Search 5,000,000+ questions and answers.

Frequently Asked Questions

Can I buy a PC without a monitor, or without Windows?

Frequently Asked Questions
Yes, you can. If you already have a licence for Windows you do not need to buy a copy from us. (Note: If your existing copy is an OEM copy then it is not legal to use it on any PC other than the one it was supplied with). If you already have a copy of Windows we do the installation on your new PC free of charge to save you the trouble of installing the operating system and drivers. You can also buy a PC without a monitor.
Related Questions

Can I damage the monitor or PC when I connect a workstation monitor to PC ?

ePanorama.net - Circuits
It is possible to damage equipments when playing with PC vidoe hardware and workstation monitorts. If the monitor has standard video inputs, is workign properly, cable is properly constructed and everything is connected to properly grounded power outlet then the risk of damaging the graphics card is minimal. Some monitors can be damaged by sending wrong frequencies to them, so be sure that you send right frequencies to monitor.
Related Questions

When can I buy Windows Me?

ActiveWin: Frequently Asked Questions - Windows Millennium E...
You can buy Windows Me from September 14th. MSDN users will receive their copies on CD in July while new PC buyers can expect to see Windows Me on PC's late July.
Related Questions

What are the typical scanrates for typical PC monitor ?

ePanorama.net - Circuits
Typical Horizontal sync ranges for PC monitors (Consult your monitor manual for more accurate details): 31.5 - 31.5 kHz (Standard VGA monitor, 640x480 @ 60 Hz) 31.5 - 35.1 kHz (Old SVGA monitor, 800x600 @ 56 Hz) 31.5 - 35.5 kHz (Low-end SVGA, 8514, 1024x768 @ 43 Hz interlaced) 31.5 - 37.9 kHz (SVGA monitor, 800x600 @ 60 Hz, 640x480 @ 72 Hz) 31.5 - 48.3 kHz (SVGA non-interlaced, 800x600 @ 72 Hz, 1024x768 @ 60 Hz) 31.5 - 56.0 kHz (high frequency, 1024x768 @ 70 Hz) 31.5 - 57.
Related Questions

Is old workstation monitor a practical PC display ?

ePanorama.net - Circuits
Typical old workstation monitors are not very practical PC display device because their limitations in supported scree modes. Typically it is possible to have one particular Microsoft Windows or X-windows (for Linux and Unix users) screen mode to work with that monitor, but there are many screen modes which the workstation monitor does not show.
Related Questions

I want to monitor my childs PC from my home office, do I need to buy two copies?

In Loco Parentis - Frequently asked questions
No, you only need to purchase a copy for each computer you want to monitor. The computer being monitored can send you logs and alerts via email, or you can phyiscally go to your childs PC and view the detailed reports.
Related Questions

How to optimally buy Windows and Pocket PC upgrades?

FAQ: Shopping for SuperMemo
Yes. All upgrades are subject to substantial discounts. In this particular case, upgrades to SuperMemo 2004 are 60% cheaper for repeat customers and upgrades to SuperMemo 3 for Pocket PC are 50% cheaper. If you happen to add Pocket PC version to your SuperMemo 2004 Upgrade, you will additionally receive a cross-sale discount. Your checkout price is $27, and your actual charge is $21 (after applying the post-purchase PPC discount).
Related Questions

Can I display Abaqus CAE on my Windows PC?

FAQS for CSM Software
Yes. However, Exceed 6.2 or 7.1 or newer with Exceed 3D must be installed on your PC. Exceed is a X-server package for Windows. Exceed 3D extends the X-server with the remote GL library. Remote GL allows hardware support on the local PC box. Abaqus CAE has not been certified with other freeware X-servers for Windows like CYGWIN though you can try to download and use them on your own. Abaqus CAE should be displayed fine on all UNIX workstations, including Linux with remote GL support like Red Hat
Related Questions

How do I get files to or from my S-100 system to my [Mac, PC/Windows, Linux] system?

