Can I remotely access the MediaMVP without using the remote control?
Frequently asked questions about MediaMVPIf you download the 'Batch file to turn on the MediaMVP user interface on your PC', located here in the MediaMVP support page, you will be able to control the MediaMVP from the host PC without using the remote. This batch file will turn on the MediaMVP user interface on your PC. Once turned on, the Host PC's Monitor will display a mirror of what you see on your TV set with the MediaMVP.
Related QuestionsI am looking to get into flying remote control airplanes. How do I get started?
Hobbico - Product Frequently Asked Questions (FAQ)I just installed a Hobbico Power Panel. The jack for the starter says, "start/external charger." Can I charge the battery in the flight box through these jacks? It sure would be nice not to have to remove the battery when I need a charger.
Related QuestionsCan I use an IR remote to control a music zone?
Kaleidescape - FAQ (Frequently Asked Questions)The Music Player does not provide any IR inputs. However, it is possible to provide IR control of a Music Player indirectly through an external control system such as those offered by Crestron or AMX.
Related QuestionsHow do I control the computer from a remote location?
Baseline: FAQThe computer can be accessed from any computer anywhere. (With security codes, of course.) A Baseline computer is shipped with pcAnywhere installed for remote access.
Related QuestionsMy remote control range is short. How can I fix this?
Volkswagen Touareg Frequently-Asked QuestionsVolkswagen Technical Bulletin Subject: Folding Key Radio Remote Control, Functions Only at Close Range. Supersedes T.B. Group 57 Number O3-03 dated Sept. 16,2003 due to change in procedure.
Related QuestionsHow can I get another remote control for my system?
Clifford (United Kingdom) - FAQSimply call in to your local Dealer and they can either supply a new remote control from stock, or order one on your behalf. Unfortunately this is a fairly common occurrence, which affects all car alarms at some time or other. In some places you park, you may be near to a Radio or Cellular Transmitter that is on the same operating frequency as that at which your car alarm remote controls transmit.
Related QuestionsMPPT Charge Controllers - FAQThe remote control uses the on board LVD to act as a load control at the command of an external signal. The most usual use is for security systems when you want the lights to come on at specific times. By using a simple timer connected to the remote control, your timer can turn on the load.Related Questions
I-link and Echo-Link FAQ Database - A Bravenet.com Faqhave not ben able to git any mail in my echo-link mail box e mail addres is headrick.1@echolink.com thanks kc5vwe dayton tx I have just started using Echolink, and I would like to know if I have to enter contact on Echolink into my Logbook, as with normal contactsRelated Questions
digibox faqAll the digiboxes use the same remote control, and we're so nice that we send one out with every box.Related Questions
CaddyBug USA - CatalogWith motorized walking carts you have an option of motorized manual carts or fully motorized remote control carts. Manual motorized carts have to be manually steered by the golfer whereas with a remote control you have the freedom to send your cart up to your ball or on to the next tee box. With a manual cart you have to retrace your steps. Say you hit a nice approach shot to a green and it comes up just short. You manually steer your cart to your ball and chip up to the green.Related Questions
FAQsFor enhanced remote control, EchoLink includes a built-in, password-protected Web server which can be set up to accept commands from any Internet-connected computer. Basic functions allow you to remotely enable or disable the link, disconnect stations, and see who is currently using it. The software also supports a basic and extended set of DTMF commands for control over a radio link. For example, you can key in either the node number or the callsign of the station you wish to connect to.Related Questions
Is the remote control a universal remote?
Adelphia | Digital Video RecorderYes, the AT400 model remote is a true universal remote designed to operate all Scientific-Atlanta set-tops and a wide range of TV's, VCR's, DVD's, and other audio devices. There are different levels of code associated with each device. There is primary code to turn a device off and on, but there may not be enough code to work some of the auxiliary functions such as the menus.
Related QuestionsWhat about remote monitoring and remote control?
Onboard Energy, Inverters, Batteries, Battery Chargers, Gene...The lowest cost option is our VE.Net enabled GSM/GPS Module. This module can be controlled with SMS messages. It can also be set to send SMS messages in case of alarms (including burglar or bilge alarms) and it will of course send SMS messages with position coordinates. In addition, VE.Net DC can be used to remotely switch on or off any DC or AC device. The more sophisticated solution is the VE.Net Connectivity Module. In addition to the functionality of the of the GSM module, the VE.
Related QuestionsHow can I take long (BULB) exposures using the optional RM-1 Remote Control?
