Yes, you can use any number of gases in your mixture. The instruction manual gives simple math to determine the linear "k-Factor" to apply to the reading if you purchased your meter for air and use it for a mixture of Nitrogen and Argon as an example. Feel free to click the Technical tab on the left to download the instruction manual that gives very good examples.

Most motorcycle tuners will suggest a 32-1 mixture. This does depend on the type of oil you use, assuming that you are using quality oil, generally a synthetic or semi-synthetic lubricant. Keep in mind changing mixtures can vary the jetting, so find what works and stick with it.

You can create gas mixtures with the optional Chempak add-on. The AFT Standard gas database does not support mixing. To create a mixture, open the System Properties window from the Analysis menu, choose the Chempak database, and then click the "Create New Mixture and Add..." button. Here you can specify the mixture components and percentages.

See How to Read Your Meter for details on how to read your gas meter. You may also be interested in information regarding our 2001 meter reading schedule.

That depends more on the type of oil you are using more than the brand or type of equipment. We recommend using a quality name brand of two-cycle oil, such as Stihl®, Echo® or Red Max. Different manufacturers make oil with different concentrations. Years ago, the standard was 20:1, then 32:1. Today, the best quality oil is usually 40:1 or 50:1. It is usually sold in bottles that are pre-measured for one, 2.5, or 5 gallons.

Almost any brand of peat based potting mix for containers or hanging plants will work. You’ll need 2 cubic feet (quarts) per box and 1 cup of dolomite or hydrated lime. Try to find potting mix without fertilizer already mixed in.

It may be necessary for you to shut off your gas meter in the case of an emergency. Turn off your gas meter ONLY if you smell gas or hear the hissing sound of gas escaping. Click here for detailed instructions and diagrams on how to properly shut of your gas service. And remember to keep a 10" to 12" adjustable crescent wrench with your emergency supplies, or next to your gas meter shut-off valve.

If you are in the process of building a new home or business facility and wish to arrange for the installation of the natural gas service line (from the street to your structure), simply fill out the online Service Line Request form. Note: Be advised that installation times can vary between six to eight weeks after receipt of request. If the service line is already installed at the property, and you need a gas meter installed, fill out the online Meter Set Request form.

The gas meter number is a unique number that identifies the gas meter at your property. It is sometimes also referred to as the MPRN (Meter Point Reference Number) or 'M' number for short. The number is 8 to 10 digits long and can be found on your gas bill. If you cannot find your M number, you can obtain it by calling either your current supplier, or the Meter Number Helpline on 0870 608 1524.

Yes! A geothermal EES uses electricity to transfer the ground’s heat, rather than creating heat by burning natural gas. You can have the utility company remove your gas meter, and have an EES provide all your home’s heat and hot water requirements.

A meter reading is the method of measurement by which CenterPoint Energy determines how much natural gas you have used since the last meter reading and how much you should be billed. Meters may be read manually or remotely using automated meter reading equipment. You may receive an estimated bill if CenterPoint Energy is unable to get a current meter reading in a particular billing period (see additional information below). back to top

We own and use an Electrophysics GRP 33 Marine Moisture meter. We probably will not use it on the bottom of the boat during a standard pre-purchase survey (unless it is a dry-stored boat). They are useful to assess moisture intrusion into cored decks, or in wood cored transoms or stringers. Most people, including many surveyors, do not understand the workings of moisture meters or the constraints necessary to achieve a reliable reading on a boats hull.

Mix 3.2 ounces of Poulan 2-cycle air cooled engine oil to one gallon of fresh unleaded gasoline to obtain the recommended 40:1 fuel to oil ratio. Over a period of time oil will separate from gasoline. To properly insure oil and gas mixture,we recommend thoroughly shaking your oil and gas mixture before refueling your unit. Back to Top >>

This is possible as long as the mixture is not too complicated. Contact our applications Department for pricing and availability of gas mixture calibrations.

Considerations of safety and performance should come first when thinking about using homemade mixtures. With mix-at-home recipes, responsibility for product label information falls on the person following the recipe. That means that the consumer should prepare a label that includes the names and amounts of ingredients; emergency treatment guidelines; safety procedures for mixing, combining with other products, usage, etc.; and complete directions for use.

Most commercial potting soils work quite well. Make sure the pot is large and that it has drainage holes in the bottom. Yes it will. There is no one fertilizer that is clearly best. Satisfactory results can be achieved with different products. Some of them are: Scott's All-Purpose Plant Food 18-13-13 lightly sprinkled on the soil about once every six weeks; fish emulsion (but this is not for indoor use as it stinks); Miracle-Gro added to the water once a week (1/4 tsp.

After a lot of discussion on the web about this I contacted an oil company who advised that due to the improvements in 2 stroke oil technology less oil was required these days. I use 25:1 with no problem whatsoever and no smoke either! Never, ever use marine two stroke oils as I am told that this contains detergent additives.

The customer or the customer¿s contractor is responsible for furnishing and installing the gas piping on the downstream (or appliance) side of the meter. The gas piping on the downstream side is then inspected in accordance with local codes. After passing the inspection, Nashville Gas will install the gas meter and associated components. Nashville Gas owns all gas piping upstream of the meter.

The information contained in this site was valid at the time of posting. The County of Belmont assumes no liability for damages incurred directly or indirectly as a result of errors, omissions, or discrepancies. Moreover, the County of Belmont is not responsible for the content nor endorses any site which has a link from this site.

Contact Puget Sound Energy for information on gas service in your area and to schedule the installation of gas service to your home or business. 1-888-225-5773.

If feasible, we suggest the gas & electric meter be located on the same wall within 10â?? of each other. All meter locations should be approved prior to installation.

If you are a Customer Responsibility Program (CRP) participant, you pay a reduced bill based on your income. This amount is less than the actual cost of the gas you use. If you are thinking about participating in the Customer Choice Program, you should compare the actual cost of your usage and not the amount of your CRP payment. If you decide to select a new gas supplier, you will no longer qualify for the CRP discount and will be responsible for the actual cost of your gas supply and delivery.

Obtain a gas pressure test permit from Building Safety (480) 644-2231. When the pressure test is approved, Utility Services will be notified to install the new meter. Also, be sure to set up your utility account with Customer Service. Contact Customer Service at (480) 644-2221, visit one of the offices at 55 N. Center or 6935 E. Decatur, or visit their Web site.

Most lanterns are rated at 3451 BTU. They do not use a lot of gas. They simply keep a pretty flame glowing with soft light and use little more than a pilot light.

You may be required to have your debit card balance verified before making purchases at certain retail establishments such as gas stations. This is the policy of these establishments to ensure purchasers have adequate funds on their debit cards to cover desired purchases. This might prevent you from using the pay-at-the-pump feature at gas stations, but you will still be able to use your card to purchase gasoline at these establishments by simply taking your card to the cashier for verification.

No. The member is responsible for ensuring the tank is at least one half full for the next user. If the gas level goes below 1/2, the member fills the tank and submits the receipt to The People's Car to have the cost deducted from their monthly bill. Return to top...

The gas usage varies by set size. A 24" vented set on natural gas consumes 90,000 BTUs. Look here for the BTU inputs of all our products: http://www.FireLogs.com/BTUInputs.htm