Yes, multiple cameras can easily be connected. Clarion has a power box that accepts three camera inputs, with the facility to add on a three camera switch box. Depending on which model, Rear View Cameras Australia has a two, three and four camera input versions. Please click here to view our examples.

There are a few methods depending on the specification of your camera and your requirements. If you require JLIP control of your camera and still image capture to a PC, you could use a product like the JVC GV-CB3 JLIP video capture box which allows still image capture from any analogue video source and control of JLIP devices. However, if your camera is one of our later designs with a PC digital still socket, then you could use a product like the JVC HS-V4KIT JLIP Capture Pack.

PENTAX has prepared several special on-line "Getting Started" sections for each of its individual digital products. This information is available in our Learning Studio and they contain step-by-step instructions (complete with examples and visuals) to assist you in getting your digital camera up and running with your computer. Here you will learn the following:

The drivers for your device are not installed correctly. Please, follow the documentation, that came with your device to setup the software drivers. Generally: if no other piece of software (including the one, that came with the device) can connect to the video device, @ctiVideo will not connect either. Your video device is not compatible with Video for Windows. See the previous question and consult the documentation of your device to check if it is designed to work w/ VfW.

You can connect your internet camera with your home security system by Generic I/O Port. There are four I/O ports, two for input and two for output.

Our video systems are optimized to work the best over low cost broadband solutions such as DSL or Cable. While other options like phone modems, wireless ISP's and T1 lines are possible, we recommend DSL for its balance of cost vs. performance. Our system can utilize any high-speed DSL line that has a Static IP address. A Static IP Address is an address assigned to you that never changes and is the type of IP address that is required for professional systems.

Yes you can, by using one of these DVR cards. You can use a PCI DVR card to install on your desktop PC or a top of the range USB DVR card to connect to your PC/Laptop. It's compatible with Windows 2000/XP/98 and comes with all required software for video recording and editing. If you are computer savy you can even set up your own live Internet monitoring.

Yes. Most of the stations are equipped with built-in card readers so that you don't need your camera to be supported by the operation system ??" You just insert the memory cards (to be always on the safe side, change the switch to the write protection position first). Please feel free to ask for cable or external card reader if needed.

YES. The camera that comes with the TrueView Video Communication Kit is ergonomically designed for desktop conferencing. However, you can connect any video source to the Capture Card. Examples are: Camcorders, Video Cassette Players, Laser Disc Players etc.

The DV 4500's direct print function will only work with printers designed for this feature. Printers that support this feature will be labeled as "PictBridge" compatible. This function will not work with regular printers so you will not be able to connect your camera to them and print.

The procedure for connecting the camera server to a network is almost identical to that of a standard PC-LAN connection. The camera server requires one fixed global IP address.

Yes, the CB-USB4 cable that comes packaged with the camera, is required for downloading images using the camera. The stock number for a replacement cable is (Item #200776). It can be purchased through the Olympus Emporium or by phone at 1-800-201-7766.

When Quickview installs it creates a directory in the following location: C:\Program Files\FLIR Systems\Device drivers. All the drivers required for USB and Firewire cameras are in this location. They can also be found on the Quickview CD.

When Researcher installs it creates a directory in the following location: C:\Program Files\FLIR Systems\Device drivers. All the drivers required for USB and Firewire cameras are in this location. They can also be found on the Researcher CD.

The FL-20, FL-36, FL-40 or FL-50 dedicated external flash can be attached directly to the hot shoe on the camera. To use the FL-20, FL-36, FL-40 or FL-50 flash off-camera, you will need a bracket and appropriate flash cable. Please use the following information as a reference: FL-CB02 Hot Shoe to TTL Cable (item #200663)- this cable is required for the dedicated FL-20, FL-36, FL-40, or FL-50 flash.

To mount an off camera flash to the C-5000 Zoom, you will need the FL-BK01 Flash Bracket. The CB05 Shoe Mount TTL Flash Cable, a PC Synch Adapter and PC Cord are required for non-Olympus brand external flashes or strobes.

A] Mcam100 series are not optical zooming camera and mcam100v3 program has not optical zooming function but it has a digital zoom function only.

The Xtend-a-Slide has 49mm standard photo threads on the inner barrel, and connection is made to the camera either by attaching to the Lens Adapter or Camera threads directly (if possible) or through stepping rings and/or close-up lenses (if required).

No, you can not. But we are now developing a video option for Zummer-GSM which lets you remotely watch at what is going on in the premise where the system is installed. You will be able to do it using a mobile smartphone (a video-enabled mobile phone with a big screen). Today smartphones are available on the market at reasonable prices. We are going to produce two types of video options for Zummer-GSM:

You can connect up to four cameras to the VB101. If VC-C4/VC-C4Rs are used, all four cameras can be controlled.

Mogulus enables you to work with a large panel of inputs. Choose your camera input by right-clicking over the Broadcast Live page and selecting Settings from the menu. You can try each to find which input corresponds to your computer. To see if it works, click for a preview in the blue square where the camera icon is located.

Yes, the CB-USB4 cable that comes packaged with the camera is required to connect the camera to the computer. The stock number for a replacement cable is 200 776. It can be purchased through the Olympus Emporium or 1-800-201-7766.

Good question. According to the USB spec, software is required to connect not only to first tier devices, but also to any plugged into USB hubs. It appears that there is a bug in the Kodak Mounter and USB connection software causing it to fail unless the camera is "device #0", connected directly to the computer.

You can connect your PENTAX digital camera to a TV to view your images individually or in a slide show through the use of a video cable (included with supported cameras). To do so, make sure that both the TV and camera are turned OFF before connecting the cable. Connect the video cable to the video output terminal on the camera. Connect the other end of the cable to the video (and audio for supported models) input terminal of the TV.

A1. You can connect your AV device (eg. DV camera, MD Player) by using the provided AV cable. The AV cable is either hanged outside the AV cabinet or kept inside the box on desktop of lectern.