop is not set correctly. Samples with loops must not have any jumps between the end of the loop and the beginning. Check that this is not the case with a sample editor. If you are holding down the keyboard for the entire length of the sample and you hear a click at the end of the sample before you have released the key then the sample has a DC offset ie. the waveform does not tail off to zero. In this case edit the sample and fade out the last few samples.
Related QuestionsWhy can I only hear effects from certain output ports of my multi-output sound card?
Cakewalk - Frequently Asked QuestionsThere is a workaround for this issue. If you don't have audio tracks assigned to the same output ports as your effects loop, you must have a "dummy" track in Cakewalk assigned to the same port as the effects loop instead. That dummy track must contain an audio event, even if it's a recording of silence. (Back to top)
Related QuestionsThere's something wrong with the audio quality. I hear buzzing and clicks. How can I fix this?
Slim Devices : Product Info : FAQI'm seeing messages in the SlimServer's console or debug window, but the server seems to be running fine. I can't seem to get the SlimServer software to run under RedHat Linux 9.0. There's an error about "Time::HiRes" when it starts up.
Related QuestionsWhen I change programs, I hear clicks and pops occasionally. Is my speaker broken?
Alesis FAQIt is not unusual to hear slight noises when changing programs. This is due to the discontinuous nature of digital audio, and is most likely to occur when the programs are very different. Another application you are using may have configured the serial port of the PC improperly. In particular, the Flow Control must be set to "None." Exit any other application that may be misappropriating the serial port.
Related QuestionsHow do we hear?
Hearing is a series of events in which the ear converts sound waves into electrical signals and causes nerve impulses to be sent to the brain where they are interpreted as sound. The ear has three main parts: the outer, middle, and inner ear. Sound waves enter through the outer ear and reach the middle ear, where they cause the ear drum to vibrate. The vibrations are transmitted through three tiny bones in the middle ear called the ossicles.
Related QuestionsHow much clicks can I get?
FAQ - INCREASER.COM YOUR TRAFFIC INCREASERThe clicks are not restricted. You can get as much clicks as visitors on the Increaser.com banners, buttons or link on your Site. You also have the opportunity to buy additional ClickThrus with your bonuspoints! Each day you can visit 5 new Sites in our Bonus club. Each visit will provide you 100 bonuspoints (5x100p=500p).
Related QuestionsThunder Arena - Round 37 - faqClicks are something a player has that helps that player get to the top. It also is used to fight certain mobs. Having clicks brings your power up as well, so their is many attributes to having clicks.Related Questions
XposureThe number of clicks in is how many people have clicked in to your site from other peoples' rotation links. Clicks out is how many have clicked the rotation link on your site.Related Questions
Why doesn't my sequencer recognise VSamp?
VSamp FAQMake sure VSamp is running. Sequencers will only recognise VSamp as a MIDI destination when VSamp is running.
Related QuestionsHow do I use VSamp with Logic?
VSamp FAQIn the Arrange or Environment window, click on a track or instrument so that you can see the parameter box for that instrument. If VSamp is running you will see VSamp appear in the pull down menu that appears when you click on the Port in the parameter box. Make sure you assign the MIDI channel for the track to the same as a currently loaded instrument in VSamp (channel 1 for the demo)
Related QuestionsHow do I use VSamp with Finale?
VSamp FAQAssign VSamp to 16 Finale Output Instruments by selecting VSamp in one of the popup menus and click OK Assign a staff to the VSamp instruments with Finale's instruments window as you would with any other MIDI device.
Related QuestionsHow do I use VSamp VST with Cubase?
VSamp FAQSelect VSamp VST from the popup menu No VST Instr. on the Instruments window. This will create a new VSamp VST instrument. Use the faders to set the number of voices that this Instrument will play. A lower value will put less strain on your computer's processor. Select also the headroom. Leave this at 0dB unless the sound starts to distort. You can create as many of these Instruments as you like provided you have enough processing power. They will be called VSamp VST (1), VSamp VST (2) ....
Related QuestionsHow do I use VSamp AU with GarageBand?
VSamp FAQUse the faders to set the number of voices that this Instrument will play. A lower value will put less strain on your computer's processor. Select also the headroom. Leave this at 0dB unless the sound starts to distort.
Related QuestionsWhy when I use the live input do I hear an echo in the output ?
