All newly poured concrete should be cured a minimum of 28 to 30 days prior to applying any Karnak solvent base product such as Karnak #83AF Fibered Dampproofing, #86AF Fibered Trowel Mastic, #229AF AR-Elastomeric Waterproofing or #W-1 One-Kote. Newly poured concrete and C.M.U.

Yes! Primers are recommended to prepare porous or slightly dusty surfaces prior to the application of coatings or mastics.

We contacted a leather shop which suggested avoiding dry cleaners, even those who specialize in leather, as chemicals which are used in the cleaning process can significantly change the look & feel leather. For spot cleaning an area of gasoline spilled on leather, they advise the following: With a VERY SOFT brush (a child's toothbrush, something very, very soft), LIGHTLY spot clean the damaged area. DO NOT SCRUB -- be very very gentle.

Contact the Customer Service Desk at 492-5522, they will page someone out to the building as soon as possible.

All of our driveway sealers will wash off with soap and water when the sealer is still wet. However, if it has dried there are a couple of ways to clean it up. First, any high performance cleaner that contains citrus does a good job. Second, a product called, "Solvall" seems to work well on many different surfaces. They can be reached at 1-800-724-7667 or www.emulso.com. They can UPS product to you.

Scoop or push as much of the spilled toner as you can with the edge of a sheet of paper onto another sheet of paper. Fold the paper up and place it in the trash. When all but a dusting of toner is left, take a clean rag to wipe the toner up.

Down can either be washed or dry cleaned. The important thing is that it be very clean when the process is over. If the filaments are clogged with suspended dirt, or dirty dry cleaning solvent, they will not reloft properly. return to questions

Answer: As part of a spill clean-up protocol, ATCC recommends that each laboratory have their own procedures set in place for handling potentially hazardous agents. This type of standard operating procedure should consider: 1) The agent(s) being handled; 2) The quantity of cultures being manipulated; and, 3) The size and scope of the laboratory itself.

Discover why stains started appearing on roofs in the last 20 years. Homeowners discover stains on their roof and believe the roof should be replaced, but roofs can be cleaned! Some of the many products in the range of different products available from Peaceful Mountain are explained in this article to give you a better idea of which of the products that are available could provide you with the best benefits.

No! Do nothing other than to lock your system if you must leave it unattended, and immediately contact the organization's appropriately cleared ISSO.

Treatments may be dusted or lightly vacuumed with an upholstery attachment for everyday maintenance. If heavy cleaning is necessary, please consult a professional drapery cleaner. Castec solar shading fabrics require a minimum of maintenance. Clean fabrics by using any of the following methods:

Some products have removable, washable covers. It is best to hand wash these fabrics to help maintain colors and shape. The inner covers and the Toasty Bears & Friends should be cleaned with a slightly damp cloth. A small amount of mild dish soap applied to the cloth can be used on dirt or stains. A blow drier can be used to dry damp fabrics. **Do not submerge or soak products with buckwheat, flaxseed or herbs.

Start by wiping off all the oil or grease you can reach. Then, for synthetic hydrocarbon, polyglycol, ester, silicone and polyphenyl ether oils and greases, wipe all surfaces with hydrocarbon solvent Nysolv HG (or mineral spirits) and follow with an isopropyl alcohol wipe. For PFPE greases and oils, wipe with Nye Fluorosolvent 504, which is a completely fluorinated, fast-evaporating "ozone-safe" solvent that is an effective cleaning agent for PFPE greases and oils.

Cleaning Burmese teak is very simple. Use a mild solution of soap and water (for heavily soiled teak a mild solution of bleach and water) simply apply to the surface of the product and wipe or scrub off. This will remove the surface dirt and restore the teak to its natural beauty. This is an example of one of our custom-built in-shower mats. Each slat is slightly spaced (1/8" apart) to allow water to drain through and the feet are rubber-coated to keep the mat level and steady.

Answer: Daily Maintenance Do not clean the surface of plate with corrosive detergent; clean ordinary stains with pint dilute, turpentine, alcohol and toothpaste. If the surface is scratched, please grind it with dry or wet 1500# sand paper, then apply meguiar 10# mirror glaze special compound, if it can't recover the gloss, polish the surface chemicals and apply polishing wax. Please put cold water before hot water into the bathtub.

