Will it work without a sound card?
Starship Titanic Frequently Asked Questions - now with XP su...No. The sound is an essential part of the game, and ST will refuse to run without sound support as described in 2.1.
Related QuestionsWill the SignaLink work with my computer and sound card?
SignaLink FAQThe SignaLink SL-1 and SL-1+ only pass audio signals to and from the sound card, so they will work with ANY sound card that has a microphone input and a speaker output. The SignaLink Model SL-1+ also works sound card Line Input and Line Output jacks for greater flexibility. What you should really be asking is if the software will work with your computer and sound card.
Related QuestionsHow do I get my sound card to work?
The Slackware Linux Project: Frequently Asked QuestionsLook in /etc/rc.d/rc.modules under the Sound Support section. There are several examples of modprobe lines for various sound cards. Yours may be listed. If it isn't, you can look in /usr/src/linux/Documentation/sound for specific sound card information. Once you have the appropriate modprobe line or lines for your sound card, add them to /etc/rc.d/rc.modules to have the driver load at boot time.
Related QuestionsCan I have more than one sound card?
Answers To Frequently Asked QuestionsWith the current sound driver it's possible to have several SoundBlaster, SoundBlaster/Pro, SoundBlaster16, MPU-401 or MSS cards at the same time on the system. Installing two SoundBlasters is possible but requires defining the macros SB2_BASE, SB2_IRQ, SB2_DMA and (in some cases) SB2_DMA2 by editing local.h manually. It's also possible to have a SoundBlaster at the same time as a PAS16. With the 2.0 and newer kernels that configure sound using make config, instead of local.
Related QuestionsWhy doesn't my sound card work in full duplex?
Net2Phone - StoreFull duplex (talk and listen at the same time) requires a sound card that supports two Direct Memory Access channels. Early sound cards, including all 8-bit cards, cannot do this. Sound cards such as the Soundblaster 16 and later versions support it, but may not have shipped with the driver software for full duplex. Units labeled "Soundblaster Compatible" may not be compatible in this detail.
Related QuestionsMy computer does not have a sound card. How can I complete this program?
OIO Side BarThe course has the capabilities of displaying the audio as text. Simply click the CC button on the bottom left hand corner to display the text.
Related QuestionsHow do I get my Crystal 4232 sound card/chipset to work?
Linux Gamers' FAQmodprobe cs4232 io=0x534 irq=5 dma=1 dma2=0 note that, although this works for one of the authors, you may need to adjust the settings.
Related QuestionsMy sound card does not work, how to use an external synthesizer with Emacspeak ?
Oralux: FAQFor example, the following line entered at boot time, starts Emacspeak with DoubleTalk LT: knoppix tts=doubletalk
Related QuestionsShould my computer have a sound card and speakers of some sort for this software to work?
Some Frequently Asked Questions About PawSenseThe good news is, most computers nowadays do have sound cards, and a set of typical basic speakers usually costs only $10 - $20. You can buy computer speakers at most computer stores and electronics stores, and the larger office supply stores. You might get the best price on speakers at a medium-size or smallish computer store that assembles custom PCs in-house and also sells parts. You may want to try looking under "Computers - Supplies & Parts" in your local Yellow Pages.
Related QuestionsWhy do I need a full duplex sound card for the Speaker phone to work?
HSP PCTEL FAQThe modem does not have the required hardware to perform this function without a Full duplex sound card. No special connections are required between the sound card and the modem. When the sound card and HSP modem are installed properly with all the correct drivers, the sound cards microphone and speakers will be used for the Speaker Phone feature.
Related QuestionsWill the X-Fi sound card work with Prog Organ?
FAQI haven't tried it yet so cannot give any guidance derived from personal experience. However it appears to be fully SoundFont compatible, therefore it should work. In fact it seems to support the latest SoundFont version, also the latest version (2.4) of Vienna. If it doesn't work with Prog Organ it wouldn't work with a lot of other music apps either which use the same Windows API functions. That seems an unlikely scenario somehow.
Related QuestionsWhere are the vocal cords located? How do they work to produce sound?
Frequently Asked Questions About The Voice and Vocal CordsThe vocal folds are located in your throat above your trachea or windpipe. First, the folds come together in a firm but relaxed way. Once the folds are closed, air from the lungs passes through them, causing vibration and thus making sound. The sound from this vibration then travels through the throat, nose, and mouth (resonating cavities). The size and shape of these cavities, along with the size and shape of the vocal folds, help to determine voice quality.
