How do I make my RAID drive bootable?
supportYou need to prepare a driver floppy disk and then following the installation instructions for your Linux or Windows operating system. The latest drivers and Escalade User Guide are available for download from www.3ware.com. Complete instructions for making a bootable array are in the 3ware user's guide, downloadable from the 3ware web site at http://www.3ware.com/support/userdocs.asp. Grub for Red Hat 8.0 does not support arrays larger than 1.7 TB.
Related QuestionsI want to make my USB flash drive bootable, what steps are required for this process?
Removable Media Recovery Frequently Asked Questions - FAQMost laptops now use lithium ion (LiIon) batteries. LiIons should be managed differently from the NiCad or NiMH batteries used in older laptops. In particular, LiIons should not be run all the way down to prevent "memory effect". First, they don't have a memory effect, and second, running them down tends to reduce their capacity. If the laptop does not need the battery it should be run to about 40% charge and stored in a cool place.
Related QuestionsCan I make my Drive bootable?
AcomData: USB 2.0 HD Support PageIt is possible to use an AcomData External Hard Drive as a boot volume on Mac OS 9 and Mac OS X. Follow the instructions in your Mac OS manual for the proper installation of the Mac OS. If you wish to use your AcomData Drive as a boot volume, make sure you install the Mac OS on the Drive before saving any data to the Drive. On Windows operating systems it is not possible to use an external hard drive as a boot volume.
Related QuestionsCan I make an external hard drive bootable?
AcomData: USB 2.0 HD Support PageIt is possible to use an external drive as a startup disk (boot volume) on Mac OS 9 and Mac OS X. Follow the instructions in your Mac OS manual for the proper installation of the Mac OS. If you wish to use your drive as a boot volume, make sure you install the Mac OS on the drive before saving any data to the drive. On Windows operating systems it is not possible to use an external hard drive as a boot volume. Yes, the 2163 does support 48-bit LBA.
Related QuestionsHow do I make a bootable CD with the ISO file?
Darik's Boot and Nuke FAQIf you burn DBAN to CD-R and see just one file when you open the CD-R afterwards, then you have burned DBAN incorrectly. DBAN may not boot if you modify the ISO file or filesystem layout in any way, like by injecting files.
Related QuestionsQ How do I make my USB flash drive bootable?
iPSGA The USB Flash Disk Utility can do this in Windows 98 and Windows ME only. To do this open the USB Flash Disk Utility and go to the Partition tab. Check the Bootable Disk checkbox, select your USB boot type, and then click the Partition button.
Related QuestionsWhat makes a USB drive bootable?
USB Flash Drive Questions and AnswersThe USB flash drive must support bootability in general. (Please check with your USB flash drive vendor.) The USB flash drive must contain an operating system/boot files. Typically, vendors of USB flash drives that support bootability will provide you with a tool that will make the drive bootable. Further, the USB IF is in the process of finalizing a USB bootability specification. Please refer to www.usb.org for further details.
Related QuestionsWhat is RAID?
Kaleidescape - FAQ (Frequently Asked Questions)Redundant Array of Independent (or Inexpensive) Disks. A storage system that employs two or more disk drives in combination for fault tolerance and (sometimes) increased performance. RAID storage systems are frequently used on servers, especially for enterprise applications.
Related QuestionsHow do I make an x86 device bootable?
Driver Development FAQsYou need to write a realmode driver. See the realmode environment sources and White Papers ("Solaris Realmode Environment", "Realmode Drivers", and "External BEF Interface Specification for x86 Realmode DDI"). Unless otherwise licensed, code in all technical manuals herein (including articles, FAQs, samples) is provided under this License.
Related QuestionsCan PowerISO make bootable CD?
PowerISO - Create, Edit, Extract, Mount, Compress, Encrypt, ...Yes. PowerISO can add boot information to an non-bootable image file or read boot information from a bootable image.
Related QuestionsHow do I make bootable LS-120 disks?
The Linux Bootdisk HOWTOSince I don't have an LS-120 drive, the following information is summarized from information provided by Dave Cinege from the Linux Router Project. The LS-120 is an IDE floppy drive. It is compatible with both standard 3.5" disks and the new 120MB disks. As of Linux v2.0.31 there is full support. To be able to boot from these you must have a BIOS that specifically allows the LS-120 to be treated as drive 0 (whereas IDE devices normally start at 80).
Related QuestionsHow do I make an MS-DOS bootable floppy?
Windows 3.1 FAQPlace a blank formatted disk in the A: drive. Then from the DOS prompt of your boot hard drive type 'SYS A:\'. This will place the DOS system files and command file onto the floppy. Note that this will not copy any DOS system configuration or memory management programs. You will need to copy those over to the floppy as well if you need them (fdisk, format, etc.) Sometimes this happens.
Related QuestionsWhat is meant by "SGI-bootable CD-ROM drive"?
