b) this output is active with all the video sources connected to your TV (some TV audio outputs are only active with composite and S-Video inputs, not component or new digital connections). Yes, absolutely. Using multiple SUBstages in a room not only increases the ability to handle dynamic passages at higher volumes, but when strategically placed (see Using Multiple SUBstages page) can provide smoother, more even bass coverage throughout the room.

First of all, you have to use a very hard pick (a felt pick doesn't get a good defined sound, and limber picks don't either) as that gets the thicker bass sound and with the right amp/bass settings, you never hear a "click" either.

Check out the membersections where you can read what sort of equipment every member of the band uses! In general, no one of us use any effects really. Nikola sometimes use a Sans Amp to add some distortion to the bass sound. Mathias and Erik use the tube distortion in their Mesa Boogie heads. Erik sometimes use a wahwah pedal for some solos and Mathias use a flangerpedal for the beginning of some songs like No Cigar.

Absolutely! The extended frequency response of the PAMDI is ideal for bass instruments. In fact the Low Eq Band is sweepable down to 25Hz. That's lower than most bass instruments but very useful in certain situations. It's all the Owner's Manual that comes with the PAMDI, check it out... The upper end of this range is limited by ‘clipping’ which, in turn is limited by two factors, the supply voltage and the efficiency of the amplifier design.

This is normal for the moment. Analogic outputs are disabled when numeric ones are enabled (and vice versa). So you have to switch your connexion mode if you want to hear sound on TV. In Setup, if you set "Audio Out" : "SPDIF/RAW" you won't have any sound on analogic outputs. You have to set "Audio Out" : "Analog" to hear sound on TV using SCART or Stereo/5.1 connexions.

Yes. If you've already upgraded your computer speakers or don't have a separate sound system of TV, Lola can still greatly enhance your music experience. The Lola remote will still allow you instant access to your whole music library on your computer. And, the On-Screen menus will appear on your computer screen to make it easy to see and select all your music from across the room.

Yes you can. Under the terms of the Sound Ideas End User License Agreement, this qualifies as synchronizing our sounds with other audio content.

Yes you can, provided that the sounds are embedded in the code of your game and are not available for an end-user to access or download. If your application allows the end-user to access or download unsynchronized sounds, you should contact Sound Ideas to arrange supplemental authorization for the use of the sound effects.

Adding sound is simple. Just right-click in the 2D window and choose target->target_speaker. There are some things about sound that are useful to know. First, use the "noise" key to define what sound to play (you can see a list of sounds if you open your map0.pk3 file with winzip and browse through everything in the sounds/ directory). Second, by default, the sound won't play. You either have to activate it somehow (with a trigger usually) or you have to make it looped.

A3: Covered benefits include preventive care, office visits, hospitalization, emergency services, dental, vision,

There is only one plasma TV maker that incorporates built in speakers into the plasma frame (Philips). Most manufacturers do however offer speakers as additional options which can be attached to the side of the plasma TV. Amplification of these speakers comes through built in 7 or 8 watt amplifiers which are built in to the side of the plasma display (this is plenty of wattage for excellent audio output).

Perhaps you might have pushed the volume control and activated mute. In the case, you will see a message ¡§Mute¡¨ on the top of the screen in portrait mode. There is no Mute indicator in landscape mode. Moreover, in the case of the TV CF Card P-01 (PAL version), you might have selected the wrong PAL sound system. The P-01 supports PAL-B/G, PAL-I and PAL D/K sound system. You will need to tap ¡§PAL Sound¡¨ button to select the correct PAL sound system in your country in order to get the audio.

Yes, within the following limits... you can synchronize our sound effects for playback only on your Web site, so that button rollovers "bark" or a banner crackles in the "wind". This type of use is absolutely legal. But you are not allowed to distribute our sound effects in any way - whether you intend to give, trade, loan or sell them. You are not permitted to present our sound effects in any way that would allow access to the sound effects or sounds as downloadable audio.

Absolutely! Bass tones will vary dramatically when driving through a 4-10 cabinet as opposed to a 2-15. Keep in mind that the Cabbone is designed to work with 100 Watt amplifiers. Using a more powerful amp at high volumes could cause the relays to arc. To make sure you do not damage the Cabbone or your amps, make sure you do not drive more than 100 Watts through the Cabbone.

Yes, but you’ll need to use internal batteries as the power supply when using a wireless system.

No, we're sorry. Amps are provided by the organization and all the bands have to use the same backline.

Absolutely! Most bassists don't use a pick at all, but for those who do, try a 3 to 4 milimeter stone pick with a soft Beveled edge. A thinner pick or medium to sharp Bevel will achieve tighter pops and snappier tone. It's certainly not the same as using a plastic pick on bass strings, which is known to sound especially 'scratchy'. Stone picks can be used for almost any stringed instrument and work exceptionally well with mandolins.

The HECAT is designed to be used by state, regional and local education agency staff and others responsible for selecting, supervising, developing or using health education curricula in schools.

Answer: The Link Variables are the only internal variables that will accept ASCII data. You must use the suffix ":A" on the link variable to allow the link variable to store ASCII data. For example: Link\State:A = "On"

A#8.6: Currently the GNO serial drivers only support the two built-in serial ports. This does not imply that you cannot use a serial card in a remote machine (such as a IIe) that is connecting to your IIgs running GNO. A#8.7: These settings will usually work. See the Notes, below.

Yes. The instruments are fabricated using molds and identical patterns, so they end up being as close to identical as possible.

The musical examples use the sounds in your soundcard, so they will only sound as realistic as the MIDI synthesizer in your computer. ActiveBass has provided a selection of six instrument sounds from which to choose (Acoustic, Electric Finger, Electric Pick, Fretless, Slap 1, and Slap 2). This option allows you to choose the instrument which sounds best for your computer setup.

For small events we feature Debbie our female lead vocalist. Debbie has a great voice and, equally important, she is also a great entertainer. Each vocalist is unique because they are the only 'instrument' in a group that plays the melody. This is why live vocals are so important in a performance and also explains why "American Idol" became so popular. Listeners connect more to the human voice more than they do with any other instrument.

The Latest software available for the MediaMVP located here supports up to 12 MediaMVPs on a home network.

With Windows XP you can only use 1 DVB-Card without issues. You can still use multiple analog cards and one DVB-Card. But because of the bug in Windows XP you can't use more than one DVB-Card out of the box. The only exception is the Skystar2 which doesn't use a BDA-driver and is supported by MediaPortal. You can use one or two Skystar 2 TV-Cards along with one other DVB-TV-Card and multiple analog cards with WindowsXP. With "MCE Rollup 2" Microsoft updated the files "mpeg2data.

Shutter priority mode is similar to fully automatic mode, except that you pick the shutter speed. Metering works the same way, but with the shutter speed fixed there is exactly one aperture that will provide the correct exposure in the exposure table. This is what the camera picks for you.

No. You may begin a search for a Department of Education job opening at http://www.jobsearch.edhires.ed.gov.

A3: The manufacturers will have us believe that you can block out any unwanted reflection in glass, water etc. You can *not* block out the reflections in metallic surfaces, since they do not polarize the light. But, although the manufacturers are right for the greater part, you will have to use the polarizer in the right way to get the above effect. This means, you will have to take your picture in a direction perpendicular to the sun (i.e.

As far as I know, you can only get Bass at special events from Capcom. (As with "Mew" in "Pokémon") Those areas need a special condition to be entered. I don't currently know every one... For Internet-14, you need to collect at least 10 chips from Internet-13. Some areas can be accessed if you had a good Busting Level or didn't escape in the previous area, if you fail, you need to return to the beginning of the area.