That depends on the model. In many cases, we recommend you use a certified pool table mechanic. If you can’t find one, contact us for assistance.

The brush is the second most important item when it comes to caring for pool tables. Brush the table in one direction only, the same direction each and every time. The most recommended direction is from head to

An occasional once-over with the vacuum cleaner will really help to keep cloth looking new. The vacuum picks up the stubborn lint and micro-fine cat hair that the brush misses, as well as suck any chalk and powder out of the fibers. A lot of people prefer the dusting attachment. The bristles help loosen the chalk as you vacuum the surface of the cloth. They also keep from applying too much suction to the cloth, which can also stretch the cloth.

A pool tables weight will vary between manufacturer, table style / design and the thickness of the slate. A good rule of thumb is to expect the table to weigh between 225 and 300 kiolgrams. Floors that have minimal support will flex slightly as players move around the room. This will impact with the balance of the table over time.

Depending on the manufacture and style of the table, moving can be difficult or may damage the table, if attempted by the homeowner. To properly move a snooker or pool table, it should be disassembled, moved, assembled and re-leveled. When a table is installed it is made level to earth and each piece of slate is registered to its mate. If a table is moved without realignment, it will loose accurate playability and in some cases it will be damaged.

Yes. Contrary to popular belief, our pool table does not take up much booth space. The outer dimensions of the table are 4 ft x 8 ft that is equivalent to the size of two banquet tables. Tip: If space is limited, place the table with one of the long ends nearest the aisle. Accordingly, the pool table only comes into the booth four feet. We will customize your show to meet your unique conditions.

For pool tables, there are basically four sizes. Our clients most often buy whatever size best suits their needs and space. 9 foot is the standard size for professional tournament play. 8 foot and Oversized 8 foot tables are common in homes with smaller rooms. 7 foot tables are sometimes coin-operated and found in bars. Almost all of our new pool tables are available in every size. Pool table sizes are referred to as "7 foot," "8 foot," or "9 foot" out of convenience.

To accommodate the standard 57 inch cue length, we recommend a 5 foot clearance around the playfield of the table. However, this is negotiable with smaller cues and open walls. See above for playfield dimensions. If it appears that you do not have enough room for a pool table, do not be discouraged. We urge you to contact us so that we may provide you with more specific information and consultation. We have extensive experience in helping clients plan the space for their game room.

In billiards, just as in anything, you get what you pay for. We carry only pool tables that incorporate slate beds in their construction. The durability of slate is crucial to good play and long life. We invite you to come in to one of our locations soon and ask an associate what makes a great pool table. Since we service everything we sell, it is important to us that we provide you with high quality and excellent value in all our merchandise.

Yes you can install your own pool table, but we recommend that you get a professional to install it for you. However, if you do decide to install your own pool table, then you should purchase our color DVD pool table installation guide for only $14.95 and/or We can provide a FREE Pool Table Assembly Guide (paper back), upon request.

For a 7 foot table the recommended room size is 12'6" x 15'. For an 8 foot table the recommended room size is 13' x 17'.* Dimensions are based on the use of a regulation 57-inch cue stick.

The table is delivered in its component parts and then assembled in the room where it is to be installed. Some tables will arrive in boxes and others have pre-assembled parts and cabinets. The legs and table frame are bolted together and installed. The table is positioned in the exact location of required. The slate is installed and levelled. The cloth is applied across the slate. The rails (with matching cloth) are installed with pockets.

With reasonable care, a snooker or pool table should last several generations. The slate will outlast all of us.. The wooden components need to be kept dry and free from atmospheric moisture. Except for cosmetic bumps and scratches, there is very little maintenance required. The cloth will need replacement every few years, depending on how much it is played on and how dirty and soiled it gets. There are fabric treatments specific for pool cloth that will extend its life.

Our 7ft pool table size is: 3.5' x 7' (40" x 80"). Our 8ft table size is: 4' x 8' (44" x 88"). Our 9ft table size is: 4.5' x 9' (50" x 100"). Pool table height is approximately 30".

