The Amiga stores part of the OS in a ROM and the rest on hard disk. You need to transfer both of these parts to the emulator in order to run software that uses the OS. The component held in ROM is known as Kickstart. The rest of the OS is provided on floppy disks with the Amiga, or perhaps already installed on a HD if you bought a second-hand one. Both UAE and Fellow provide the same utilities to copy the OS from an Amiga to floppy disks. The programmes provided are transdisk and transrom.

And now things can get decidedly sticky. The answer depends on the platform and the facilities you have available. There are a range of options: This is not possible on most platforms due to the fact that Amiga floppy drives contain custom hardware. This means that the drive can not be emulated in software.

A good friend of us has made an incredible utility, which enables you to read Amiga disk directly on your PC. You can get it straight from AMP's download page. All you need is to install the software and 2 disk drives. That software also works with C64, Atari ST floppies. Make sure to send the author an email and donation for his excellent work.

You can transfer files to a QEMU guest from the host with the built in TFTP server. Run QEMU as so : qemu -hda hdd.img -m 256 -tftp / Now, in you guest OS, install a TFTP client. You can connect to the QEMU TFTP server at 10.0.2.2 in the guest. Make sure you use binary mode. If you are using a GNU/Linux system, install the TFTP client and issue the following command : cd [directory you want to download files to] tftp -m binary 10.0.2.

Compress the .adf with a compressor that you can use on the Amiga. You can do this from within the emulator if you like so that you can use an Amiga compressor directly. Transfer the file to your Amiga using the reverse of the method you use to transfer files from the Amiga to the emulation platform e.g. CrossDOS. Now, working on the Amiga, decompress the .adf to RAM: or somewhere suitable. Use adf2disk to unpack the .adf to a floppy. Copy the unpacked files wherever you wish.

The OS may NOT be transferred from machine to machine. The OS lives/dies with the machine it was purchased for. Applications may be transferred from machine to machine. For example-if you have an existing machine and will be excessing it, and you have Microsoft apps installed, you may deinstall the apps on the old machine and install them to your new machine.

The Amiga computer is a desktop machine which first appeared in the eighties, produced by Commodore Business Machines. It was, and still is, noted for it's multi-tasking and graphics abilities. Due to mismanagement by Commodore, Amiga production stopped for about three years in the early nineties. The Amiga was continued by Amiga Technologies and is now owned by Gateway2000, in the guise of Amiga International.

If you have the original distribution disks, which you should if you own an Amiga, use transdisk to copy each of the disks to your HD in turn, naming them uniquely. Then use a transfer method to send the files to your destination machine. You could also use transdisk or another method to progressively transfer the contents of the Workbench partition from your hard drive to the destination machine, copy them to a directory or hard file and boot the emulator from that.

There is a filesystem available for Linux that will read Amiga HD's. See Ami-PC_FAQ for more info. There is no known support for other OS's. If you have Linux running on your emulation machine alongside another OS, you may be able to read the HD in Linux and then make the files available to the other OS on the same machine. There are plans to implement Amiga HD support in UAE to allow it to access Amiga formatted HD's directly.

Novell and Linux operating systems may be transferred from one ProLiant server to another; however, the End User License Agreement for Microsoft server operating systems states that the OS may not be transferred from one ProLiant server to another or onto any other server.

Yes. You can transfer your learning material, but you will not be able to transfer the learning process. In other words, you will need to learn your collection anew. Export your collection on Amiga as questions and answers (Q&A format). Then import it to SuperMemo for Windows with File : Tools : Import : Q&A Text. You can then use rescheduling tools to roughly approximate the state of your learning process.

The only program I know of that is capable of this feat is TrackTool (written by me! :) For various reasons, all the other programs I've seen call WB2.x functions to do the disk input/output. Tracktool can read or write an ADF from a disk but cannot handle compressed formats (as found on the now closed Lazarus). In those cases, you'll have to use UnZip or GZip to convert the compressed data back to an ADF file and then use TrackTool.

