Search 5,000,000+ questions and answers.

Frequently Asked Questions

What type of batteries do I use for the base unit?

Welcome to Mobile PC NoteTaker's worldwide online distributo...
You should use 2 AAA batteries (1.5 Volt each) for the base unit, and 3 SR41 batteries for the electronic pen.
Related Questions

What type of batteries does the unit use?

Frequently Asked Questions
The systems were designed for standard 12V batteries. The battery base accept a size Group 24. Standard Automotive or Marine batteries will work. It is recommended that a special Gel-Cell or AGM battery intended for deep draw be used. Marine batteries also work well. The reason for selecting these batteries is that they will last long per use, and will take the charge and discharge cycles better, thus lasting much longer than a standard automotive battery.
Related Questions

The camera and transmitter are built in to an incredibly small housing (0.625"x1.25"x2.1") about 1/4 the size of a pager. Both share the same power source of a single 9 volt ! battery. The 9 volt battery snap (included) plugs into the housing.
Related Questions

What type batteries do Dr Mom Otoscopes use, and will re-chargable's also work?

Otoscopes
Dr Mom Otoscopes come standard with 2 readily available and easily replaceable AAA batteries. Rechargeable AAA batteries can be purchased separately and also work well with our otoscopes.
Related Questions

What type of batteries do you use? How long will they last?

FAQ
They are usually lead-acid deep-cycle cells quite different from automotive batteries. Lifetime is dependent on plate design but typically 6-15 years. For more information see our energy storage page.
Related Questions

FAQ
The Pclix uses 2 AAA batteries, Alkaline is best but others will work as well. With a fresh pair of Alkaline batteries installed the Pclix LT100 will trigger a camera once every two seconds for about a month solid. With a longer interval the battery life would be extended. As with any battery extreme cold temperatures will reduce it's life. If you require a longer operating time than a month please select the power adaptor option when ordering.
Related Questions

What type of batteries do the sensors use?

Securepro Wireless Home/Business Security Alarm System
The sensors consume close to zero power. They only need 2 X AAA alkaline batteries and will alert through the control panel when almost flat. (Batteries last 2-3 years)
Related Questions

What type of batteries can the PMD660 use?

D&M Pro - PMD660 Portable Solid State Recorder
The PMD660 can use AA alkaline batteries, or Rechargeable NiMH batteries. Batteries can not be charged in the PMD660.
Related Questions

Grassroots Electric Vehicles
You will have many questions concerning batteries so in an attempt to answer most of them here we offer these comparisons. We offer these three 12KW 120 volt battery packs as hypothetical examples for the same 3,500lb vehicle with the same motor and controller. volt deep cycle golf cart batteries with water levels to be maintained; this pack might weigh about 1300lbs and cost about $1,800.
Related Questions

Can I use rechargeable batteries with the charging unit?

PowerPack ? a multi-purpose emergency charger kit - F.A.Q
Yes. Our product is the first solution for extra cell phone power that allows you to use rechargeable batteries for extra savings.
Related Questions

What type of batteries do the devices use, and how long will they last?

Leisuretec - Night Vision Frequently Asked Questions
Most devices use commonly available batteries, such as 1,5V AA type, 9Volt square type, or 3V Lithium type. Generally the device will last up to 15-20 hours of continuous use if the Infrared Illuminator is in OFF position. If used with the illuminator, expect 30-40% less operating time.
Related Questions

What type of batteries does the Optio43WR use?

Pentax Canada - Optio43WR
Note: We do not recommend using rechargeable CR-V3 batteries with our digital cameras due to issues with the output voltage. Specifically, avoid rechargeable CR-V3 batteries with these designations: RCR-V3, CR-VX, BP-11.
Related Questions

What type of batteries does my device use?

Frequently Asked Questions
Most handheld devices including PDAs and IPods use either Li-on or Li- Po batteries. Other devices such as handheld barcode scanners, power tools, cell phones and portable game consoles also use Li-ion and Li-Po batteries but may also use Ni-Mh or Ni-Cd batteries as well. All these types of batteries are considered to be â??secondary batteriesâ?? in the world battery market. (read more about the world battery market below)
Related Questions

What type of batteries does the OptioX use?

Pentax Canada - OptioX
The OptioX kit includes a rechargeable lithium-ion battery (D-LI8) and charge stand ( USB cradle, D-CR24)
Related Questions

What type of batteries does the transmitter use?

Frequently Asked Questions About the MiniMed Paradigm® REAL-...
The MiniLink REAL-Time Transmitter has a self-contained battery, which cannot be changed, but can be recharged using the battery-powered MiniLink charger.
Related Questions

What type of batteries does the FoxBat use, and how long will the batteries last?

