If you are sure you are not using another program on your computer that listens on port 110, such as an antivirus program that checks your email for viruses, then you may be able to get away with a very quick change to K9 to get Eudora working. If this is the case, open K9 and go to the Configuration tab. In the Proxy section change the default port number in the Listen on port... area from 9999 to 110.

The range that TCP provides for port numbers is 1 to 65,535, but to avoid conflicts, it's probably better to choose something in the range of 5,000 to 45,000. Some ISPs place speed limits on certain port numbers, particularly well-known port numbers. By using a different port number, you can sometimes avoid these speed limits.

Note, please don't change the SMTP port if you are permanently connected and are running the email server for a whole domain as other email servers won't know you've changed the port number, and your incoming mail won't work. Tip: You can double the XML file which will on most systems open the XML file in Internet Explorer and then choose View-Source from the menu to open the file in notepad.

The list of registered port assignments can be found in STD 2 or RFC 1700. Choose one that isn't already registered, and isn't in /etc/services on your system. It is also a good idea to let users customize the port number in case of conflicts with other un-registered port numbers in other servers. The best way of doing this is hardcoding a service name, and using getservbyname() to lookup the actual port number.

In Exchange server 2000 go to System Manager -> Select Servers (look for your Server) -> selectProtocols / Select "Default SMTP Server" and choose 'Properties >General >Advanced> now you should be able to editor change the port number; Usually, I use 24 or 8025. Whatever you choose, it must correspont to the port Xwall uses to send to your exchange server. You have to edit the registry. Here is Microsofts FAQ on how to do it. .http://support.microsoft.com/default.

To change the server's port, you have to stop the server first. You can change it at the server configuration. Just enter the new port. This change will take effect right after you press "OK".

Locate the configuration file "Eudora.ini", which is typically located in "C:Program FilesQualCommEudora" or "C:Documents and Settings[username]]QualCommEudora".

Yes. Version 1.x used port 30729. Version 2.0 introduced a new, more efficient network protocol and therefore changed the port number to port 6942, easily memorable with the help of advanced hypermathematics: "Six times nine is forty-two". The range of 6942-6951 will be used to allow for fast user switching and port conflicts.

By default, email sent with System.Web.Mail is formatted as plain text. To format as Html, set the MailMessage.BodyFormat property to MailFormat.Html. C# ] MailMessage mail = new MailMessage(); mail.To = "me@mycompany.com"; mail.From = "you@yourcompany.com"; mail.Subject = "this is a test email."; mail.BodyFormat = MailFormat.Html; mail.Body = "this is my test email body.<br><b>this part is in bold</b>"; SmtpMail.SmtpServer = "localhost"; //your real server goes here SmtpMail.

Yes. VNC Server for Windows Configuration allows the port numbers for VNC connections and for serving the Java Viewer to be configured. See the Connections Options section of the appropriate documentation. In Unix, you can specify it on the Xvnc or vncserver command-line.

The trick is to add the port number after the server name with a colon. For a standard configuration the server name would therefore be 127.0.0.1:9999 and you'd change your username as described elsewhere in the K9 documentation.

Use the port number field to specify what port to use to establish a connection with the mail server. The default port number for most SMTP/ESMTP mail servers is port 25, or 465 for servers that require SSL. By default, Total Access Emailer is configured with the default port number (25 or 465, depending on the connection type). If your mail server uses a different port number, change the value in Total Access Emailer to match your mail server.

You need to have an active mobile number, under your own name, with any carrier that's not prepaid in order to successfully port your number to Helio. Just provide us with your carrier name, account number, and mobile number in your credit process form (which we will email you after you purchase the phone). Once the number is ported, your previous phone will not work, so be aware of that when you do port your number. It takes anywhere from 2 to 48 hours for the porting process to be complete.

Yes, IF your number's prefix is from one of the following Arkansas counties: Crittenden, Faulkner, Lonoke, Pulaski or Saline. You can only port your local wireless number. You cannot port your phone.

Yes. You can change the POP3 listening port number to any available port number, but be sure, the listening port number must be the same as the Incoming mail server (POP3) on your email client.

Under the "Special" menu in Eudora, select "Settings..." (the first time you run Eudora this box will pop up). Select "Personal Information" from the left side of the box. All you need to enter is your POP account (in the form "user@host.server.end") If you do not know this, ask your system administrator. Also enter your return address (might even be the same). You are up and running. Ask your system administrator if there is anything else you need to add).

It is very simple. JAVA WEB SERVER comes with remote Web administration tool. You can access this with a web browser. Administration tool is located on port 9090 on your web server. To change port address for web server: more articles ejb3 java6 javafx jsf spring struts hibernate ajax groovy seam weblogic jca webservice eclipse j2me gwt guice java5 apache xml tapestry

To change the port number that a K2 Administration Server runs on, modify the following lines of the following files, changing the value of the port number from its default of 9950 (in bold below) to the number you want. NOTE: In verity.cfg, if you are changing a local Admin Server port, change the lower ([Admin Server]) entry only, and only on the host for that Admin Server.

Complete the porting form by downloading it and return it with a copy of your most recent eircom bill

On receipt of the handset, contact Three on 08707 330 333 quoting your temporary number, existing number and PAC. Your existing number will then be ported within 5 to 7 working days.

Under Windows 98 and Me the default LPT port number assigned to the SPP-100 by Windows must be used. To change the LPT port number under Windows 2000/XP, follow the directions below. Double click on the device group Ports (the Quatech SPP-100 device name should appear in the list of adapters) The resources tab will also provide several predefined Basic Configuration from which you can select.

If you already have a server such as Tomcat running on this port, you need to install the GenePattern server on a different port to avoid conflicts. When you install the GenePattern Desktop Client, you must specify the the port on which the GenePattern server is installed; by default, the installer selects port 8080.

The default port of WebCam is 80, and that of the RemoteView server is 8080, 8081, and 9999. Users can modify these default settings to meet their needs. «top»­­­

You can change the default port (8080) of Zoho VO to any of your preferred port number during its installation. While installing Zoho VO, it would provide you an option to assign port number for Zoho VO, if you don't assign any of your choice then the default port number 8080 will be taken. While assigning your preferred port number, you will have to use only non-standard ports like 8080, 8081, 8888, etc.