Related QuestionsWhy doesn't the sound work?
Frequently Asked Questionsmacam focuses on video. Cameras that have microphones almost universally use USB Audio Class for sound. This enables the system software driver to use the camera microphone while macam handles the video. The macam application does not record sound for movies, this is a deliberate choice [what should it sound like at 10x?]. The macam component lets the system deal with sound.
Related QuestionsPlaylistIf this is a networking problem, what is your networking configuration? (And note this addresses most networking issues.) On Vista: open the Start menu. Click All Programs. Select "Maintenance". Select "Problems Reports and Solutions". Click "View Problem History". Look for the crash/error in question. Double-click the report in question. What is that data? (You can use "Copy to Clipboard" to easily include this data in your message.Related Questions
What hardware is supported? Will my sound/graphics/network card work?
Corporate Frequently Asked QuestionsAbout 90% of all hardware available for the PC is supported under Linux. In general, well established brand names will always work, these will tend to cost more though. New graphics/network cards are always being released onto the market, If you buy one of these, you may have to wait many months before support becomes available (if ever). This may not be up to date, so its best to go to the various references listed in this document and get the latest info.
Related QuestionsHow do I record sound to work properly?
iMatchup.com - Find a Matchup todayPlease note when you are uploading your video if you wish to include sound and/or fix the quality of sound you must follow the following steps to insure that your video has the proper sound. Once you log into the video section and are ready to record your video right click over top of the video screen. From the menu, click on "Settings", then click on the picture of a microphone that is at the bottom of the box.
Related QuestionsHow does sound response work?
Soundstream FAQSoundstream consists of moving particles that bloom when the microphone picks up a loud noise. It's fairly sensitive, so you can yell at it from across the hall and have it show onscreen. With pitch response, the stream still cycles through the colors of the rainbow, but a significant difference in the sound spectrum causes a shift in color. It's not perfect for lack of a good algorithm and a desire to minimize CPU usage, but it sure looks cool! You'll want to tweak certain settings.
Related QuestionsWhy can I only hear effects from certain output ports of my multi-output sound card?
Cakewalk - Frequently Asked QuestionsThere is a workaround for this issue. If you don't have audio tracks assigned to the same output ports as your effects loop, you must have a "dummy" track in Cakewalk assigned to the same port as the effects loop instead. That dummy track must contain an audio event, even if it's a recording of silence. (Back to top)
Related QuestionsHow can I reduce noise picked up by my sound card?
Answers To Frequently Asked QuestionsUsing good quality shielded cables and trying the sound card in different slots may help reduce noise. If the sound card has a volume control, you can try different settings (maximum is probably best). Using a mixer program you can make sure that undesired inputs (e.g. microphone) are set to zero gain. Philipp Braunbeck reported that on his ESS-1868 sound card there was a jumper to turn off the built-in amplifier which helped reduce noise when enabled.
Related QuestionsCan I use a sound card to replace the system console beep?
Answers To Frequently Asked QuestionsAnother variant is the beep program found at ftp://www.ibiblio.org/pub/Linux/kernel/patches/misc/modreq_beep.tgz The modutils package has an example program and kernel patch that supports calling an arbitrary external program to generate sounds when requested by the kernel. Version 2.0 and later of KDE allows playing a sound file for the console beep in KDE applications such as konsole.
Related QuestionsWhat is a full duplex sound card?
Welcome to PC2CALL.COMA full duplex sound card is one that allows you to receive and send voice at the same time. In a telephone conversation, this means that you can speak and listen simultaneously. This message means that you are probably running another program that uses the sound card such as playing an audio CD. This prevents PC2Call from functioning.
Related QuestionsShould I consider a new sound card?
MDG Computers Product FAQsA good sound card and compatible speakers heighten your multimedia experience, making it more electrifying, compelling and fulfilling. A sound card will also allow you to add the Dolby Digital surround sound experience with a good set of surround speakers. Ask your MDG store representative for details on compatibility with your computer.
Related Questionsquot;N-01" (US NTSC VERSION)Perhaps you might have pushed the volume control and activated mute. In the case, you will see a message ¡§Mute¡¨ on the top of the screen in portrait mode. There is no Mute indicator in landscape mode. Moreover, in the case of the TV CF Card P-01 (PAL version), you might have selected the wrong PAL sound system. The P-01 supports PAL-B/G, PAL-I and PAL D/K sound system.Related Questions