Frequently Asked Questions...
FoxBat products use two AA batteries. Generally the device will last for 15-20 hours of continuous use if the infrared illuminator is in the OFF position. If used with the illuminator, expect 30-40% less operating time.
Related Questions

What type of oil base and water base do you use?

MyHardwoodFloors - A premier hardwood installation company w...
My Hardwood Floors uses top quality oil base and water base finishes. We recommend oil base for older floors to restore their original richness and beauty, whereas water base on old floors tends to make them look dull. Other factors such as timing of the project (water base dries faster) and the style of finish (i.e., semi-gloss, high gloss, satin) should also be taken into consideration when choosing a finish.
Related Questions

Why does the base unit for mass, the kilogram, have a numeric prefix?

FAQ: Frequently Asked Questions about the metric system
When the metric system was originally developed, the standard unit for mass was the mass of a liter of water at the ice point - basically the same as today's kilogram, although at the time it was called the "grave." After the French Revolution, the new government decided that this unit was inconveniently large, since many mass measurements involved much smaller masses.
Related Questions

What type of base course does the product require?

Frequently Asked Questions
The composition of the base course is outlined in our specifications as a 3/4 inch minus sandy gravel compacted to 95% modified proctor. The base should allow enough void space for water to percolate and grass roots to grow. If you intend on using a material that will seal tight once compacted (such as limestone) you must add a 30% mixture of sand to create the required void space.
Related Questions

Q: What numbers should I use for Base Attack, Base Walk, and so forth?

D-Mod Author's FAQ Revision 1.3
A: A group of 10 sequences is reserved for each "base" anything, and it's always a multiple of 10. If you want to add a creature that walks around with sequences 601, 603, 607, and 609, then the BASE WALK should be set to 600. If you want to add a creature that attacks with sequences 531, 533, 537, and 539, then the BASE ATTACK would be 530. Basically, the "base" gives a quick number to use by simply adding the direction. If facing right (direction 6) then 530 + 6 = 536.
Related Questions

What type of fluid do I use in the hydraulic power unit, and where do I add it?

Frequently Asked Questions
Use any type of Automatic Transmission Fluid (ATF). Don't worry about the exact brand or type, it will all work, and can even be mixed. To add fluid, remove the lexan cover on the HPU, locate the "filler stack" in the left front corner of the reservoir. There is a round plug sealing the filler stack. Remove the plug and add fluid to the full line on the reservoir. Note: add fluid only with the trim tabs fully retracted (up).
Related Questions

What type of radio do you use for Unit-to-Unit communication?

Frequently Asked Questions
IST uses an ISM 900Mhz band spread spectrum frequency hoping two-way transceiver. This radio is FCC License free, and the software provides a good deal of signal reliability and security.
Related Questions

Can I recharge batteries while they're in the unit?

Robert Lipe's Magellan (330, SporTrak, Meridian) GPS FAQ
No. This adds cost, weight, and liability issues to the product. You must place batteries in an external charger.
Related Questions

Can a Sensor trigger more than one Receiver/Speaker (Base Unit)?

Voice Alert System-6: Frequently Asked Questions
Yes. A Sensor can be programmed to trigger recorded messages from one or more Receiver/Speakers (Base Units). For example, suppose you were a Retailer and placed 1 Sensor by the front door. When the Sensor is triggered, you could use one Receiver/Speaker to play a message such as "Welcome to my store. Let us know how we can help you." The same Sensor triggers a second Receiver/Speaker in the back office, notifying staff someone is in the store with the message "A customer is out front.
Related Questions

Can I keep the base unit in my house/garage?

Hunter Deer Cam
You can keep the base unit anywhere you can receive the signal from the camera unit - We have customers that have the base unit installed inside their garages and they work just fine.
Related Questions

What is the base unit of the measure?

E&B DATA - Invest Review
The base unit is the facility (establishment) and not the legal corporate entity (company). The same approach is used by Statistics Canada. Only facilities whose main activity is within one of the high technology industries are included, regardless of its parent’s activity.
Related Questions

Where do you suggest we locate the base unit?

Securepro Wireless Home/Business Security Alarm System
Base unit can be wall or bench mounted, most wall-mount installations require you to run cables from the roof down through the wall cavity. Bench mounted just requires you to connect to phone or power. (Study? Loungeroom?) Our experience suggests 95% of customers will have no objection to the latter, making installation a breeze.
Related Questions

Got A Question? Ask Our Community!


More Questions >>

© Copyright 2007-2008 QueryCAT
About • Webmasters • Contact