Will the wireless network replace the wired network?
Frequently Asked QuestionsThe wireless network will not be a replacement for the wired network. Its purpose is to provide university students,faculty and staff access to the Internet via mobile devices such as laptops and PDAs.
Related QuestionsC&CNot in the foreseeable future. Wired speeds are up to 1Gbit per second, wireless are currently at 54Mbits per second. Work is ongoing to improve the speed of both wired and wireless. However, it is foreseeable that wireless technology will improve to the point that all personal computing requirements will be adequately addressed. This requires some basic underlying technology improvements that place significant speed improvements several years away from the market.Related Questions
Information Technology Services: Wireless FAQNo. Wireless is intended for use with mobile devices. The wired network is still much more reliable, faster, and more secure than wireless. We will continue to wire offices and other dedicated work areas. For example, staff members may use a laptop connected to the wired network through a docking station on their desks. But when going to a meeting in a wireless-covered conference room, she can use the wireless network and VPN to access files, view Web pages, etc.Related Questions
Is the wireless network just as fast as the wired network?
Wireless FAQquot;Just as fast" is a vague term. It could be that for simple operations, like browsing web pages, that the wireless network will be just as fast as the wired network, but there is much more bandwidth available to the wired network than the wireless one.
Related QuestionsShould I use wired or wireless network ?
DrayTek FAQ - GeneralThere is no easy answer for this, and both have their advantages and disadvantages. Consider also that all the DrayTek models with WLAN built-in also have the 4-port switch - so you can use both wired and wireless connections in the same LAN. Not always convenient to run the cables through the house or office - particularly for rented premises. Note however that the older slower 802.11B speed of 11Mbps is still faster than the 8Mbps max. speed for ADSL technology, let alone the 1.
Related QuestionsCan I do everything on wireless that I can do on the wired network?
C&CIt is recommended that when possible, high traffic users stay on the wired network. The wireless network uses different technologies from the wired network and therefore has considerably lower bandwidth capabilities. Because of this, any high volume traffic applications, such streaming video will not only be slow for the client using that application, but all other clients connecting to the same AP will be similarly affected. Servers are not permitted on the WLAN.
Related QuestionsHow can I connect a computer on a wired network to one on a wireless network?
Classroom Presenter FAQsThis runs into the problem that the current networking (Multicast) is not well supported across different networks - the wireless to wired scenario is particularly problematic.
Related QuestionsCan I do everything with a wireless connection that I could do with a wired network connection?
WCSU - Wireless at WestConn Frequent Asked QuestionsThe WestConn wireless network is part of a DMZ network. Wireless users will only be able to access items on the University network similar to when they connect to the internet from home. Some services that are known to have security issues have been blocked. Please note that wireless service is not intended to replace the University wired network.
Related QuestionsCan I use wired and wireless equipment on the same network?
Home NetworkingAbsolutely. In fact, a combination of home networking products is often the best way to meet your home's needs. Check out the How to Get Started Home Networking section for some examples of mixed home networks.
Related QuestionsWill PrintJobs work on our wireless/wired network?
Elm Software - PrintJobs - FAQYes. PrintJobs can be installed on multiple computers and link to a single database over your network. Each computer will need to have PrintJobs installed and a purchased license. We will assist you in setting up your PrintJobs network.
Related QuestionsWhy is a wired solution better than a wireless network?
tecStreamWireless was designed for data. Wireless can be a useful part of a network (for checking email, Web browsing, etc.), but it cannot handle the demands of today’s homeowner for high-quality audio and video distribution. homeowners invest in large-screen TVs, digital cable, digital cameras, TiVos, and media PCs they want to maximize what they can do with videos, music, photographs, and computer files.
Related QuestionsCan I use the TexMesh network with my existing wired or wireless network?
FAQYes. You will need one of our wireless range extenders which will service as the Internet source which you plug into the WAN port of your router. This arrangement is very similar to connecting to a cable or DSL modem, you just connect to TexMesh range extender instead.
Related QuestionsCan wireless networks be used to replace wired networks?
UH Wireless Network by Information Technology Services, Univ...It usually not a good idea to replace an existing wired network with a wireless network. Wireless networks are currently based on 11Mbps and is a shared access medium. Also as you move further away from your access point, the wireless speed will drop automatically to compensate for the weaker signal. With planned upgrades to the Manoa network you will be able to get 100Mbps, depending on your building wire infrastructure.
Related QuestionsBCC Wireless NetworkIt is not to replace an existing wired network with a wireless network. Wireless networks are currently based on 11Mbps or 54Mbps and is a shared access medium. As you move away from the installed access point, the wireless access speed will drop automatically to compensate for the weaker signal. BCC wired network allows access for 100Mbps, depending on your building wire infrastructure.Related Questions
Will the Wireless LAN replace my current "wired" connection?
Networking & Telecommunications | Idaho State UniversityWireless connectivity gives mobility and flexibility, however, it is not as robust or secure as a wired connection. Wireless technology is evolving but is a "shared" technology. What that means is, everyone using the Wireless connection in your building is competing for the same resource. The more users, the slower the response. It is also less secure and susceptible to interference.
Related QuestionsWhy is my wireless connection disrupted more frequently than my wired connection?
