Search 5,000,000+ questions and answers.

Frequently Asked Questions

What size rim do I need for skinnies, and do I need spacers too?

SSOTN - Modular FAQ
On a GT you can run a single 7/16 spacer and a 15x3.5 in front skinny. The Cobra is a lot more involved. You need to run 2 spacers and put longer studs on for the skinnies to clear the calipers. There have been some questions regarding this mod being legal and safe for certain racing groups but it does allow you to keep your Cobra brakes and run skinnies.
Related Questions

How do I determine my wheel/rim size?

Hubcaps Plus Frequently Asked Questions
When checking tire size it's not necessary to measure anything. The diameter of your existing hubcap or rim is not your wheel/rim size, and will not give you the correct dimension. All tires have a "size series" printed on them that contains the wheel/rim size. This series of numbers usually begins with a P. - (example: P175/70/R15) In the tire "size series" the two digit number following the R denotes your wheel/rim size. (In the example the wheel/rim size is 15")
Related Questions

What size rim do I need to mount a 180 tire?

faq
These are maximum recommended tire sizes for a given rim width. Now before the arguments start, these recommendations come from the TIRE manufacturers, NOT motorcycle manufacturers.
Related Questions

Q6A. Do I really need spacers?

DTW Ceramics Limited, bathroom tiles and kitchen tiles, Port...
Yes, on all wall and floor tiles. Correct spacing allows movement of the building walls and floors without the tiles cracking or blowing.
Related Questions

What size system do I need?

Frequently Asked Questions - Drying & Dehydration | Nyle...
The first step is to determine how much lumber you’ll dry in a year. Then figure your average drying time for each of the species you’ll be drying, and you can calculate the size kiln you need from there. For example: you need to dry 500,000 board feet of oak per year. Fresh off the saw, oak takes about 28-30 days to dry, so you’ll be able to do 12 loads in a year. Each load will need to be 42,000 board feet to give you the 500,000 board feet you need for the year.
Related Questions

Bestswimwear.com Frequently Asked Questions
As we offer many designer swimwear collections from different manufacturers, we chose to simplify sizing selection by providing sizing conversions in the individual sizing selection boxes. You will notice the sizing selection boxes while shopping
Related Questions

Fuzzi Bunz Frequently Asked Questions
With any type of cloth diaper, you need to select the correct size diaper for the baby. With clothing you can get away with sizing up. If you size up with diapers, however, it will only lead to leaking. Even a heavier newborn needs to be in a size small at birth.
Related Questions

Why do I need to have spacers put in before braces?

The Ortho Practice
Sometimes there isn't enough space between certain teeth to insert a metal band or other appliance. Spacers help move the teeth slightly, to create space that is needed for your treatment.
Related Questions

What are Separators (spacers)?

Orthodontic Clinic :: Main Page
Separators are tiny blue rubber bands placed between the teeth to make room to fit molar bands needed for some appliances. [Back to top]
Related Questions

What is a RIM?

The ISP for people with Disabilities, the Elderly & Veterans
A RIM, otherwise known as a Remote Integrated Multiplexer , is a device that Telstra uses to provision telephone services in areas where there is no existing copper, or the existing copper in the ground cannot support the demand for services in the area. Virtually all new housing estates have telephone services supplied by a RIM. Large office buildings, shopping centres, apartment complexes and the like are all "prime candidates" to be served by RIMs.
Related Questions

Nimble Frequently Asked Questions
Tubular style rims are made of carbon/epoxy composite. The CROSSWIND rim mass is approximately 310 grams (700C tubular), making it the lightest high performance aero rim available.
Related Questions

Do you need to use tile spacers when installing the tiles?

Exotic Metal Interiors, Inc : stainless steel, copper, patin...
No, you do not need to use tile spacers to install the tiles. The chamfered edge provides an elegant look when installed "tile to tile". The 45-degree chamfered edge provides a natural caulking channel when the tiles are butted together. The XT-200 mastic allows sufficient time to adjust the spacing "by eye" for difficult areas. *Tile spacers can be used if you require large grout lines.
Related Questions

Do I need to install gaskets with the ThermoBlok spacers, or do they replace the manifold gaskets?

Outlaw Engineering
ThermoBloks should be installed with gaskets, which is why most kits contain extra gaskets for the spacers. Users may elect to apply a "sensor safe" gasket sealant such as Permatex #1 instead. The 1/4" (6.35 mm) addition to the runner length will indeed shift the torque curve to the left slightly, about 50 RPM. This has actually been proven to be a benefit as it helps to restore some of the torque lost due to the addition of larger intakes and exhausts.
Related Questions

What size tank do I need?

Frequently Asked Cichlid Questions
The general rule of thumb in aquarium keeping is to have no more that one inch of fish per gallon of water. Thus, if you had a twenty gallon tank (with no substrate or rocks to diminish the total water volume), you could have five 4-inch fish. This formula also assumes you will change 25% of the tank volume each week. See What is a water change? Why is it important? for more details. Realistically, however, you will need to consider the following factors when choosing what size tank to purchase:
Related Questions

What size weight distributing do I need?

Frequently Asked Questions
Weight distributing is based on the amount of loaded tongue weight the trailer has. To purchase the correct size weight distributing hitch (WDH), you will need to first load the trailer as you would tow it down the road and then have the tongue weighed. You can weigh the trailer tongue by using a bathroom scale or taking it to your trailer dealer to have the tongue placed on a tongue scale.
Related Questions

What size speaker do I need?

