No, tile installation is not recommended over gypsum products. The moisture in the setting materials will deteriorate the gypsum cement.

It is not recommended to install tile over gypsum products. The moisture in the setting materials has a tendency to deteriorate the gypsum cement.

Layout - My husband is having trouble with the layout/cuts in the ceramic tile for our tub/shower area. There is an uncentered window in the primary wall. He keeps saying "no matter how I figure it, I still end up with 1/2" gap at the top of wall". Is there any way you can tell him what he's doing wrong? Thanks SOOO MUCH! Exterior Chimney - Do you have any information on tiling the exterior of a stucco chimney? Below freezing in winter.

Yes. However, we recommend unglazed, frost proof tiles for outdoor use. Look for tiles with absorption rates of 0.5% or less.

Ceramic tile can be bonded to ceramic tile with a polymer modified thinset BUT your installation will only be as good as the weakest tile in the old installation.

When adhesive is applied over tile and the panels are adhered to the tile, the solvent in the adhesive is unable to dissipate through the ceramic tile as it would through drywall. Therefore, the only surface it can dissipate through is the plastic surround panel. This can cause the panel to soften or melt. It is also not recommended to install thinner panels over top of ceramic tile. Over time, the tile grout lines can become visible beneath the thin panels.

Concrete Floors must not contain a sealer or finish of any kind. For installing below grade (below floor level, like in basements), we recommend Basement Proofer to prepare concrete floors. First, clean the sub-floor for any remaining dirt and grease. Tiles must be in the room of installation for at least 2 days to stabilize temperature. Never use polyurethane over vinyl tile.

Ceramic tile is a mixture of clays which have been shaped and fired at high temperatures, resulting in a hard body. Ceramic tile is made of two parts: the body, which is called the Bisque and the surface which is called the Glaze. Glaze colors are made from minerals such as gold, sliver, zinc copper, mercury cobalt and others.

Ceramic tile is characterised by its easiness to clean, its ability to be kept from dirt and any type of corruption. You can simply clean your floor with a damp cloth and if the surface is dirty or greasy, cleaning agents such as detergents or bleach may be used. The ability of ceramic surfaces to prevent humidity, also prevents the development of dust mites population and fungi that are easily generated. Ceramic tiles are naturally resistant to chemical and biological agents, and to friction..

You first need to flatten the floor with a skim coat of a Portland cement based patching compound. Or, you can simply install a floating clic cork floor directly over the existing tile.

Although modified thinset will bond to the vinyl floor covering it doesn't mean it will allow for a successful installation. The vinyl should be removed along with the 1/4" plywood underlayment.

A.On the whole, it is not more difficult to install. There are exceptions of course such as the difficulties with thickness gauges, which takes more time in lying out and whether a complex pattern is being used. As for cost it is generally not more expensive except for time spent on laying out patterns and the thickness gauging again, at least for the tile contractors I have worked on projects with. The setting supplies and procedures are the same, but stone is heavier to work with.

Depending upon the type of system you have, it is usually possible to install ceramic over radiant heat floors. Some applications will require a membrane in between the tile and subfloor. Ask your contractor what is best for you. One of the rubs against ceramic tile is that it is cold and hard. There are floor heating systems available to make your floor more comfortable to the touch, but in terms of hardness, yes, ceramic is much like hardwood in that it doesn’t have much give.

No. Mastic is best used for wall tile, especially in high-humidity areas. For most floor installation, we recommend latex thinset.

That would depend on many factors. The biggest concerns are the unsupported span of the rafters and the size of the window and door headers. In many areas where snow load or wind load have already been designed into the structure the additional weight between standard and lightweight roof tile is within the tolerances built into the house. However, if your reroofing project requires lightweight roof tile, Westile offers FeatherStone lightweight roof tile in Colorado.

Cost effective lightweight concrete varies in price by geographical area and by application requirements such as density and strength requirement. It generally boils down to between RM 85.00 ( USD 22.00 )to maximum RM 150.00 (USD 38.00 ) per meter cube.

Lightweight concrete is purchased from LCM and all technology and know how will be transfer to any parties willing to be train in the field of lightweight concrete installation. Those interested will have access to a LCM Foam Generator and all methods of applications. These people purchase their liquid foam concentrates directly from LCM.

The pre-formed foam is added to the cement slurry and mixed in the concrete mixer or in a continuous process. >From that point, lightweight concrete is placed in any way that a fluid mix can be transported. Pumping is the most common method of placement. Tailgate ready mix truck delivery, bucket cranes, wheelbarrows, hand carried buckets and any other acceptable method of delivering a fluid mix works well.

The cement and water slurry should be mixed until there are no dry clumps or balls of cement. The pre-formed foam mixture is then added into the mixture. The foam mixes quite rapidly into the slurry and only requires modest mixing times depending upon the mixing equipment.

Lightweight concrete is a very easily pumped, highly fluid mixture. The bulk of lightweight concrete is placed by pumping. Lightweight concrete typically will move through the pump lines using less pressure than typical heavier grout mixes

Most lightweight concrete is left to self-seek a level and not surface "finished" in the traditional sense. Much lightweight concrete is covered by another material. A floor overlayment type smoother tool can be used simply to break the surface air cells and create a more uniform and polished look to the surface in the rare case when a more uniform surface appearance is desired.

Answer: Yes if there is a metal pan under the lightweight concrete it must be a vented pan. Then the fleece back membrane can be adhered to the lightweight concrete with Solvent Based Fleece Back Bonding Adhesive. The contractor / building owner rep is responsible to ensure that the lightweight concrete is smooth, dry, and appropriate to adhere the membrane to.

A Miracle Method refinished bathtub or tile wall can easily last 10 to 15 years with proper care and maintenance. In fact, many of our customers have told us their bathtubs still look and feel great 15 years after being refinished.

To be used outdoors, the tile must be frost proof and unglazed for floor use. Make sure the absorption rate is 0.5% or less

Tile is actually the same temperature as the surrounding room temperature -- it holds warmth in a sunny room and would maintain a cooler temperature in an air-conditioned room. There are many installation products that will warm a tile.

ASTRA-GLAZE-SW® + units are made in Emigsville, Pennsylvania, South Beloit, Illinois, and Phoenix, Arizona. They are made using high purity, natural grain silica sands and a resinous binder cast onto a concrete block in a thermosetting, glazing process. The result is a hard glazed tile-like surface permanently molded onto one or more faces of the concrete blocks. ASTRA-GLAZE-SW® + blocks are fired at about 500 degrees Fahrenheit in a tunnel oven.

Use a carbide-tipped masonry bit or diamond drill bit; Fegular twist-drill bits can't cut through the fire-hardened glaze. Not necessarily. Porcelain tile is no different in temperature than anything else in the room except that it holds its temperature better because of its mass. Of course, cool is good in warm weather climates and it's easy to warm things up with an area rug or two.

There is no need to wax, polish or buff your tile installation. A damp sponge or mop is all that is necessary for daily maintenance. Special problems? Each of our locations carries a full line of Aqua Mix maintenance products developed specifically for ceramic