We recommend using a specialty fireplace cleaner on the glass, like Speedy White, that can be purchased from your local Country Flame dealer. Be sure the glass is cool when cleaning. Be careful not to allow any of the cleaner to spray or drip on the gold trim; this will cause discoloration.

There exist many specialized products on the market. The majority works very well. Your Osburn dealer probably carries a full range of cleaning products. Note that there is no miracle product. If your glass has not been cleaned periodically, creosote build-ups and combustion residues will be very hard to remove. Your glass will probably not retrieve its original appearance. Replacing the glass is always an option, but it will be more costly.

We recommend having your down filled product dry cleaned by professionals. Always follow the instructions on the Care Label. If you are asking yourself this question, then you are serious about looking for the absolute best night of rest and comfort! Throughout the world, there are many different qualities of white goose down. The three major geographic locations for goose down are Canada, Europe and China. They all produce similar qualities, but are also very much different.

Using a soft cloth, gently scrub the uppers using mild soap and cold water. Air dry. If you choose to wash nylon and canvas shoes in your washing machine, use cold water on a gentle cycle setting with mild detergent. Do not bleach your footwear or use harsh cleaning agents. Do not machine dry. Do not immerse or soak in water. Do not machine wash or dry leather and suede products. Hand wash them using a soft cloth dampened with mild soap and cold water. Air dry.

We scrub the exhibit islands with a veterinary disinfectant every day. We also vacuum the entire exhibit and scrub any areas where algae builds up.

A product is believed to be clean if it doesn't contain ingredients that are unclean according to the Word of God. The circled U kosher symbol stands for the Orthodox Union; the circled K stands for the Kashrus Laboratories, & the D stands for dairy; when you see the "D" next to a circled K or U it means that the product contains a dairy ingredient. The D is used because some organizations believe that we are not suppose to eat meat and dairy together.

Soap is processed animal fat and can dry out skin. Huggies Baby Wipes contain mild cleansers and are perfectly safe for wiping little hands and faces. Although they contain some synthetic cleansing agents, all Huggies Baby Wipes are still very gentle and should not cause any problems even for babies with sensitive skin.

These products are compatible with most wastewater treatment systems and will not adversely affect the environment. Spills or excess product can be safely poured down the drain or septic system. Check with your local regulatory standards before disposing of any chemical.

Yes, the ingredients in the product fall within the criteria for potential human health and environmental effects and that - based on currently available information, predictive models, and expert judgment - contains only those ingredients that pose the least concern to humans and the environment among chemicals in their class. Additionally, as compared to other methods of remediation, EasyDECON? is resource and energy efficient minimizing the depletion of natural resources.

Product #8000 - Equipment Cleaning Wipe ( 7" x 7") is mostly used on the external housing of computer and other office machines. Product #8008- Static Neutralizing Lint Free Cloth is a dry cloth which removes dust and neutralizes static on contact. The product # 8022 and 8023 - Laser Printer Cleaning Sheet is made of a patented material which safely cleans the paper paths of laser printers.

Most of the parts are water resistant, so it's ok to clean them with soap and water. To avoid scratching the aluminum surfaces use a soft sponge and a cloth. The polyethylene surfaces are hygienic grade, that means they don't accumulate fungus, you may clean them with a green kitchen scour pad. To clean the upholstery use a fabric cleanser. Detailed information on maintenance of your product can be found on the instructions manual. If you lost your copy, no worries.

Once you begin to see calcium scale collect in the bottom of your ESTEAMÆ Hand-Held Travel JiffyÆ Steamer, it is time to use the JiffyÆ Steamer Liquid Cleaner. Please follow these instructions: Pour in 5 ounces (1/2 bottle) of JiffyÆ Steamer Liquid Cleaner. If the JiffyÆ Liquid Cleaner is not used or is not available for shipment in your area, a solution of ? white vinegar (3 ounces) and ? water (3 ounces) may be used as a substitute solution.