In most cases, this is not necessary. Generally, one surface can be primed and adhesive applied either to the primed or unprimed surface. Situations requiring priming of both surfaces generally arise when very rapid cure times are desired or when bond line gaps of .015 or more exist. When using a primer, typically less is best.

A prime is a sequence of six consecutive blocks. When a prime is in place, none of the opponent's checkers can move past as long as the prime remains intact. That's because a checker can't touch down on a blocked point and never moves more than six points in a single hop. In the following example, Red has constructed a prime on his side of the board and trapped White's outermost checker.

Any water soluble surface that has relatively good absorbancy. I love to experiment with different types of papers, so I usually bounce between d'Arches and Fabriano. I use a variety of different thicknesses which could range between a 140lb to a 300lb. I've found that gouache works best on a hot pressed 300lb sheet because of it's absorbancy and for smoother gradations of color that you'd have a hard time getting with a cold pressed surface.

All insulin injection devices must be primed to secure that the correct amount of insulin is delivered.

When the CTV-1500 does not hold prime, it is usually because of air leaking into the inlet water stream. Check to be sure the in-line sediment filter cover is on tight and sealed. Next, check for damaged or missing o-rings at the connection points between wand sections and tools. Make sure you thoroughly understand the priming sequence as described in the Operating & Maintenance Manual. Another potential cause for loss of prime is a low water level in the basin.

The prime contractor must submit the Final D/ESBE Report (pdf 11k) and/or the Final SBE Report (pdf 11k) to the Division of Civil Rights and Affirmative Action at the completion of the project. The report(s) identify the name of the contractor, the project and the date of the award, the dollar amount of the contract, the goal (s) and their attainment.

When the results of a General Election are known the Queen invites the leader of the party winning the most seats in the House of Commons to become Prime Minister and to form a Government. The Prime Minister is the leader of the Government and has a home and offices at 10 Downing Street. S/He must be a member of either the House of Commons or the House of Lords. The current Prime Minister is the Rt. Hon. Tony Blair MP.

The ÔPrimeÕ rate referred to in the said Promissory Note is the BankÕs rate for 90 day loans to substantial borrowers from time to time in effectÐany change in such Prime rate to take effect at the opening of business on the day specified in the public announcement of a change in such Prime Rate.

Prime time is yet another way of limiting the amount of traffic on RELAY and the network itself. During the day, the computers of many colleges and universities are severely loaded down by jobs not related to the network in any way. These machines do stay linked to the network and process many files intended for research projects and correspondence.

In December 2004, New York State signed a contract with M/A-COM, Inc. as the prime contractor to design, construct and maintain SWN. The infrastructure will be operated by M/A-COM and administered by the state Office for Technology.

A Power Prime is a core team of five Superdudes, one from each Katra. Seek out and join forces with fellow Superdudes to complete your Power Prime. Remember the Power Prime must have one hero from each Katra. Once your core team is complete, you're ready for Superdude missions!

Generic Prime is the same pellet as branded prime, but without the producer certification. It is surplus Prime resin that producers wish to sell, but quietly without disrupting their current sales channels.

AKA Downgraded prime, or Prime No Certs. This is resin Prime quality that does not come with producer certs. Not for ultra critical applications, but more for commodity applications that require prime resin quality at a discounted price and do not need a specific brand.

Prime Households are households within a given territory that are considered by us to be a desirable recipient of Valpak® Envelopes, based on reported household income and other criteria. Prime Households are chosen on a range of total households. Currently, the range is determined by subtracting the top 5% and the bottom 15% of household incomes.

Meridian of longitude 0 degrees, used as the origin for measurements of longitude. The meridian of Greenwich, England, is the internationally accepted prime meridian on most charts. However, local or national prime meridians are occasionally used.

A Prime Share is your membership account. It works just like a regular savings account and earns the same interest as other Unitus savings accounts. A $5 deposit opens your Prime Share, entitling you to all the benefits of membership--just as long as a $5 balance remains in your account.

The prime rate is a fluctuating rate of interest determined by an individual bank to be its "prime rate". The Wall Street Journal's published prime rate is often used as the index in a variable credit line.

We recommend that you prime your surfaces as it ensures the best possible adhesion for our products. It's especially important to prime porous and highly glossy surfaces. Sophisticated Finishes produces two primers, Primer & Clear Sealer and Rustable Metal Primer. If you are surfacing a rustable metal (unless you are using Rust Antiquing Solution directly on the raw metal), you should prime your surface with Rustable Metal Primer.

Simple Solution can be used on all surfaces where you can safely apply water. Leather, wool, unsealed wood, and dry clean only fabrics are surfaces we do not recommend using Simple Solution because of its water base. You can use Simple Solution after treating a problem area with other cleaning products.

Although staph can live on surfaces for days to weeks, it doesn’t mean that it will make a person sick. Staph has to get off the surface and onto someone’s skin, where the organism may or may not survive due to the presence of competing organisms. Even if it survives on someone’s skin, it may simply live on the skin and not cause an infection. In order to cause an infection there has to be a break in the integrity of the skin.

Usually, normal washing with a hose is all that is needed. For stubborn stains, a brush with laundrydetergent is all that is needed.

DECORATIVE CONCRETE products can be applied to any concrete surface, vertical or horizontal. Wood surfaces must have a cement backer board such as Hardi-Board- or DuRock- applied to add stability and minimize flexing.

The substrates that tactiles can be installed onto are ceramic tile, vitrified tile, glass, granite, travitine, steel, brick, concrete, screed, epoxy, limestone, sandstone, paver, slate tile, timber, carpet, parquetry, vitrified porcelain, carpet tiles, vinyl and masonry.