S-100 FAQ
Sooner or later, most people who own an S-100 system need to transfer a file to or from a DOS or Windows (or Macintosh or whatever) computer. A Google search of comp.os.cpm "groups" will find a discussion of this very topic that last occurred in early 2003. It's an old topic. Most people who need to establish serial file transfers to or from a CP/M system (or N* DOS system) of ANY sort end up doing something like this: get a SIMPLE file transfer program onto their CP/M system.
Related Questions

How do I move files from my old Mac to my Windows PC?

Herb's Mac Stuff FAQ
IOMega ZIP drives and ZIP disks may offer you a way to move megabyte-sized files from old Macs to new Macs, or from your Mac to a Windows/Pentium PC. Check my Web page for Mac hard drives, the ZIP drive section via this link for the ZIP drives I offer. I have drives for old Mac internal or external use, and for Windows systems too. For a bit more discussion, check the discussion above on recovering files from drives.
Related Questions

How can I display Xterms, SPSS windows, etc, on my PC?

The umich.umce.login FAQ List
First, you will have to get an X-Windows server set up on your PC. Many people are using Xceed for Windows, or MacX for the Macintosh to do this. Next, you will have to set your DISPLAY variable as above, to your desktop PC. The command should look something like this: This command should have your machine's name, or IP number in it before the colon (:).
Related Questions

How can I buy Monitor one?

Frequently Asked Questions | FineConnection.com
You can buy Monitor one by credit card, by fax, by phone or by requesting an offer, sending your formal purchase order and pay by wire transfer.
Related Questions

Where can I find drivers for my pc, monitor.. ?

Customer Support -- FAQ
Stolen Units - I have had Service request, what do I do? If you suspect the Unit has been stolen please contact the Service Department at Tatung (UK) Limited. Please contact us at info@servicebridge.co.uk
Related Questions

Can I use a PC monitor?

The Macintosh IIci Site
Any PC monitor manufactured within the past 8-10 years is likely to be multisync, which the Mac IIci cannot drive. PC monitors also use a different 15-pin connector, making it incompatible with the IIci. However, there are adapters which will overcome both limitations. Griffin Technology, among other companies, sells these adapters.
Related Questions

Is the upgrade the same as if I buy a new iPAQ Pocket PC with MS Windows Mobile Version 5.0?

Small & Medium Enterprises
the time of launch of the Microsoft Windows Mobile 5.0 Operating system, many of the accessories and software do work with the new operating system. If you experience any difficulty with a third party software or accessory, check the third partyâ??s website for a driver update.
Related Questions

Can I display Ansys GUI on my local Windows NT/PC?

FAQS for CSM Software
Yes. However, Exceed 6.2 or 7.1 or newer must be installed on your NT/PC box. Exceed is a X-server package for Windows. Ansys GUI has not been certified with other X-server software packages on Windows. However, it should work with all UNIX workstations, including Linux.
Related Questions

Will the application work on a Windows PC?

Cornell University Travel Reimbursement System: Technical FA...
We have successfully tested the Travel Reimbursement application on all current Windows operating systems. However, we do not recommend that you run the application on Windows 95 or 98SE. Both of these operating systems are already or will be discontinued, and we will no longer support them.
Related Questions

When will I be able to watch TV on my Windows 98 based PC?

ActiveWindows -- Frequently Asked Questions - Windows 98 and...
As soon as you install a compatible TV tuner card and hook up an antenna or cable TV. Web TV® for Windows and TV Viewer are included in Windows 98, as is Program Guide, which you can use to find out when programs are on and set reminders to tune in. Windows 98 lets you watch TV full screen, in a window, or on a second monitor as you work in another application.
Related Questions

Why shouldn’t I just wait to buy a PC when Windows Vista is released?

Newegg.com - Windows Vista FAQs, Microsoft Vista Frequently ...
If you can have the added functionality of a new PC and genuine Windows XP now andupgrade to Windows Vista when it is released, why wait? If you purchase Windows XP Professional, Windows XP Media Center Edition, or Windows XP Tablet PC Edition, you pay only a nominal cost, including shipping and handling, for the upgrade.
Related Questions

That can I do for that this PC[s run X-Windows ???

