No, however the application of 2 to 3 three coats of a floor sealer will give the floor a high gloss appearance and make cleaning slightly easier in the long term. For information on our recommended sealers and polishes please click here. [top]

Quite simply because Ecotile offers the best value for money of any flooring product currently on the market. Customers often question this claim as in simple terms the cost of the tiles is usually higher than conventional vinyl flooring or paints and resins. To justify our claim we ask you to consider the following points: EcoTile is 6.5mm + thick compared to most vinyl or resin based systems that are 1.

When the vinyl is firmly adhered to the floor and all contaminants and waxes have been stripped from the floor. If the vinyl is “cushioned,” it should be removed. Bear in mind that some older vinyl may contain asbestos, which can be dangerous if inhaled. In unsure, contact a professional.

We generally recommend that the underlayment be removed because the subfloor may mot be adequate to support tile; however if your existing vinyl floor was installed over an adequate subfloor using a full spread installation method then yes, it can be done if you use the proper installation products.

Vinyl siding or new aluminum may be painted with a 100% acrylic finish without priming, as long as the surface is clean and dry. Weathered aluminum needs to be cleaned and then primed with an oil based primer before applying the acrylic topcoat. When painting vinyl siding, be sure that the color chosen is a shade no darker than the original color because dark colors absorb heat from the sun and may cause warping or buckling.

The floor sink must be accessible for cleaning, but you should speak to your local plumbing inspector for height requirements above the finished floor to ensure it is installed in accordance with the Uniform Plumbing Code. Check with the Uniform Plumbing Code and your local building department for specific rules and regulations.

Ecotile is extremely tough and hardwearing. It is a vinyl product so it will compress under heavy loads but will always return to its original shape. Please consult our sales team to identify which product would be most suitable for your application. [top]

Yes, our highly trained Floorguard® installers will remove the paint using heavy duty machinery, and then apply the Floorguard® floor system.

No paint must be removed off of a concrete floor before tile can be applied. Removal of Paint can be done by scraping it or a shot blaster machine.

Yes. Use "Metroflor Matte" to finish TrafficMaster vinyl floors to increase brightness, but when using, cover the entire area. Use "Tile Lab Hi-Gloss" to finish Newport, Riviera, and Images floors to increase brightness, but when using, cover the entire area.

Vinyl flooring and vinyl tile surfaces should not be painted. The composition of these surfaces prevents proper adhesion of paints. Direct impact, abrasion from foot traffic as well as flexing of the floor can result. Factors such as actual temperatures, humidity levels and even air movement all contribute to the drying of an alkyd resin. In addition, the thickness of the newly applied coat and the porosity of the surface will also impact the time needed for an oil-base product to set up.

Answer: No. In the vinyl manufacturing process, the color is permeated into the vinyl, not applied like paint. (Permeated means manufactured with the color blended into the product). This manufacturing process assures the color will not crack, peel or flake off. Second Look has exclusive contracts for certain colors of vinyl from the top manufacturers.

If your original vinyl floor was installed using a full spread adhesive method, then you can apply an embossing leveler to the original vinyl to smooth it out and then install the new vinyl.

Basically, our fences are installed just like wood fences. Most components are precut and routed from the factory. First, posts are secured to the ground with concrete footings. Then rails are inserted into posts and finally pickets into rails. A properly installed fence is a strong, durable, lifetime fence. If you want to get a jump on the project or just get an idea of what's involved in installing vinyl fence feel free to look at the following links.

Yes, vinyl is very appropriate for basement use, but like all other flooring types, check to make sure you do not have a moisture problem before you install it.

Just about anywhere you want! The vinyl material has an adhesive backing that allows it to be installed on many different types of materials. The most common applications are on painted walls (light and medium texture work fine), glass, metal, wood, furniture, ceramic tile, porcelain; almost any smooth hard surface, etc. Please note that you should wait at least 3 weeks for new paint to dry and cure before applying.

Vinyl Letters are very easy to install. Almost as you would put down a bumper sticker. Complete instructions are provided with each order. Also, see our Letter Application and Removal web page for instructions.

Yes, we can usually sand out 99% of the white paint. An extra charge is made to cover the extra work (usually £4.00 per square meter). The floor is in a very poor condition with many repairs. Can it be restored? Yes, most floors can be restored. This is our main business. Do you fix down loose floorboards? Yes, we allow for fixing down loose floorboards in the price. We use reall floorboard nails, in the traditional way.

Wipe up spills immediately to help prevent stains. The longer a stain sits, the tougher it will be to remove from the surface. Follow the instructions on the bottle and do not over-mix or your cleaning solution may leave a dulling film. Avoid soaps, cleaning powders and detergent products as they will leave a dulling film. Although the no-rinse cleaners do not need rinsing, rinsing will provide a better shine.

The Basement De-Watering System® is the ideal solution for carpeted basements. If the carpet has not been destroyed by years of water damage, enough of it can be moved or removed to provide clearance for the Basement De-Watering System®. Some carpets must be trimmed and replaced after the installation. If vinyl flooring has survived past seepage, it will be trimmed about 2 1/2" from the wall before the Basement De-Watering System® is installed.

We recommend using a non-rinsing cleaner that leaves no film. We suggest that you vacuum, sweep or dust mop more frequently. Wipe up food or other spills immediately using a non-abrasive cleaner and a soft cloth. You should NEVER USE ABRASIVE CLEANERS, POWDERS, OIL CLEANERS, WAXES OR DISH DETERGENT; this will scratch the surface or leave a film.

You can use primer to prepare a sub-floor for vinyl tile. It aids in preparing the floor for the adhesive. We recommend Jasco Primer. NEVER USE A SEALER! TrafficMaster Pro Basement Proofer is a type of primer that acts like a sealer, but allows adhesion of the tile to concrete floors. Most importantly, it helps prevent moisture from getting between tiles and the sub-floor.

Concrete Floors must not contain a sealer or finish of any kind. For installing below grade (below floor level, like in basements), we recommend Basement Proofer to prepare concrete floors. First, clean the sub-floor for any remaining dirt and grease. Tiles must be in the room of installation for at least 2 days to stabilize temperature. Never use polyurethane over vinyl tile.

You can buy direct from us by calling 0870 7772795 (from outside the UK +44 1707 7772795), we accept most major credit cards or for trade customers we can set up an account subject to a quick and simple credit check. [top] Ecotile Industrial Flooring | Suregrip | Lockmat | Chequerplate | Suregrate | Ergomat | Contact | Sitemap | Links

Tarkett FiberFloor may be installed using the Glueless or Full Spread Installation Systems. See the Tarkett FiberFloor Installation Manual for more information.

We recommend the F.G. 1000 floor cleaner, which is specially formulated to clean your Floorguard® floor system, without causing any damage or dulling.

We offer a glass tile that meets ANSI and ATSM standards for residential and commercial wall and floor applications. The artwork is infused on the underside of these tiles which protects against wear and abrasion. These tiles are recommended for floors, walls, and swimming pools, and have a textured surface.

Yes. However, tile will not bond directly to a wood floor. We recommend the following methods to prepare your wood floor for tile installation: Install Schluter Ditra, from Schluter Systems, with a latex thinset. Then install the tile using a non-latex thinset.

Yes and no. Is the vinyl flooring is tightly secured to the subfloor? Does the vinyl flooring have a thick cushion attached? If the vinyl floor is thin and well secured to the subfloor you may be able to float a wood floor over it. In some situations you may be able nail/staple a wood floor over it also. If the wood subfloor is sound you may be able to nail a solid wood floor over the top.