ShadQu: Shadow quality, irradiance samples are increased when close to other objects by following this value. The higher, the more samples will be taken near a shadowing object. The default value 0.9 is good enough for most scenes. Prec: Pixel precision. At least one irradiance sample is taken each X pixels of distance. You can imagine a grid of samples (X spaced), that would be the irradiance sample distribution if we had just a plane. A value of 10 is good for high res images (1024x768).

For step by step instructions on how to configure these settings, please visit the ETUDES-NG System Requirements.

For step by step instructions on how to configure your browser settings, please review the ETUDES-NG System Requirements. Help desk staff do not have the authority to reopen assignments, tests or quizzes. Permission to resubmit is at the discretion of your instructor.

VPN allows you to use the same email configuration away that you use on campus. See Install and Configure Eudora.

Configuring a neighbor cache is not a trivial matter. There are a number of decisions you need to make, and other factors to consider. You need to decide if our cache will be a parent, or a sibling, to your cache. If you use a sibling relationship, then your cache requests only those objects that are already in our cache. The sibling relationship requires you to use one of the inter-cache protocols described below.

My machine has a system drive and a disk array. Should I setup the file cache to the system drive or the disk array? You should set the File Cache to use the disk array as it Should the file cache be the same as the file location? The File Cache can be any drive attached to the system, or even a network drive. Ideally use the fastest drive available. I set the File Cache to the disk array, but I do not see any temp files created within the folder.

You can turn caching the optimization analysis data on or off on the 'Cache' tab in the Optimization settings (the File menu > Settings > Optimization tab > Cache). Put the checkmarks near the parameters you wish to be cached: off-the-page factors for your site pages, on-the-page and off-the-page factors for your competitors' pages. By default, all these options are checked.

A Detailed instructions are available in Section 6 of Internet Texoma's How To directory on this site.

Don't move the cache! Responsible cache owners often check on their caches and would be alarmed to discover that it is missing. alternative would be to have a trackable item, which is an item that you can move from cache to cache. An example of this is a candle that has traveled from Australia to Arizona, and a Mr. Potato head that leaps from cache to cache.

You don't. Well, to be more specific, you don't within Melon or ScratchPad. Our applications make use of the default e-mail client configured on your computer to send messages. Actually, they don't even send messages, we just create an e-mail for you to massage and then it's up to you to actually send the message.

Once you have registered with Tata Indicom Broadband, you get an e-mail account. To download mails on your PC, you can configure an e-mail client on your machine. For more details click here Your e-mail account address will be myself@vsnl.net ( in case of prepaid ) and myself@eth.net ( in case of post-paid) , where myself is the User Name you create on registering with Tata Indicom.

You can set your browser so that it doesn't cache secured pages. This will ensure that your secure information is not retained in the memory of your local hard drive when you end your NetBank session and close your browser. This is particularly important if other people access your computer. Please note: Not caching secured pages may impact the performance of NetBank as each page will need to load from the server when accessed.

You have to specify a virtual net as an ip-range ? means a net which is not assigned in the network (e.g 192.168.250.1 ? 192.168.250.253)+ The IP-address which you specify under server-ip, may not be assigned in the virtual pptp-net or in a local net . Also, none of the already assigned ip-addresses from the server, may be assigned .

The only setting that you must configure for the chat server to run is Application("ScriptPath"). This setting must match the virtual directory where you installed the chat server files. For example, if you can get to login.asp in your browser by entering the URL http://www.myserver.com/scripts/chat/login.asp, the corresponding setting must read:: Don't forget to configure this setting. Otherwise the chat won't work. The remaining settings can be left unmodified.

Once you have registered with Tata Indicom Broadband, you get an e-mail account. To use this mail account, you can configure an e-mail client on your machine. Your e-mail account address will be myself@vsnl.net ( in case of prepaid ) and myself@eth.net ( in case of postpaid) , where myself is the User Name you create on registering with Tata Indicom. You can also access your Tata Indicom mail account from anywhere in the world by logging onto webmail.vsnl.com

Via the operserv config <varname> <value> mechanism, using your client. You send a private message to pseudo-user "operserv", consisting of the keyword "config", the name of the variable you want to change and the new value you want to assign to that variable. Please note that not all configuration variables of Opennap NG can be changed this way during runtime. Some require the server to be rehashed, a few ones can only be changed on a server restart.

PREBATCH COMMAND - This text box allows you to run a default set of commands BEFORE the rest of the batch script. This command is run BEFORE the first drawing is opened in the script. Typically, you can set your SDI variable, see Setup AutoCAD 2000 (and higher) - SDI system variable The above two command sequences are handy if your AutoCAD loads a default template and runs commands on it each time you start AutoCAD.

You configure the chat settings in the global.asa file or alternatively in the login.asp file if you cannot create an IIS application.

Show / Hide - click this to either bring the Desktop Agent window onto the screen, or minimize it to the window system tray icon. Check for updates - configures the Desktop Agent to check for new updates in set intervals. This does not shut down the Desktop Agent. Proxy server settings - configures the Desktop Agent to access the internet through a firewall via a proxy server.

The main network settings for the unit can be set in configuration. To assign the unit a static IP address, fill in the Static IP address field, Static Net Mask, and Static Gateway fields. Make sure the DHCP checkbox is uncheck if using a static IP address. The next two drop-downs let you enable/disable Telnet and SNMP. The HTTP Services drop-down lets you choose if you want to allow HTTP, HTTPS, or both. The last two input fields let you set the HTTP and HTTPS ports.

For the unit to know the date, it needs to be able to connect to an NTP server. The IP address for two servers can be entered. If these fields are left blank the unit will use the default addresses of 192.5.41.40 and 192.5.41.41. To adjust the time retrieved from the NTP server for time zone and/or Daylight Savings, use the "Time zone offset from GMT" field.

Firstly make sure that you are subscribed to a data tariff with your current mobile phone service provider. The settings can be downloaded free from www.nokia.com, these will come in the form of a text message. If there are any problems in connecting please contact your mobile phone operator.

By default a Zebra Bluetooth printer comes with the following settings: Authentication turned OFF, discoverable turned ON, and the â??Friendly Nameâ?? of the printer as the printer serial number. Also, the Bluetooth radio in the printer will always be a â??slave deviceâ??. In other words, the printer will never be able to look for other Bluetooth devices to connect to and will never start the link itself. Those are â??masterâ?? device functions. (Handheld computers will be the master devices).

You can configure the JBoss Cache through a configuration xml file or programmatically using a org.jboss.cache.config.Configuration object, passed in to the org.jboss.cache.CacheFactory instance.

You configure each section (numbered 1-10) by pointing DSpy to the proper directory on your network. By putting a shortcut to DSpy in your startup folder, it will start with your TSC client during every boot/login and automatically start tracking your TSC progress.

In this case, and depending on your computer, there coud be different combinations of settings that can work for a given scene, so this time we've gathered some tips about how photon settings work: When photons are used, noise is more likely to appear when light sources are small and powerful, such as small emitting objects, small windows and HDRI with light concetrated in small areas. Photons give information to the render pass about where the light is coming from.

Step 1: Select Configure Settings from the Configure menu of the Image Viewer. GC Image launches a pop-up with various configuration dialog panes. Step 3: Set whether to show graphics in all states or only in graphics cursor mode, set the color for drawing graphics, then click the OK button.