Technolust: The Indigo Page (Silicon Graphics - SGI)Easy: the Indigo is only capable of booting from select CD-ROM drives. So if you are buying a CD-ROM drive for an Indigo, take care about which drive you purchase, depending on your needs. Essentially, for a drive to be bootable, it needs to be able to use a 512-byte block size. This usually isn't advertised as a feature, so you're better off going by brand and model.
Related QuestionsHow do I use my USB floppy drive with the Bootable CD-ROM?
LANforge-FAQ - CandelaWikiThese instructions are intended for users who do not have a built-in floppy drive in the machine being used to run the LANforge bootable CD-ROM. The USB floppy drive should already have a disk in it with a license.txt file that you obtained from sales@candelatech.com. Insert the Universal Host Controller Interface Host Controller Driver kernel module: insmod /lib/modules/2.6.18.2/kernel/drivers/usb/host/uhci-hcd.ko Copy the license.
Related QuestionsWhat is Optical RAID?
Ultera Systems | Frequently Asked Questions, Virtual Tape St...Ultera's Optical RAID controller solutions virtualize an array of optical devices using RAID (Redundant Array of Independent Devices) to operate as a single logical optical drive. Seen by the host as a single optical drive with increased performance, online storage capacity & reliability. Optical Striping (RAID Level 0) increases performance and online storage capacity up to 4 times more than a single optical drive.
Related QuestionsCan I create a bootable backup with ChronoSync?
ChronoSync | Index of Frequently Asked ChronoSync Questions ...Currently you can not. It is not designed as a utility for cloning an entire hard drive. There is more to creating a bootable backup than just copying files. However, ChronoSync 4.0 will do this easily. ChronoSync 4.0 is expected to be released January 2008. A beta version will be available December 2007. You can, however, have ChronoSync maintain a bootable backup of your hard drive using ChronoSync to update only changed files after a bootable is created.
Related QuestionsCan you provide a bootable disk image?
Mini vMac FAQNo. This would require Apple System Software, involving issues similar to those mentioned above for ROM images. Except that System Software may be downloaded freely from Apple. Maybe someday. The next computer that I plan to emulate is the Mac II, which has color. (See bounties) Meanwhile, you could try Basilisk II. It might be possible to hack the ROM of the Mac Plus to support larger screen sizes.
Related QuestionsI don't have a floppy disk drive, so I can't create a bootable disk. How can I restore my HD backup?
FAQ - B's Recorder GOLD5 - B.H.A CorporationI get a message "Under Windows NT, only users with Administrator access can make backup copies of the hard disks" when I go to back up my HD.
Related QuestionsSubject: [3-15] How do I make a bootable CD-ROM?
CD-Recordable FAQOn a Mac, this is reasonably straightforward. A CD can be bootable if it has a bootable system folder on it. Tell the recording software that you want to make the CD bootable; this usually involves clicking in a checkbox before burning the first session. Then, copy a bootable system folder onto the disc.
Related QuestionsCD-Recordable FAQ - section 3For pre-OS X systems, a CD can be bootable if it has a bootable system folder on it. Tell the recording software that you want to make the CD bootable; this usually involves clicking in a checkbox before burning the first session. Then, copy a bootable system folder onto the disc. An easy way to create an appropriate system folder is to launch the system installer, tell it you want to do a "Custom" install, choose the "Universal System" option, and then install it onto the CD source volume.Related Questions
Can UltraISO make Windows NT/2000/XP bootable CDs?
UltraISO FAQ - EZB Systems, IncAnswer: Yes. If you want to make multiple boot disc with local language menu, you need to purchase EasyBoot add-on tool. Clisk here for more details.
Related QuestionsHow do I make my hard disk bootable with FreeDOS, after installing FreeDOS?
If you have any questions, please contact the FD-DOC coordin...The short answer is to boot from the FreeDOS Install Boot Floppy. When your system comes up, just type: After that's done, remove the floppy from the A: drive, and reboot. Your system is now running FreeDOS.
Related QuestionsQuestion 22 How do I make a new root device bootable?
The mrEriksson-NetworkAnswer To make a root device bootable, you need to add the bootstrap software to it. This can be done with the installboot(8) tool (found at /usr/mdec/installboot). To install the bootstrap software on the root partition on device wd0 (wd0a) you should cd to /usr/mdec and do the following: Note that you need to add the 'r' char to the begining of the devices name to specify that installboot should work with the rad device for the given unit. That is, wd0a becomes rwd0a and so on.
Related QuestionsWhat option do I use to make the CD (or DVD) bootable?
Downloading FAQ - Knoppix Documentation WikiNone! Do not use any option in your burning software to make the CD bootable. Just burn the ISO as an image, this will put all of the proper files on the CD in the proper locations and the resulting CD will be a perfect copy of the original Knoppix CD and will be bootable. If you take any option that makes a bootable CD, you will end up with a CD that does not boot into Linux/Knoppix.
Related Questions