HSU FAQ - Frequently Asked Questions
While there is no such thing as "too much" power in a sound system, the system should be powerful enough to fill your room. To help you pick the right product, each HSU speaker and subwoofer has a "Loudness Level" index —a rule-of-thumb guide to point you towards the best system for your space.
Related Questions

How do I work out what jewellery size I need?

Body Piercing, Jewellery Frequently Asked Questions | Flux P...
Our measurements are given in stem thickness first followed by internal diameter/length eg.: 1.6 x 12mm. Our rings are always measured internally. Straight and curved barbells are always measured between the balls. On curved barbells (eg., belly bars) measure the shortest distance between the balls along the inside of the curve. Inches to millimeters conversion (you my need to round up or down to the nearest whole mm as necessary):
Related Questions

How do I determine the size bike I need?

Frequently Asked Questions | Gary Fisher Mountain Bikes
Our best suggestion in your situation would be to visit a local dealer and have them fit you on the bike. Taking a test ride on a few different sizes would also be helpful. It is too difficult for us to make an accurate recommendation as to what the best size bike for someone would be without actually seeing them on the bike. A person's height is usually a fairly good place to start when determining correct size, however each person's physical dimensions (arm length, torso length, etc.
Related Questions

What are Spacers and how are they used?

PACHMAYR FAQ
Spacers are used to add length to a stock. They are placed between the stock and pad, and are ground to size. They are available in black, white, or a black/white combination.
Related Questions

What is laying with spacers?

Western India Ceramics Pvt. Ltd. :: FAQ's
Tiles can be laid with readily available plastic spacers, thereby achieving a uniform gap, and the same can be grouted with suitable grouting compounds.
Related Questions

I don't feel the need to keep the throttle body cool, can I buy the intake manifold spacers only?

Outlaw Engineering
This is a common question made by people that don't fully understand the operation of the system. The throttle body spacer is not meant to keep the throttle body cool, but is meant to keep the intake manifold insulated from the heat of the throttle body. Remember that most throttle bodies are heated by engine coolant to keep ice from forming in cold climates. This heat transfers from the throttle body to the intake so that the intake is now effectively heated from both ends.
Related Questions

Question: I have a bunch of similar spacers that I need. Can I get better pricing?

Frequently Asked Questions (FAQ)
Answer: Yes. You should request special pricing when you have a variety of similar items. We have made groups of items that had the same OD & same ID but the lengths were different. In that case, we calculated all of the parts as one quantity and added a small 'change-over' fee for the length changes. The result was that the customer saved money and we won the order. Answer: Aluminum has proven to be the most economical way to make spacers most of the time for a variety of reasons.
Related Questions

Why can't I find the small or large size I need in a particular size?

Lids - FAQ's
The smallest size we carry is 6 5/8. The largest size is 8. We will always carry core products in full size runs -- 6 5/8 through 8. Unfortunately, our vendors do not always make "Limited Edition" styles in full size runs, so they may be unavailable in smaller and/or larger sizes. We are always working with our vendors to expand size ranges offered.
Related Questions

Do I need a guide or backcountry permit for the North or South Rim Drives?

Canyon de Chelly Frequently Asked Questions | Canyon de Chel...
No, the North and South Rim Drives plus the White House Trail are self-guided activities you can do without a guide or backcountry permit. The rim drives and trail are open all year long.
Related Questions

So can Just install this from Rim's web site or do i need to update both?

BlackBerryOS 4.x Download FAQ - UPGRADE DOWNLOADS - Page 18 ...
Mayurisama, no, it won't make your device available to use on the smartcomm network. The OS and carrier locks are mutually exclusive of each other. hello, im jun from manila phillipines, my brother sent me his 7230, i dunno what happend but it doest have an O.S, i have no cd for it and basically i dont know how to troubleshoot it, i havent use any blackberry hanheld yet. pls help. i wanna know where to dl exact software for it. desktop manager and handheld software (o.
Related Questions

Are there hotels on the South Rim and North Rim?

Frequently Asked Questions
The South Rim has more than two dozen hotels, motels, and lodges to choose from. Lodging located in Grand Canyon National Park are operated by Xanterra South Rim, LLC. Accommodations can also be secured in the Village of Tusayan and the town of Williams, which both lie just outside the park boundary; Tusayan is about a 15-minute drive and Williams a one-hour drive from Grand Canyon Village (traffic permitting).
Related Questions

Are there shuttles available from the South Rim to the North Rim?

Frequently Asked Questions
Shuttle bus transportation between the South and North Rims of Grand Canyon is available from mid-May through mid-October. This service is provided by Transcanyon Shuttle. Group rates for 10 or more people are available. Rates are available by calling Transcanyon Shuttle directly. The shuttle departs North Rim at 7:00am and arrives at South Rim at 12 noon. Shuttle departure from South Rim is at 1:30pm, arriving back at North Rim at 6:30pm.
Related Questions

What if I am not sure about what size display accessory I need?

Fine Home Displays Frequently Asked Questions
Most of the product descriptions on our website provide you with all of the information you need to select the right display accessory to suit your needs. If you need more assistance, our customer service representatives are trained to provide you the assistance you need to select the item that will best display your collectible. You can call our customer service department toll free, or contact us at for more help.
Related Questions

What size cage will I need?

FAQ
This may vary depending on your daily routine. The more time your baby spends in the cage the more room she will need. Remember, most States will have the USDA or State regulatory Department that may determine minimum cage size. Please check for permit requirements and all other paperwork needed, because this will vary form State to State. We recommend a small cage while you are weaning your baby.
Related Questions

Got A Question? Ask Our Community!


More Questions >>

© Copyright 2007-2008 QueryCAT
About • Webmasters • Contact