We will refer you to one of our nationwide independent pool table installers or you can purchase our optional nationwide installation service; and we will take care of everything for you.

The majority of English Pool tables are manufactured on production lines from veneered laminates. Dependant on the table design, various laminates are available including, Mahogany, Oak, Ash, Beech, Black Ash and Walnut. Veneered laminate provides a highly desirable cosmetic appeal. With a high quality pool table, other woods provide the structure and strength. It is important however, to know what material (wood) is under the veneer.

J.R. will stop Mid-match actions but cannot stop the use of Pre-match cards used as Mid-match actions because J.R. specifically says it affects Action CARDS, not cards that simulate Actions.

Yes, you can install a pool table or other heavy object on laminate flooring. Please ensure that follow all recommended installation procedures.

Some people do not prefer such for most of them think that the force of those brush will do more damage than

Since most full size snooker and pool cues are 57" or 58"” in length, around five feet of space is needed between the cushion rails and the surrounding walls or furniture. However there are very few recreational rooms that do not have some sort of obstacle that interferes with play. Sideboards, fireplaces, sloping walls and furniture often interrupt and affect perfect cueing room. In some instances a shorter cue may enable play where room space is at a premium.

If that's what does it for you, then, I guess so. Results may vary. We do not recommend licking a pool table without consulting a doctor in advance, though. Sweet Goodness comes from within. One need not consume an arbitrarily large amount of Sweet Goodness to exude Sweet Goodness. You can decide how Sweet Goodness manifests itself in your world. Uh, no. The promotion of Sweet Goodness and related festivities, warmth, and fuzziness does not make money.

We have a pool table and ping-pong table in the El Pescador Bar. Outside we have shuffleboard, horseshoes and bacce ball. Are there a pool table & other table games available.

Yes we have an engineer network that is able to install your machine for you. In many cases however these machines are simply ‘plug in and play’ and the additional cost of installation is not necessary. For arcade machines that require some assembly we will advise at the point of sale that organising an installation engineer would be appropriate. Installation is also available on pool tables, however many people decide to take on the light assembly themselves.

We would recommend that you allow 5ft of cueing room around the periphery of the pool table you choose. This is the length of a standard pool cue. Obviously some rooms will have areas where the cueing room is restricted; this can be mitigated by purchasing a half-length cue.

We recommend 32" - 36" over the playing surface. The light should reach the corner pockets. If you anticipate that your table will be used by inexperienced players, you may choose to raise the fixture slightly to avoid errant pool cue strikes.

Crating your pool table and Scheduling with the Freight Company will take between 2-5 business days. The transit time of your pool table will be between 4-10 business days (Freight Company will contact you 24 hours prior to delivery). For California Residents, our installer will deliver and install your pool table within 2-5 business days (Our installer will contact you 24 hours prior to delivery/set-up).

Several reasons! First, we offer the best high-end pool tables at the lowest prices. Second, we have the widest selection. Third, we have the most distinct, unique, custom styles in the industry. Also, although we may not be local to you, we do have installers in all areas and if there was ever an issue, we would simply send out one of our professional installers to take care it. The fact that we have professionally installers in every state makes us just as good as local.

Yes, you may place our indoor table in your garage area and you shouldn't have any problems with the humidity, etc. (just make sure your table doesn't get wet). If water is an issue, we would then recommend one of our outdoor tables.

The Table Editor is a program will create tables and was packaged with PageMaker 4.0. For PM5 it was omitted from the Mac version. With PM6 it was back for both platforms, but on the PC, Adobe Table 2.5 was only available for those who use Win95. Others must use Table Editor 2.1. In PM6.5 and 7.0 the version is Table Editor 3. Most folks agreed that the early versions had some serious setbacks. Later versions are considered usable by many but there are still many limitations.

Packages are kept in a large 'pool', structured according to the name of the source package. To make this manageable, the pool is subdivided by section ('main', 'contrib' and 'non-free') and by the first letter of the source package name. These directories contain several files: the binary packages for each architecture, and the source packages from which the binary packages were generated.