In many cases, Met-Tile can be installed directly over an existing roof. Ask your roofing contractor for further information. Though Met-Tile costs more "per square" than shingles, it is very cost- effective over time because it outlasts conventional roofing and requires little maintenance. After a number of years, panels can be repainted if desired, often eliminating the need for a far more costly roof replacement.

Yes. SmartVent can be installed at key areas on the roof where ventilation is required or needed. SmartVent can be installed at the ridge on low-sloped roofs or under any shingle coarse from soffit to ridge. This is an incredible advantage to our product. SmartVent is by far the most versatile ventilation product on the market because it is the only ventilation product that allows you to get ventilation on basically any part of your home that is necessary or that you feel looks best.

Usually not if you're installing the metal roof over existing asphalt, fiberglass or composition shingles (maximum of two layers thick). In most situations, the metal roof can be installed directly over the old roof.

Should you remove your current roof before installing another? Although the advantages to leaving your old shingles are obvious (cheaper, less labor, faster), unless the initial roof is a single, problem-free layer, you could be setting yourself up for trouble. The new roof is of a lighter material than the original roof. If you put lightweight shingles over heavyweight shingles, all of the old bumps and ridges from the original roof will still show.

Rustic Shingle is designed to be installed directly over worn out asphalt, fiber glass or wood shingle roofs to provide long lasting, weather tight protection. This eliminates the time, cost and mess a complete tear-off would require. The light weight of aluminum does not add any significant weight load to the house, unlike most other products. However, in same rare cases the old material may need to be removed to allow a secure installation of Rustic Shingle.

Once you have cleaned your roof, Shingle Shield Roof Protector zinc strips should be installed to inhibit the return of algae, fungus, or moss. Stains caused by pollution, pine pollen, dirt, etc., will need to be re-cleaned as deemed necessary to maintain your roof’s neat appearance.

Providing you fulfil the current criteria, there are no specific age requirements. Please take into account however, that the requirement of a high school education or work experience for each principal applicant, at the time of visa issuance effectively disqualifies most prospective applicants who are under age 18.

Most slate roofs are actually very durable and can withstand the necessary foot traffic of workmen. Hook ladders and roof planks can be used to distribute the weight of workmen, and they do help. However, a few broken slates can be expected and are easily repaired in the process of repairing the existing roof. If the work is done carefully by trained workmen, a slate roof will not be ruined by craftsmen replacing broken slates and damaged flashings.

Because of the many types of companies The CPI Group, Inc. works with we are able to help anyone who is over the age of 16.

Even though a Pine Shake roof can be installed over an existing roof it is important that a professional check all eaves and other walkable areas for rotted wood. Repairs must be made before proceeding with the Pine Shake installation. There are unique flashing available for all required areas and this flashing would be used over the existing flashings.

A Galvalume® SSR is an ideal system for retrofit roofing. Its light weight makes it suitable for retrofit applications over any old, leaking, conventional, nonmetallic roof system. Retrofitting is accomplished by installing to the existing roof structure a light weight sub-framing system, generally made with light structural steel sections, that provides a minimum ¼:12 slope for the new Galvalume® SSR.

Yes. Because of the light weight of metal, it is easily installed over existing roofing materials, without the disposal problems commonly associated with re-roofing projects. And, because McElroy roofing panels are installed in sheets, labor costs for installation are kept to a minimum. Back to FAQ List.

A quality contractor will no doubt spend time explaining how important this is. Usually, plywood is used to divert old materials into a dumpster or truck. All windows, doors, and flower beds would be protected. Tarps would be spread out all around the house wherever loose debris might fall. The final cleanup should involve the use of magnets, both handheld and wheel-mounted.

You are eligible to apply through age 84. But don't wait for someone's health to slip, because it could mean the application will be denied. If you can't currently perform one of the Activities of Daily Living, have lost mental alertness, or having medical problems, you could be denied coverage. Besides, the younger you are when you lock in your premiums, the lower they'll be.

No, the GRE must be taken within five years prior to enrollment in the program. You will need to retake the GRE. No, the admission committee is looking for information specific to the physical therapy profession, therefore, the licensed physical therapist is the only acceptable professional for this reference.

There are several steps to coating a roof. Clean the roof very well with either a power washer or TSP, garden hose, and push broom. Let dry for 24 hours. Do any patch and repair needed and let stand for another 24 hours. Roll on first coat at a rate of 400-500 sq/ft per 5-gallon. E?las?tek recommends two coats. Always wait 24 hours in between coats. For more detailed information see our How to Apply Roof Coatings guide.

It depends on the type and size of the greenroof. Most homeowners could check a flat or low pitch greenroof. A roofing professional should if it is too large or intensive – you can include a maintenance agreement of at least twice per year with the greenroof contractor/greenroof company. Or you can work out an arrangement with the roof maintenance staff of your building.

Yes, although we do not recommend the application of our product by a novice do-it-yourselfer. By following our detailed installation instructions, an experienced do-it-yourselfer can install Springhouse Shingles with relative ease.

with most roofing products, the best installation comes from tearing off the existing roof. This is what we recommend for DaVinci products. However, it is not a requirement. DaVinci Slate and Shake can be laid over an existing roof if the situation meets generally accepted industry criteria and local building codes.

A:We believe that just putting a roof on your house is not our only function. We will take the time to protect your home and landscaping and clean up daily.

Murray Shaw Inc. highly recommends the removal of the old roofing material before installing new asphalt shingles. The removal allows a professional to inspect the condition of the existing wood deck and all related roofing components to find any defects so that they can be fixed. Once all repairs are done, new shingles can be installed evenly and effectively.

Yes. Insulation is used as filler between the flutes (or ridges) of the metal roof panels and then overlaid with a rigid board. Both layers may be mechanically attached or adhered to the metal panel roof. The EPDM membrane is then adhered to the rigid insulation or mechanically fastened to the structural purlins beneath the metal roof.

First, determine that the roof is indeed tin, and not galvanized steel. If it is tin, remove any loose rust with a wire brush; then clean and rinse the surface to remove any dirt, mildew or surface contaminants. After the roof is dry, apply a slow-drying, rust-inhibitive oil-based primer followed by two coats of a quality topcoat. Industrial-grade acrylics, slower-drying alkyds and aluminum paints can all be used for the finish coats.

You have to be at least 18 years old. For any question related to EMPLOYMENT, including career advice, fire jobs, and summer hires, please visit our Web site at: http://www.fs.fed.us/fsjobs/forestservice/index.html All Forest Service jobs, along with other Federal agencies, are listed in the USAJOBS database at http://www.usajobs.opm.gov To search ONLY for Forest Service jobs, start at http://www.usajobs.opm.gov/a9ag.htm and choose "USDA, Forest Service.

To be eligible for a CampusDoor loan you must be at least 18 years of age (19 in Nebraska, 21 in Puerto Rico & Mississippi.) Mississippi residents under the age of 21 may borrow with written consent from a parent or guardian. Yes, funds can be borrowed for up to 18 months of attendance. The disbursement dates are obtained from your school's financial aid officer. Generally the disbursement is made immediately before each term (semester, trimester, or quarter) begins.

Provided applicants are eligible to work (16 or above) they are eligible to apply for Police Staff Vacancies.