The firmware version can be obtained on the Information - System page. It is listed as "S/W version".

Press MENU ? MENU ? 'Setup' ? ENTR ? 'System' ? ENTR ? MENU ? 'Software Version' ? ENTR. The current version of the firmware is shown. Unit ID is also listed.

With the IIGS turned on, press CONTROL-Apple-ESCAPE And go to the Transwarp CDA The ROM version will be displayed on the screen.

The Tracer firmware is the internal program resident in each Tracer that tells the unit who it is and how to react. The firmware version can be determined for all Tracers with the DataTrace for Windows (DTW) software (version 3.40 or later), except those with the earliest versions of the electronics, commonly called Hybrids. To obtain the firmware version, perform a Test Tracer on the unit. When successfully completed click the YES button when asked to view the DataTrace TRACER STATUS REPORT.

Press *#0000# on your phone's keypad to find out your firmware version. We require this when configuring the software for your phone and is also a requirement should you encounter any technical problems.

What is the Shift Key Bug (HEU)? It is a bug that occurs on 100LX ROM versions 1.02a or less. Occasionally, the key that is pressed after the shift key is ignored and the next key pressed is capitalized. If you try to write "Shift Key Bug" it becomes "Hift Ey Ug". This problem is intermittent and not all users observe it. What information is encoded in the serial number? The week it was manufactured.

To determine what version of RADIUS is currently installed on your machine click the "Help" item on the menu bar and select "About." You will presented with a screen indicating the version of RADIUS you are using.

Advanced versus Basic - What is the difference between the AquaCalc 5000 Advanced firmware and the Basic series of firmware.

You just have to press the "SETUP" key on remote control. Then just watch the top menu bar (right part).

The latest software for the PORTADISC MDP 500 is version 1.50. The version is shown briefly after power up on the MDP’s boot-up page. If your MDP contains a version other than v1.50, contact your dealer for instructions on getting your MDP updated to the current release.

Most writing software has an option for showing CD recorder information, which will include the firmware version. Check the firmware version using your writing software, which will have an option for CD recorder information, including the firmware version. Or you can also check it using the RFlash/Firmware Flash Utility program for uploading the firmware.

If you want to know the current version installed on the player you have to do the following operations: All the internal version numbers are now displayed on TV (and the one corresponding to the version is the 4th one).

The firmware version of your AquaCalc is displayed in the opening screens when the AquaCalc is first turned on. Please click here for more information and examples.

The firmware version can be found on the USB Serial Ports Advanced Options tab of the device manager.

Login the router, click "Status" at the top corner, then check "Runtime Code Version". The runtime code version is the firmware version.

Please take out the battery and find a serial No. in the Clip, LXXXXXXXX, and please send us a email (service@fortuna.com.tw) for us to check if your Clip-on is with 2.02 firmware version. If your Clip-on is not the Xtrac 2.02 version and you want to upgrade your firmware, we let our dealers deal with the firmware upgrade for our Clip-on GPS receiver, so please contact your dealer to upgrade the latest firmware version.

Please note you have to use Fortuna made USB cable to update the firmware and when you use the cable, it is better to take out the batteries. Please find the firmware upgrade instruction from the GPSmart download page.

Unless you have hardware affected by a fix (esp. specific 256MB Sandisk cards on Meridan) or you have DirectRoute, my personal advice is to remain on the lowest number above 4.06 that works with your hardware and mapping programs. Some folks on the list are happy with the newer versions, so it's up to you to decide.

With an up to date perl installation one may query the local perl setup and all extensions via the command: perldoc perllocal For the Tk extension: version numbering has changed recently and determining the version of Perl/Tk that you are running now depends on what version you are running: Tk-b10 (and higher) has changed to $Tk::VERSION (rather than the older "$Tk:Version") to be consistent with other packages.

You can use the Maven Help Plugin's describe goal. For example, to find out the version of the install plugin:

FrontPage forms only send email if the host server has FrontPage Server Extensions configured to recognize a mail server. You can direct your host to the FP Server Extensions Resource Kit for information on how to properly set up hosting for FrontPage users. America Online (AOL) uses unique proprietary dialer software. This article describes several items you should keep in mind if you are using FrontPage with America Online's Internet software.

The program version number is displayed on the program header. The header appears on the output screen after starting the program. In the DOS version, you can press the F10 key from the main menu screen, or you can select the output window to view the program header.

This is how you can check your Firmware version number. Press Menu and go to the setup menu (blue wrench on the left). Go in, and then select screen #1. Hold down the center OK button on the 4-way switch and at the same time press the Info button (i+) at the top. This will display a little dialog with the primary version of the firmware. While that screen is visible again press the AEL button and the Info button together.

One way of doing it is to open a picture in a text editor such as Notepad, and search for the string "v552p". The number of the firmware version follows right after that; for example, v552p-A78 means you have version 78. A second method is, when viewing an unedited image in Windows XP, right click on on the image, then click on properties, then metadata, and it should be listed.

Visit 3Com site and check is your update available? (may be it can't be flash at all). Then inform me, if it must be exists - I'll find it and convert it for SMF. Elsewhere I can offer only experimental tested "non-native" firmware.

You can find the firmware version for your writer by accessing the writer's properties through the Control Panel. Your computer may have a slightly different procedure, depending on the MACINTOSH or Personal Computer you have. This is a generic procedure, to be used as a guide to finding firmware versions. Media is available from other sources in an 80 mm. diameter circular format and a variety of custom shapes. An Internet search will provide numerous sources.

Before every attempt to hack your 709, you should always reset the player. This wipes the slate clean and returns the player to it's factory settings. press and hold down the PLAY and STOP buttons on the front panel of your 709 (i.e. not the ones on the 709 remote) keep those PLAY and STOP buttons held down until the "select menu language" menu appears on your TV screen