TNS: FAQsWireless access points operate within the 2.4GHz frequency range and are prone to interference from microwave ovens, other unknown access points in the area, some cordless phones and many other environmental factors that may be passing between you and the access point at any given time. Though the wireless protocol was designed to be robust, it is still radio frequency, and it can be interrupted by various pieces of equipment and/or structures.
Related QuestionsShould I get a wired system or a wireless system?
Dependable Alarm Systems - Frequently Asked QuestionsMany factors affect this choice. The major factor is the construction and decoration of the premises. Can the location be wired and how much labor will be involved in wiring for the alarm? Will wireless devices be able to communicate to the alarm panel? Plaster walls with metal lathe in them can block the wireless signals. Large mirrors, foil wallpaper, metal lockers and other radio systems nearby might prevent a wireless system from working properly.
Related QuestionsWhy wireless? Why not wired?
Banyan Data, LLCA wired network and a wireless network function similarly. We have provided below a chart that shows the main differences in the two networks. Installation is non-intrusive. The installation can be completed with minimal mess and will not disturb your guests. Guests wirelessly "connect" to the network and type in their password. Their password is valid for the length of their stay. Guests can connect only where there is a network jack. Usually, they need to be at the desk in a guest room.
Related QuestionsWill I be able to access the wired/wireless network on campus?
Laptop FAQStudents must first be registered before accessing Ross educational resources. Additionally, both campuses require students to schedule to have personal notebook computer systems configured prior to accessing ROSS local LAN resources. The scheduling process begins after registration and configurations begin the first day of classes.
Related QuestionsWill iDo Wedding and Event Professional Edition work on our wireless/wired network?
Elm Software - iDo Wedding and Event Professional Edition - ...Yes. iDo Wedding and Event Professional Edition can be installed on multiple computers and link to a single database over your network. Each computer will need to have iDo installed and a purchased license. We will assist you in setting up your iDo network.
Related QuestionsQ9. What is the highest bitrate the player supports over wireless and wired network?
Welcome to SnaZio* (An Extension to Snazzi* Product Line)Under perfect conditions, the player supports up to 15Mbps. However, it is highly dependant to your wired/wireless environment.
Related QuestionsIs it true that a wireless connection disrupted more often than a wired network connection?
WCSU - Wireless at WestConn Frequent Asked QuestionsIt depends. Many factors may affect wireless connections (walls, desks, large metal objects, etc.). However, there are other devices that operate in the same 2.4GHz frequency range that can disrupt wireless connections. The largest offenders are 2.4GHz wireless telephones (but not cell phones), microwave ovens, etc.
Related QuestionsWhat's the difference between the wired and wireless models? Can the wireless model be wired?
Slim Devices : Product Info : FAQThe wireless model includes both 802.11g (wireless) and 10/100 ethernet (wired) connections. The wired-only model has only the ethernet interface. Aside from that, they are the same.
Related QuestionsWhat is the difference between a hard-wired and wireless system?
Frequently Asked Questions (FAQ)The main difference is the type of technology and the type of installation. When it comes to the system's capabilities and effectiveness, there is no difference.
Related QuestionsDo students need both a wired and wireless network interface adapter?
Wireless - Frequently Asked Questions (FAQ)Students who are are or will soon be purchasing a laptop computer should look into laptops that are bundled together with a modem, a 10/100BaseT Ethernet (wired) adapter and a wireless adapter. This provides the most flexibility in accessing an Internet connection. The wireless network will only allow access via a wireless adapter. A wireless IEEE 802.11b compliant adapter is best for campus-wide connectivity in classrooms, lounges, and outdoors.
Related QuestionsHow do I secure my wireless network?
Grande Communications - FAQs ; How-TosLimit the number of DHCP addresses to the number of wireless access points that you will be using. Optionally, set static IP addresses, set to non-standard network blocks. Consider using VPN, SSL, Firewalls, RADIUS, Kerberos or other access control, or end-to-end encryption. Most of these can be integrated into your 802.11b appliance.
Related QuestionsWill a firewall protect my wireless network?
Firewall: FAQA firewall will help protect a computer on a wireless network, but will not restrict access to the network itself. You should configure your wireless network to use a network key using either Wi-Fi Protected Access (WPA) or wired equivalent privacy (WEP). For more information, see How to keep others from hijacking your home wireless network or consult the manual for your wireless networking devices.
Related QuestionsHow many people can be on the wireless network at once?
TNS: FAQsThe campus wireless network can handle hundreds of users logged in at any one time, but the more active users, the slower the network becomes. On average, one access point can handle approximately 30 users without a noticeable degradation in performance.
Related QuestionsWhat is the difference between a wired and a wireless camera?
Stun Guns Pepper Sprays Voice Changers Security ProductsWired cameras have a video cable that runs from the camera to your recording or viewing device such as a DVR, VCR or monitor. Wireless cameras have a built-in transmitter that sends the video signal to a receiver. The receiver connects to your recording or viewing device.
Related QuestionsWired or wireless, which should I choose?
Do-It-Yourself-Alarms...Tips on planning your alarm installa...This is basically a question of cost and ease of installation. Wireless systems are easier to install, but they cost quite a bit more. Each zone will run from $35 and up. A wired system, by comparison, will usually cost only about $50 to $100 per 8 or 16-zone panel or expander, $2.50 an up for the sensor, and the wire to connect them. But you will spend a lot more time running the wire from the sensor to the panel. (To help out with this I give some tips on wiring a house.
Related Questions