You can inform JacORB which Ethernet adapter to use by specifing it in the jacorb.properties file (it could also be passed in on the command line). Just set the OAIAddr property to the IP address that you want JacORB to use. For example, on my Windows98 machine which has a DSL modem, JacORB was using the adapter Ethernet address 5.0.0.4 instead of the true public IP address. I modified OAIAddr property and everything worked fine.

It is an expansion card placed in a computer to support the ethernet network protocol across digital communications lines.

Answer: The Apple LAN Utility version 1.0b4e1 can obtain the built-in Ethernet address in the Power Macintosh 7200 series computer. While this utility is not supported by Apple, it is available at Apple Software Updates sites. With System 7.5.3 and the included Open Transport networking software 1.1, you can also determine the Ethernet address in either the TCP/IP or the AppleTalk control panels. The following steps apply to either control panel.

The wireless MAC address of the 85Mbps HomePlug Wireless G Ethernet Adapter is same as the LAN MAC address.

If you are purchasing a new PC, you should order it with an ethernet adapter pre-installed. If you already own a computer and it does not have an ethernet adapter pre-installed, we suggest purchasing a 3Com 10/100 Etherlink adapter. Laptop users can purchase a comparable PCMCIA card. Ethernet adapters are available for purchase through the IMU Bookstore or from local vendors. The ResNet system was designed for the use of a 3-meter patch cable (also referred to as a dropcord).

Click the Start button (bottom left corner of screen) and choose run. In the box that appears type " cmd " and press Enter. At the command prompt, type " ipconfig /all " and press Enter. The number we need is labeled Physical Address and should look something like 00-06-5B-1C-90-8D

JacORB is an open source Java ORB that is most often used with TAO. To learn more visit the home page or OCI's JacORB Support Page.

Java uses a properties file called "orb.properties" to determine which ORB to use. If the Java runtime doesn't find an orb.properties file, it uses the JDK's ORB. JacORB's orb.properties file is located in the top-level JacORB directory. Copy JacORB's orb.properties file into the Java JDK's ${java.home}/lib directory to enable JacORB.

Unfortunately, you cannot. The USB on the empeg is a slave port. You need a USB master to drive the adaptor and the empeg doesn't have one and won't have one. The empeg folks have said that: of the people need a slave device so they can hook it up to their home PC for downloads (and a master can't talk to a master without special additional hardware), and USB master chips usually come attached to a PCI bus - which the empeg doesn't have. Contributed by Clarke

The i.LON 10 Ethernet Adapter is designed to "keep up" with the channel for unacknowledged uplink messages. This means that the i.LON 10 Ethernet Adapter can pass up to 180 - 200 unacknowledged messages per second uplink from the FTT channel to the LNS or OpenLDV PC. Acknowledged service is slower. However, the performance is asymmetric. Downlink unacknowledged messages are limited to approximately 21 - 22 per second.

The carrier delivered my package to the wrong address. What do I do? Contact us immediately! We will work with the carrier to correct the situation as quickly as possible.

FAQ #4f. Well, ok not free, how about selling me some stuff factory direct at a good price and I will tell all my friends how much I love your gear. FAQ #4g. Then sell it to me for a cheap price and you can write off the rest of it on your taxes as a donation to a charitable cause because I am sick and half blind and deaf too and doing a project for charity.

Your computer uses an Ethernet adaptor or card to communicate on the network. Every Ethernet adaptor is assigned a numeric ID by the manufacturer that is similar to a serial number. The ID is referred to by various names, including adaptor address, hardware address, physical address, MAC address and Ethernet address. The ID consists of 6 pairs of digits, usually separated by a character. The digits consist of the numerals 0 through 9 and the letters A through F (upper or lowercase).

On Windows NT the address of the Ethernet card can be obtained with the command ipconfig/all. The address of the Ethernet card is listed by Windows as Physical Address. sbin/ifconfig eth0 | grep eth0 | awk '{print $NF}' | awk -F : '{for (i=1; i<=NF; i++) printf("%s", $i); printf("\n")}'

Taking advantage of the voice communication for free. The device connects to a telephone set and any existing infrastructure such as Internet Leased Line, xDSL, Cable Modem or other TCP/IP Networks. Local, long-distance and international call charges will be eliminated.