EVOLT E-510 > Frequently Asked QuestionsAim the RM-1 Remote Control at the Remote Control Receiver and press the [W] button on the RM-1 to open the shutter. The shutter will not be released if the subject is not in focus. The photographer should stand behind or to one side of the camera so that the autofocus does not focus on the photographer. Under bright light conditions, the remote control lamp may be difficult to see, making it hard to determine whether or not the picture has been taken.
Related QuestionsHow can I control Squeezebox with my universal remote?
Slim Devices : Product Info : FAQSqueezebox will respond to the infrared signals intended for a JVC DVD player. The instructions that came with your remote control tell you how to program your remote to send these codes. If you have a Philips Pronto remote, check the Plugins page on the Slim Devices website for some pre-programmed screens for this remote. To remove a song from the "Now Playing" playlist, navigate to the "Now Playing" menu, scroll to that song in the playlist, then press the ADD button.
Related QuestionsI just want a remote volume control, not source selection. Is there a way to do this?
Technical SupportAll selection and level is done either on the front panel or at the remote; never both locations. Connecting just a VR 1 to the CP 64 or 52 remote control terminals will allow level adjustment. However without a source selector the unit will default to source one. If the PRIORITY / L4 INPUT automatic switching is enabled, then the unit will select the L4 signal when present and L1 at any other time.
Related QuestionsDoes Pleo have a remote control?
PleoWorld - The Home of Pleo, the Robotic Baby Dinosaur from...No, Pleo does not have a remote control. You can interact with Pleo but you cannot control his movements.
Related QuestionsHow can I Remote Control my Macintosh client?
Terminal Services - Frequently Asked Questions - Administrat...To connect from a Windows OS client to a Macintosh client, use VNC. The Apple Remote Desktop client has a built-in VNC client. Check in the Sharing Preferences pane in System Preferences.
Related QuestionsIs it possible to control QEMU remotely (remote QEMU monitor access)?
FrequentlyAskedQuestions - #qemu WikiThe QEMU monitor can be redirected else where using the -monitor specifier. For example, you can have the monitor listen on a host port for remote connections via telnet/netcat/etc (example will be added later).
Related QuestionsCan a remote control be used with the C-750 Ultra Zoom?
C-750 Ultra Zoom > Frequently Asked QuestionsThe C-750 Ultra Zoom does have the remote feature capability. The remote control (RM-1) is an optional accessory available at dealers or on the Olympus Emporium. The FL-20, FL-36, FL-40 or FL-50 dedicated external flash can be attached directly to the hot shoe on the camera. To use the FL-20, FL-36, FL-40 or FL-50 flash off-camera, you will need a bracket and appropriate flash cable.
Related QuestionsQ7.10) Can we use the LEGO remote control during the competition?
Unofficial FIRST LEGO League (FLL) Frequently Asked Question...Good try, but NO! It would not only control your robot but the other team's as well. It also violates the AUTONOMY rule and the spirit of FLL. A remote has benefits during testing in the pit area, but should be left there. Do not even bring it into the competition area. Remotes make referees very nervous. Nervous referees may confiscate the remote for the rest of the competition. No. You cannot come to the table with your own team's objects all built into a container and use that instead.
Related QuestionsCan the signal from the remote control be used for other things?
Slim Devices : Product Info : FAQThe third-generation Squeezebox has a completely redesigned form factor and is functionally identical to Squeezebox2. Features that distinguish them from the first-generation Squeezebox include: Stunning animations, transitions and visualizers, including a full screen, 64-channel, 30 frame-per-second stereo spectrum analyzer.
Related QuestionsHow do I program the RC program for my remote control?
FAQRun the program and press ALT-R to start a recording session. At the end of the session you should have a simple .RCF file which you can use. You can then adapt that file following the examples in the manual. Please read the fine manual that comes with the program.
Related QuestionsI do not seem to be able to get the [name of device remote control] to work. What is wrong?
FAQTry changing the distance between the remote control the HP-100 or the HP-100 and the device you want to control. Also try removing the plastic IR cover when recording and/or sending. IR is programmed to use 40KHz as the carrier frequency. There are some devices that use another frequency and therefore can not be controlled by IR.
Related QuestionsHow can I use a computer infrared port as a remote control?
FAQFor the basic principles read the paper titled "Programmable appliance controls" available on my publications page. Sorry, I can not help you. I obtained the details for accessing the HP-100LX ports under a non disclosure agreement from HP; I do not have any information for other computers. To obtain the information for programming the HP-100LX contact Hewlett Packard and ask for the software development kit. Yes; no; no; no; no. Sorry if I sound negative.
Related Questions