A You can install conventional side mirrors. But we like the idea of rearward-looking video with LCD panels mounted on the instrument panel to provide a panoramic view behind the vehicle.

No. Again, if the operator’s rear vision is obstructed and a mirror would help, then one should be used. Careful here, using the fact that operators become “lazy” with mirrors because they don’t turn around and look in the direction of travel when reversing is not a valid reason for not using mirrors. Properly trained and supervised operators should not do that anyway.

A.You can adjust the angle of the rear view mirrors on the Miscellaneous tab in the Garage. Use the Test Drive button to head out onto the track to check your adjustments

I use a respirator but I still wonder if I could be harming myself. What do you think? You are right to be careful. Here's rest of our response...

The mirror links are alternative options for you to download the file from. I may occassionally upload files to places other than megaupload. I'll sometimes upload files to places such as sendspace, or filefront. You will then have the option to download the file from one of these other places. (do not request for mirrors)

This is commonly referred to as the "clown nose". It houses a LED that flashes when the alarm is armed (IF you have the alarm installed). For cars without the premium package (which includes the auto-dimming rear view), it also functions as the dimming lever- Just twist it! Check to make sure that your gas cap is screwed on tight. If not, the SES light will be on for the next few days. First, it is NOT normal for your car to operate with a temperature in the 'red' zone.

Yes! But it takes a little doing. The 2609 Clear View Kit is the one to consider. The grids are spaced 1.25in apart on the kit for 13in total height. The Miata has about a 10x29in rear window so at first blush the 2609 is to tall and does not meet the 40in minimum. Many owners have cut the heating element paper and side bus bars to allow closer spacing. The shorter length will make the grid run a little hotter.

Yes. A growing number of our designs already have a rear elevation available by clicking on the "rear elevation" link under the front view. If you don’t see it, simply write or call and we will send you one by fax or e-mail.

Some of the plans have the rear elevation included in the Downloadable PDF files. For plans that do not have the rear elevation on our website, please contact us and we will either fax or mail the artwork to you. Unfortunately, we cannot email these images at this time. Some cities and states now require a licensed architect or engineer to review and "seal" a blueprint, or officially approve it prior to construction due to concerns over energy costs, safety and other factors.

Swapping your rear view mirror to your new windshield is part of our job. There is not an additional cost for this service.

Glass or mirror-grade virgin acrylic with a silver coating on the back side. The Silver coating is coated three times with an epoxy paint.

Today, almost all airboats are rear prop pushers but it was not always the case. Rumor has it that the first airboats had the prop mounted in the front which quickly led to the invention of goggles and ear plugs :-) For many reasons using a rear mounted engine and prop to push the craft worked much better the other designs.

Not necessarily. The system can be used in a number of applications, rear and side views are popular because of the obvious blind spots that exist there but you may install only one camera if you prefer.

A The front is foam-filled and the rear tire serves as a rear bumper. A frontal impact will likely damage the removable front clip. The rear wheel is capable of absorbing a much greater impact without damage.

A. The 20 to 24 mm diametre long-lines are buoyed by numerous plastic floats and held in place with large iron or cement anchors. Then the oysters, held in 6 or 8 pocket netting panels, are suspended with dropper-lines attached to massive long-lines so that oysters hang a few metres beneath the surface where maximum food is available.

A This is one of the best features of our bikes. Note the forces on the front wheel are push based, and pull based on the rear. Pushing is "harder" than pulling, hence more energy is wasted up front. Hence we thinned the front tire. Additionally, the seat tube is angled back more weight is distributed towards the rear of the bike. Hence we put a wide rear tire for traction. This configuration is highly efficient, and very safe.

A diagram view is a new feature in MOM 2005 that provides a graphical representation of your servers and their health. This view appears in the MOM 2005 Operations Console. A diagram view is also referred to as a topological view.

A state view is a new view in MOM 2005 that shows the health and state of your environment. A green light indicates a healthy state. A yellow light indicates degraded, and red indicates critical.

A database view is a temporary, selective representation of database fields from one or more tables. The view data is held in a structure that behaves like, and can be treated as, a standard database table. The field values held in a view are dynamically updated as the tables they refer to are changed, so the view is always current. Database views are created by assigning the results of a standard SQL query to a named view, as in the simple example below.

Stained glass is not at all like photography or printmaking, where the technology itself makes it possible to create multiples which are all exactly alike. With stained glass, every single piece, no matter how large or how small, must be hand cut one at a time. Since each sheet of glass is different from piece to piece, it is inevitable that every mirror we make is unique, and therefore in its own way is truly one of a kind.

A)No, so long as it is safe to drive over them. That is what they are there for, to protect a vehicle turning right, from other traffic. Also, often it is almost impossible to get positioned properly in the centre, if you do keep out of them.

Be careful around the defroster tabs on the back window-they can snap off quite easily, and no, you can't fix them with super glue. It must be fixed with special glue that conducts electricity, and you don't have that in the junk drawer-trust me, I looked. Check with an auto parts store or glass shop. If you happen to whack the rear view mirror with your hand and pop it off of the glass, make sure you use rear-view mirror adhesive to fix it.

These systems are safety products which can help save lives and prevent unnecessary accidents while backing up. They allow the drive to see behind the vehicle in the area which mirrors alone cannot reach, also called the Blind Zone.

This is the wire to be connected to your vehicle reverse mode electric circuit. When it is connected, the system is automatically turned on when your vehicle is in reverse mode. However, most of our customers find they would rather to not use this auto function, in that case you should use black tape to make sure the blue wire is NOT connected to anything else.

For years we've been asked, "Does AutoWindow work in my <brand> car?" The problem of many vehicles is they don't permit electric window operation while the car is off. Our friends at DEI have made a module to provide one-touch up/down on cars with power windows and it fits almost any car imaginable! The module is called DEI530T.