Small_Linux: Less FAQ
From: FTP Mirroring Count <mirror@tux.org> To: smalllinux@superant.com cc: David C Niemi <niemi@gwyn.tux.org> Subject: ftp.tux.org is mirroring smalllinux We are mirroring daily ftp://209.75.231.175 /pub/smalllinux and /pub/tinyX Our copies can be found at: ftp://ftp.tux.org/pub/distributions/tinylinux/smalllinux ftp://ftp.tux.org/pub/distributions/tinylinux/tinyX http://www.tux.org/pub/distributions/tinylinux/smalllinux http://www.tux.
Related Questions

The videos stall or stutter on my Windows PC. How do I fix it?

Frequently Asked Questions | MyPathTV
Increasing video performance in Windows Media Player requires changing the buffer settings. To change the buffer setting, follow these steps: In the Network Buffering section, click Buffer, and then type 30 in the text box. (60 seconds is the maximum.) This setting may improve playback. However, when you increase the buffer time, the system must wait while the player fills the buffer before it starts to play streaming media.
Related Questions

How can I read 800K Mac disks on my new Mac? or my Windows-based PC?

Herb's Mac Stuff FAQ
PLEASE READ THIS PARAGRAPH TWICE. NO USB external floppy drive will support Apple 400K or 800K diskettes. Period. Also, there are NO EXTERNAL SCSI-BASED floppy drives to speak of, today. Period. And Apple's older external floppy drives for 400K, 800K and 1.4Mb are intended for use ONLY with Apple Macs which already have an INTERNAL floppy drive. Period. Mac 400K and 800K diskettes are written in a unique fashion, no standard IBM-type floppy disk controller card in a PC can read them.
Related Questions

How do I keep Windows up to date on my PC?

Information Governance | Information Services Division | Uni...
Windows Update is the online extension of Windows that helps you keep you PC secure and up to date. Use it to download and install updates to your computer's operating system and the driver software that controls your PC's hardware. It is important to install updates as soon as possible if they are designed to plug Windows vulnerabilities. To set up Automatic Updates, start by right clicking My Computer icon. Select Properties then select the Automatic Updates tab.
Related Questions

What if I don't use a Windows PC?

Online Machine Shop - General FAQ
We can only suggest to get some time on a friend's or co-worker's Windows PC, buy a low-cost PC, use a PC at a web cafe like Kinko's or a library, or run a PC emulator.
Related Questions

How do I install Wings3D on a Windows PC?

Wings FAQ - Installation
First you must download and install the R9B release of Erlang/OTP on your computer before you can install Wings3d. Then install Wings3d into the directory of your choice. The installation must happen in this order for Wings3D to work.
Related Questions

How do I print from Windows Handheld PC?

Pentax Imaging - Explore Technology Products
Pentax provides a driver for Windows CE and Windows CE.NET Handheld PC devices. This driver can be found on the driver CD as well as here in this web site. Connection can be made with the IrDA of the printer. Make sure the correct printer and port are selected. Make sure the IrDA ports are aligned. Make sure the WinCE Handheld PC is not connected to a PC. Try resetting the Win CE Handheld PC according to the Manufacturer's directions. This is normal.
Related Questions

Do I need Windows on my PC?

ASBA - CP Editor
Yes, Microsoft Windows 98 and later is required to run the ASBA CPE correctly, as well as MS Word 98+
Related Questions

Mac with no access to Windows PC, what can I do?

Focus Enhancements
The latest FireStore firmware incorporates fresh disk Partitioning with default cluster size FAT32 formatting. If you have version 1.x visit our web site at http://www.focusinfo.com/products/firestore/upgrade2.htm for upgrade information. If you have version 2.0 and need to obtain the latest version, call 1-408-370-9963 to make these arrangements.
Related Questions

Got A Question? Ask Our Community!


More Questions >>

© Copyright 2007-2008 QueryCAT
About • Webmasters • Contact