What if my lamp is discolored?
UV Curing Lamp FAQDiscoloration can occur for several reasons. There is natural "blackening" of the quartz tube at each end during the life of the lamp. This is the result of the electrode material depositing on the inside of the tube during its use. Discoloration of the quartz will occur over time due to natural solarization or "clouding" of the quartz. This occurs as the quartz reverts to its natural crystalline structure, which is opaque to ultraviolet energy.
Related QuestionsWhat is LAMP?
LAMP Frequently Asked QuestionsLAMP is an electronic music library of classical and contemporary CDs that may be accessed across the MIT campus, including in student dormitory rooms and faculty offices. While at MIT, patrons can listen to CDs in the collection on demand, free of charge, over the MIT cable television system. We are using LAMP to research the effects of a more-accessible music library on education and music-listening behavior at MIT. More information is at http://lamp.mit.edu/.
Related QuestionsWho's behind LAMP?
LAMP Frequently Asked QuestionsLAMP is a joint project of the MIT Student Information Processing Board (Josh Mandel/Keith Winstein) and MIT Cable Television (Randy Winchester/Jon Ward). LAMP is generously supported by MIT iCampus (MIT/Microsoft Research) and StreetFire Sound Labs, and is supervised by Professor Hal Abelson.
Related QuestionsMy teeth are discolored. What can I do about it?
FAQThere are many options and varying results depending on several factors: 1. The cause of the discoloration--2. Your expectations--3. Economic considerations. If the discoloration is due to discolored fillings in your front teeth, a resolution could be as simple as replacing the discolored fillings with bonded composite fillings. If you feel your teeth are too dark, bleaching them is a non-invasive, conservative treatment that will lighten and brighten your smile.
Related QuestionsWhat causes discolored teeth?
Twinbrook Dental Center FAQMany conditions may cause the teeth to be discolored (brown, gray, yellow, orange, black, etc.) Some of the causes include foods, chemicals ingested during the early years of life (ex: Tetracycline), injury to the primary teeth affecting the permanent developing tooth follicle, excessive fluoride ingestion during the first few years of life, genetic conditions, childhood diseases, external stains due to foods, smoking, etc.
Related QuestionsWhy is my bottle of Nursery® Water discolored or have mold?
Nursery® Water - Frequently Asked QuestionsIn most cases, discoloration is caused when particles of formula inadvertently enter the bottle of Nursery® Water when preparing your child's bottle. When mixing Nursery® Water with formula, it is important that you pour the water into a clean bottle first and then add the correct amount of formula. Formula particles that enter the bottle of Nursery® Water may also cause mold if not handled properly. Nursery® Water has fluoride added in a concentration of up to 0.
Related QuestionsMy water is discolored. Why is that?
West Boylston Water District FAQYour water may be discolored for several reasons. Sometimes when the water is treated with chlorine, the chlorine can react with the iron and manganese found naturally in our wells, causing discoloration. Water is also often discolored when the Water District flushes the hydrants and water mains. You should avoid washing your laundry when the Hydrant Flushing Program is going on in your neighborhood. Your water should be clear again several hours after the flushing stops for the day.
Related QuestionsPublic Works Commission - Consumer Frequently Asked Question...Cloudy water is caused by tiny air bubbles in the water similar to the gas bubbles in carbonated soft drinks. After a while, the bubbles rise to the top and are gone. This type of cloudiness occurs more often in the winter, when the drinking water is cold. Potential Solution: Let the water run for a short period of time and check periodically for water clarity. Rusty brown water is caused when the hot water tank is rusting or water pipes in the street leading to your home may be rusting.Related Questions
What can I do for discolored teeth?
Cosmetic Dentistry and Reconstructive Dentistry FAQsIf the only concern with your smile is the color of your teeth, there are several whitening options available for you. We offer both in office, Zoom Whitening, and take home whitening. After careful consideration an informed decision can be made for which option is best for you.
Related QuestionsWhat can I do about the discolored water?
Central Arkansas Water/source/faqDiscolored water can be caused by many factors, i.e., construction in the area, lightening strikes, operation of a fire hydrant, natural ground movement, and adding additional pumping capacity to the water system. Because most of these factors can not be anticipated or controlled by CAW, it is necessary to address the situation after it has happened. Determine if the discoloration is in your hot water or your cold water.
Related QuestionsWhat if my lamp is bowed?
UV Curing Lamp FAQA bowed lamp should be replaced immediately along with evaluation of the lamp cooling system. This condition is a direct result of improper lamp cooling. The lamp must be controlled where the surface temperature is between 600 - 800 degrees C. If the air around the lamp is not properly controlled, this temperature will rise causing the quartz tube to soften and lose its rigidity. Adjust the cooling and airflow around the lamp to reduce the temperature of the lamp body.
Related QuestionsHow often will I have to replace my lamp bulb?