You can find the network adapter's MAC address (apart from checking the print on the device) by software. In Windows 2000 and XP: Open up a shell from Start → Programs → Accessories → Command Prompt. Enter the command ipconfig /all. On the line labeled Physical address is the MAC address. Make sure you're not looking at the data of the PPP Adapter, the name of the adapter used in the student village network is something else.

Turn the Telephone Adapter over, and look for the number below the 3rd barcode labeled â??MACâ??. You will find a 12-character string of numbers and letters. Look on the box that your Telephone Adapter arrived in. The 12-character MAC address will be printed on the side of the box and marked â??MACâ??. Use the Telephone Adapter "IVR" menu. To do this, plug the Telephone Adapter into the power supply, and plug a telephone handset into the â??phoneâ?? jack on the Adapter.

Pull down the "File" menu to "Get Info". The Hardware Address should be listed there. There is a drop down menu in WinIPCfg of your adapters. If not already selected, pull it down to your Ethernet card (and/or Wireless card). Your Hardware Address should be listed as the "Physical Address" for your Ethernet adapter.

To register your network card under the HKU Portal, you need to reveal the network card address of your PC: To register your Wireless network card, look under the Ethernet adapter Wireless Network Connection section and the Physical Address is its Ethernet address. To register your wired network card (connection using a cable), look under the Ethernet adapter Local Area Connection section and the Physical Address is its Ethernet address.

This is a longstanding bug with the G1 and Pro 90 IS, and a relatively new bug with the G2. With the G2, it was introduced with a new camera firmware (G2 1.0.0.0 worked, 1.1.0.0 does not). We haven't fixed this bug yet since none of the active gphoto2 developers owned one of these cameras until recently (i.e. updated his G2's firmware). There is some more info regarding this at http://krixor.xy.org/fredrik/gp/canon-g1-ac-problem/. Good luck.

The 85Mbps HomePlug Wireless G Ethernet Adapter technology exploits the transmission line more effective because of sophisticated and better adapted modulation methods, without changing basic mechanisms of the signal transmission and the media access. Because of this, the backward compatibility to HomePlug 1.0 is ensured.

You always need two adapters for the initial installation. If you want to connect your network to the Internet, you need at least one adapter to be connected to an ADSL/Cable modem (only one participant of the network can use the Internet) or to an ADSL modem router (all participants of the network can use the Internet at the same time). The 85Mbps HomePlug Wireless G Ethernet Adapter has a standard power plug for connection to a power outlet. There are three main kinds of power plugs:

connections are theoretically possible. But in practice, no more than ten devices should transfer data at the same time.

Yes, you can. You can use the Configuration Utility to set a common network password within the group or network.

Yes. The wireless antenna of the 85Mbps HomePlug Wireless G Ethernet Adapter is a 3dbi detachable antenna and can be changed.

The i.LON 10 Ethernet Adapter is a single function device, it acts as a Remote Network Interface (RNI) and nothing more. It was designed to provide complete LonWorks connectivity at the lowest possible price. The i.LON 100 Internet Server can also act as a remote network interface (RNI), but has additional capabilities, including built-in applications for scheduling, data logging, and alarm processing. The i.

The i.LON 10 Ethernet Adapter connects to the PC via 10 BaseT Ethernet. The SLTA-10 connects to the PC via RS-232. Both the i.LON 10 Ethernet Adapter and SLTA-10 can connect to the PC via modem. The i.LON 10 Ethernet Adapter uses TCP/IP when directly connected and PPP when connected via modem which allows the use of intervening Internet Service Providers (ISPs). The SLTA-10 uses a proprietary serial link protocol which is not supported by ISPs. Performance is roughly equal.

Only for configuration purposes. The i.LON 10 Ethernet Adapter cannot provide network variable values in a web page. The i.LON 100 can access network variables through web pages.

HTTP access (used to set configuration) may be limited or disabled. If disabled, you must have physical access to the i.LON 10 Ethernet Adapter to change its operating parameters.