Warlock's Transfer Programme is an AmigaBASIC programme which you can use to transfer files from a real Amiga from within UAE. ADF Sender Terminal - Allows you to transfer files between an Amiga and a PC without a terminal program. Free. ADFTransfer - Replaces the terminal programme at the PC end of a serial connection and provides file-specific options. Free. Amiga Explorer - Provided by Cloanto with their Amiga Forever CD. Allows Amiga-PC serial or TCP/IP connection.

Use a null modem cable, a RJ45 cable or the software from Cloanto (Amiga Forever). That should do it. If you can afford to buy an Amiga One or Pegasos then all you'll have to do is connect your IDE/SCSI HD to the computer.

No. Miraizon only offers Cinematize 2 for Macintosh users running Mac OS X 10.2 or later (10.3 or later for Cinematize 2 Pro). We encourage you to upgrade your Macintosh to run Mac OS X. Yes. Not only will Cinematize 2 and Cinematize 2 Pro work on G4- and G5-based machines, they will operate significantly faster on machines with these processors. This is because both have been optimized to take advantage of the AltiVec vector processor included in all G4, G5, and higher processors.

Hold down channel 1 [CH EDIT] and [SELECT] buttons while powering up. The version displayed in the lower left of the display during normal operating mode only shows 3 digits (i.e. 2.01), however the actual version is 4 digits (2.013).

B4. I'm using the M-ACPA with the microphone plugged into the correct jack (the offset one). After I install DDWin it asks me to create a new user, but when I say the word "nevertheless," nothing happens. B5. The Options/Hardware menu allows me to set the M-ACPA I/O Address to 210, 230, and 260 but the manual doesn't include settings for these. B7. You say "Bring Up," then you say the application's icon name (for example, "Write"), but the application doesn't start.

The simplest method is to transfer the entire collection with File : Copy collection. If you do not edit your learning material on one of the computers (i.e. use it for learning only), you could also use File : Tools : Export : Learning process (to export your learning progress from one computer) and then File : Tools : Import : Learning process (to import it back on the other computer)

To transfer the Windowseller program you first need to transfer the data and licence information to the new machine. Please refer to the following How To's in the Windowseller Help file for detailed procedure:

install the software on the new machine from your PerfectTablePlan CD (if you have one) or our download page transfer your licence key to the new machine, either by forwarding the original licence key email or emailing/printing the licence key from the Licence window on the original machine (select Licencing|Licence from the main menu) and re-entering it in the Licence window of the new machine

From the PASS program (on the computer that you want to transfer the program onto) write down the software keys (for each of the four modules) from the licence status screen of that computer. Go onto the original machine and press transfer for each module in turn (on the licence status screen of that computer) and type in the software key numbers that you have written down from the other computer.

As explained above through a S-Video / Composite video cable or directly from USG machine through DICOM software provided with SonoCare version (with DICOM option)

Then you select "Transfer License from Floppy" on the new machine. It will write some stuff to a floppy disk. Then you take the floppy disk to the old computer, run PaqRat, and select "Transfer License to Floppy". This will do some sort of encoding on the disk. Then you take the floppy disk back to the new computer, run PaqRat again and select "Transfer License from Floppy" again. This will read the code from the disk and set your site key automatically.

Yes. If we have you listed as a primary user for your organization and you are handing off the responsibility of scheduling to someone else, please fill out a registration transfer form online or give us a call to inform us of the details. This helps us track each user for customer support reasons. It also keeps your organization's license legal.

benchmarks) ?'? XXX??????/YYY?"????????????"???????????????????????????????????? When the BOINC client is first run on a machine, it does some testing to determine how fast that machine does floating point and integer mathematical operations. Some versions of the BOINC client do not make this determination very accurately, either over- or under-reporting the performance of the machine.

On most machines, use the following command: uname -a -------------------------------------------------------------------------------