Acrylic nails, Gel nails and a full line of personal nail ca...It depends on usage, however, we recommend you change it on a yearly basis for maximum performance. The bulb is guaranteed to last 1,000 hours. No problem. But do not remove the acrylic by picking or peeling it off. Since acrylic penetrates the nail bed, peeling it will damage the natural nail. Using a file, buff the acrylic down almost to the natural nail and proceed with the LUME' ® Nail system process.
Related QuestionsHow do I change the lamp in my flashlight?
Surefire Flashlights and Tactical Products - Frequently Aske...Remove the flashlight head by rotating it counterclockwise. Remove lamp/reflector assembly and replace it with a recommended assembly. Using a 5/32" hex wrench (included with the 10X), remove the Allen screw in the center of the spring at the base of the head. NOTE: Avoid touching glass lamp envelopes (the "bulb"). Oil from your hand will degrade the surface and affect the performance of your SUREFIRE flashlight.
Related QuestionsHow do I recycle a coated lamp?
Shat-R-Shield Frequently Asked QuestionsPlastic coated lamps can be recycled, however they often must be stripped of their coating before they can be recycled. Shat-R-Shield's Shat-R-KoteŽ can be easily removed from the lamp surface by slitting the coating and peeling it away from the lamp. The coating is 16 mils thick, so it peels away easily. Some recycling companies will strip the lamps for you, but there is often an added fee for this service.
Related QuestionsDo I have the option of a 110v or 220v lamp?
Acne Treatment with Acnelamp | Red and Blue Light TherapyCustomers which reside in countries that use 220v will receive a 220v power supply unless otherwise requested.
Related QuestionsWhat should I do if I have a defective lamp?
Litetronics International - Frequently Asked QuestionsFor the quickest and most effective service, please contact the distributor from whom you purchased the lamp. If you are a Litetronics distributor with a defective product, please contact us.
Related QuestionsWhat is a fluorescent lamp?
Light Corporation FAQ: questions & answers about fluorescent...A high efficiency lamp utilizing an electric discharge through low pressure mercury vapor to produce ultra-violet (UV) energy. The UV excites phosphor materials applied as a thin layer on the inside of a glass tube which makes up the structure of the lamp. The phosphors transform the UV to visible lights.
Related QuestionsHow can I tell if a lamp is an additive lamp?
UV Curing Lamp FAQIf the lamp is not operating you will see a yellow brown deposit inside the lamp in addition to a bead of mercury for Gallium lamps. For iron additives you need to look very closely but metal like "filings" are visible on the inside of the lamp. You can also tell lamp type by looking at the color of the light when operational. NOTE you should never look directly or indirectly at reflected lamp light, as it is DANGEROUS.
Related QuestionsIs the 150-watt quartz lamp the brightest modeling lamp that I can use?
AlienBees: AlienBees Frequently Asked Questionswatts is the maximum power recommended for your modeling lamp. This allows the cooling fan to maintain low internal temperatures. It is possible to use a 250-watt quartz lamp if particular care is taken. As a 250-watt bulb produces more heat, you should not operate your flash unit for extended periods of time with this bulb in place. You will need to be cautious when using this bulb, ensuring that there is adequate airflow.
Related QuestionsWhy are my toenails becoming thick and discolored?
Philadelphia Foot Doctor Frequently Asked QuestionsToenail problems are common complaints in the podiatrist's office. They include thickening, brittleness, discoloration, and ingrown toenails. Nails, like hair, are an appendage of the skin. They are formed by layered sheets of protein with traces of other substances. Contrary to popular belief, there is very little calcium in nails. The normal toenail may be from 0.05 to 1.0 mm thick, and grows its full length in about six to twelve months.
Related QuestionsFrequently Asked QuestionsIf only the hot water is discolored, then the problem is in the hot water heater, and the unit must be flushed out. (The manufactures instruction should be followed) Iron from our ground water wells is sometimes deposited in the water mains, and when the normal operation of the distribution system is disrupted, the iron is picked up from the bottom of the main and carried along with the flow of water and occasionally into our customers homes.Related Questions
Skin- How To Remove Discolored Patches?
Skin Care - What Are AHAs?Once you develop discolored patches on skin called melasma, removing them is a slow process. But they can be removed and you can get your young look again. We have to use bleaches and remove the color. Find out more about which bleach can be used and how to use it to get blemish free skin.
Related QuestionsWhy is my aluminum discolored?
FAQSturdisteel Company designs, fabricates and installs grandstands, bleachers, and stadium seating in all 50 states and overseas. Aluminum extrusions are used for seats, riser boards and footboards in all of our designs. The seats and riser boards are usually specified to have an anodized finish, which provides a uniform satin protective film finish on the aluminum. The footboards are usually specified and provided with a mill finish, which is shinny when new and dulls with age and usage.
Related Questions