ANWIDA Soft - frequently asked questionsIn many sound cards a "monitor" channel is available. This output allows to listen the signal that you are feeding into the sound card. If your sound card has this channel, turn it off, otherwise, once the processor will be activated, you will listen to the dry (un-processed) signal also and you will perceive a delay like effect. We tested recent Sound Blaster cards and everything worked fine.
Related QuestionsMy player is connected using digital output but I can't hear sound from SACD, why?
Sigmatek XM-400 Pro FAQAnd when you want to hear SACD, then switch your amplifier to "6CH IN" to make it works! And enjoy SACD sound ;) If your amplifier is not 5.1, but simply stereo, then you can connect the 2 outputs "Mixed Stéréo" (red and white RCA plugs) to your amplifier on a stereo input. In this case you will have to also modify the setup as follows: Setup/General configuration/SACD Priority/2 Channel.
Related QuestionsWhich links generate the most clicks and sales?
Celiac.com Store, Gluten-Free Foods for Celiac Disease and S...By far the graphical banner links to our home page generate the most clicks and sales. The larger the banner the more clicks and sales it will generate. You can experiment with the various banners that we offer to see which one works best for your site.
Related QuestionsHow do I trap double-clicks on a TRichEdit?
Yet Another Code Site - FAQsRemy Lebeau (Gambit) offered the following solution in a C++ Builder forum. Simply publish the unpublished OnDblClick event like so: class PACKAGE TMyRichEdit : public TRichEdit { public: __fastcall TMyRichEdit(TComponent* Owner); __published: __property OnDblClick; }; __fastcall TMyRichEdit::TMyRichEdit(TComponent* Owner) : TRichEdit(Owner) { } void __fastcall TForm1::MyRichEditDblClick(TObject* Sender) { ShowMessage("double-clicked"); }
Related QuestionsI sometimes hear little clicks, pops, or dropouts while listening with my web browser. What's wrong?
Frequently asked QuestionsFortunately, there's nothing wrong with the sound files. It's a common problem that occurs when you play an mp3 file in a web browser before the file has finished loading into the browser. If you find it annoying, you can either wait for the file to load completely or download the sound file to your hard disk and play it using some other mp3 player program (such as iTunes).
Related QuestionsOccasionally I hear frequent clicks when using my 900MHz cordless phone. How come?
Frequently Asked QuestionsYou may be experiencing interference with another device that uses the 900MHz frequency range. One possibility is a Metricom Ricochet modem that is being used in a nearby office. We recommend using a higher frequency cordless phone.
Related QuestionsWhat are the output options?
Web4Print frequently asked questions (FAQ): client-server sy...Depending on your needs, the final print-ready documents can be output as PostScript, PDF, TIFF or EPS files. They can be used for desktop printing, printing by a commercial printer, inclusion in other documents or for electronic distribution.
Related QuestionsHow do I use VSamp AU with Digital Performer?
VSamp FAQSetup->Configure Audio System->Configure Hardware Driver opens a window showing using CoreAudio with Built-In Audio Controller Project->Add Track->Instrument Track->VSamp AU creates a new mixer channel and opens the VSamp AU window.
Related QuestionsWhy don't I hear more about this ?
FAQThe product is just becoming commercially available recently. It has been used for years by some well respected M.D.'s but it has been difficult to obtain due to costs and manufacturing capabilities. This has changed and is now available to the public.
Related QuestionsHow well will I hear on my deaf side?
TransEar® for Single-Sided Deafness - Frequently Asked Quest...Every user's experience is different, but many report that they are able to locate the direction sounds are coming from, and almost all can put a telephone to the dead ear and hear the dial tone. In quiet conditions, most can carry on a phone conversation using the aided ear, and whispers can usually be heard from the TransEar side.
Related QuestionsStressPest - Frequently Asked QuestionsContact the webmaster with questions or comments about this site. Content Copyright © 2005, 2006, 2007 StressPest, LLC. Last modified: 07/25/07.Related Questions
JournalStar.com - Lincoln, Nebraska - Blog - JournalStar.com...The past few days, a MySpace survey has been circulating among my friends. Typical questions include "What was your best month?" and "What will you remember 2006 for?" I filled it out, and I realized that the year didn't pass as quickly as I thought it had. January seems like a long time ago. Things that weren't in my life at the beginning of the year are now part of my daily routine, and things that I thought I couldn't live without I don't even think about anymore.Related Questions
