Yes. However there are necessary steps that must be taken first in order to assure success. Excellent preparation will be needed to make this change.

Limewashes represent the best of both form and function. They're beautiful and breathable, making them the perfect choice for both historic and new buildings. Unlike typical modern paints, they don't trap water and they age beautifully--instead of getting shabby, they develop a lovely mellow patina over time.

In the satin and gloss finishes which are commonly used on woodwork, oil enamels traditionally exhibited a richness, touch and leveling ability which was unmatched by waterborne paints. However, with the introduction of Eco, many professional painters and designers believe they have discovered an odorless, waterborne alkyd, which can be used interchangeably with traditional Hollandlac oil enamels.

Traditionally, latex finishes cannot be applied to an alkyd enamel without proper surface preparation which includes sanding, cleaning, and priming. However Porter's ADVANTAGE 900 Interior/Exterior Acrylic Enamel, with its new age acrylic resin, may be applied directly to clean alkyd enamel surfaces.

acrylic topcoats are typically the best due to color retention properties and flexibility. It is important, however, to use an oil based primer before using the acrylic topcoat when painting over bleeding woods like Redwood or Cedar. A complete acrylic system may be used on all other non-bleeding woods.

Latex paint is a great choice for most instances, but there are still situations where a solvent-based paint may be preferable. To help decide which is best in your case, consider the following:

Yes, but you must make sure you clean it extremely well. It’s best if you just buy two sets of brushes, one for latex and one for oil-based paints. Natural bristles work well only with oil-based paints.

If the surface may have been coated prior to 1978, please consider the following lead hazard cautionary statement: WARNING! Removing or disturbing old paint from interior or exterior surfaces by sanding, scraping, abrading, or other means may produce dust, debris, or fumes that contain lead. Exposure to lead dust, debris or fumes may cause brain damage or other adverse health effects, especially in children and pregnant women.

Oil-based and acrylic paints cannot be mixed. Acrylic paints are water-based. There is a new type of paint out now, called alkyd paint. Although it is water-based, alkyd paint can be used with oil paints. You can never paint in acrylic over a painting previously done in oil paint. You can, however, paint with oil paint over an acrylic painting.

Latex paint cannot tolerate a freeze without some negative consequence. In many cases, it may not be noticeable in the can or during application; however, long-term durability will suffer relative to how hard the paint freezes. Oil paint, in most cases, can take almost any temperature. There are some formulations that can 'shock' if exposed to extreme cold. A paint that has been 'shocked' will have the different ingredients (oil, resin, pigment, solvent and additives) separate.

This depends on the siding and the look you are trying to achieve. For most homes, using a 100% acrylic (latex) paint will provide the longest lasting finish. 100% acrylics tolerate more movement in the wood and retain their color much longer than an oil based paint.

Water-based emulsion acrylics belong to a larger group called latex. Most people however are referring to latex house paint when using the term latex. The binder and pigment qualities in these paints are not artists’ quality. House paint quality latex becomes brittle with age and is therefore not recommended for use under artists’ acrylics.

Different raw materials yield different grades of paint. Kirker manufactures three grades of paint, suitable for different automotive refinish applications. See the chart below for specific differences in the performance expectations of each Acrylic Urethane (ULTRA-GLO) features the most modern coatings technology, which gives it excellent durability, gloss retention and color holdout. ACRYL-GLO Acrylic Enamel is a traditional coating, most often used on passenger cars and commercial vehicles.

ACRYLIC. A 100% Acryllic Latex paint fortified with urethane will provide a sealed system that swells and contracts with the wood as the seasons pass, avoiding unsightly cracks and blistering. The fact that Acrylic based paints can shed water and breathe enhance their longevity. This will offer you the optimal protection. all-acrylic latex top-coat paints, applied in two coats over a stain-blocking acrylic latex primer, last longer than other paint systems, even on difficult-to-paint surfaces.

TOil based paints have been al but phased out. The exception being for industrial uses as well as some exterior rust inhibitors. Unless you can provide us with a sufficient amount of fresh oil base paint we will be using all latex paints as of the beginning of this year. The paint manufacturers have done a great job of solving the problems attributed with early latex paints.

Currently, there is no recycling outlet for oil-based paint. Residents can dry it out with kitty litter or sawdust and throw it away with their regular garbage.

There is an increasing exodus from many of the oil products, but ask 10 people and you may get 10 different answers. Review our short article titled "Do I Choose Oil Or Latex Paint"

It is a water-based paint. Therefore soluble in water, so you can clean brushes in water and there is no odour. It is a thinner paint than household emulsions and can be applied delicately without clogging or looking heavy. It is like using watercolours to paint on the wall rather than trying to paint a picture with poly filler!

Linseed oil paint will actually never fade. Earth pigments are used in linseed oil paint. The linseed paint will dry out over time and may look faded. This is because wood will absorb the oil into the grain leaving the pigment to dry out. This is very easily and inexpensively corrected by applying the cleaned boiled linseed oil or the linseed oil wax every 5-10 years.

These paints have resins and thinners in them that evaporate when the paint dries. This process forms a hard coating and provides heavier coverage on the first coat, effective penetration and excellent adhesion. They are particularly good for chalky surfaces and those that already have several layers of oil-based paint.

The secret to getting anti-fouling paint to adhere to your trim tabs is proper priming, and the best people to tell you what to do are the experts at the company that makes your anti-fouling paint. We strongly suggest that you contact the paint manufacturer and tell them you are painting "304 stainless steel" trim tabs, then follow their recommendations to the letter! Remember don't paint under the zincs.

If the old paint is peeling, take a good size piece of the peeling paint and hold the edges of it between your thumb and index finger. Exert pressure on both sides of the chip. If it is very flexible and bends easily, it is probably latex. If it is hard, brittle and breaks instead of bending, it is most likely oil-based paint. Another way to test the paint is to wet a rag with denatured alcohol and rub the surface of the paint. If the paint softens or rubs off, it is most likely latex.

Latex paint is not considered hazardous waste and, after hardening, should be put in your trash. Paint hardener, good for about 3 gallons of paint, is available at minimal cost from Lynch Paint near the Main Westford Post Office on Littleton Road (Route 110). Kitty litter also works as an absorber hardener but is not quite as effective.

For most applications on interior walls, a latex paint will offer many advantages over alkyd paint. In most available products you will receive better color retention and the finish will be non-yellowing. Additionally, the latex products will have a lower odor, dry faster, and you will be able to clean up with soap and water.