What are the tightest grout joints I can get with natural stone tiles?
Frequently Asked QuestionsThat will usually depend on the tile. Marble, granite and limestone tiles are usually cut from blocks and then turned into tiles on a tile saw. If produced by a good tile factory, these tiles will have a size variance that will allow for a 1/16" grout joint. Imported slate, and other stones, such as quartzite and sandstone, are usually produced with a size variation that will only allow joints from 1/8" to 3/8", depending on the stone and factory.
Related QuestionsQ.Can I specify that there be no grout joints between tiles?
Stone SourceWe believe that you should not. In order to be able to install stone tiles without a grout joint, there have to be three perfect conditions: a perfectly flat floor, a perfectly square tile and a perfect installer. Since all three, for all intents and purposes, are rarely perfect, you cannot get a floor without grout joints. However, in a perfect world; in other words, a project without a budget, you can have all three, but be prepared to spend lots of additional money.
Related QuestionsIs it preferable for tiles to be installed with open or closed grout joints?
Tiles in Northern Ireland - info on tiles and marble, adhesi...With closed joint (or butt-jointed) installation, adjacent tiles are in contact. The thickness of the joint is minimal so it has a very low visual impact. Installation is quick since each tile placed in position provides an immediate reference for the subsequent tile. But this is where the advantages end. The risks (which correspond to the advantages of open joint installation) are certainly more significant.
Related QuestionsHow should natural stone tiles be cleaned and maintained?
Frequently Asked Questions :: Stone & Tile Shoppe Inc. Buy q...After installation, all tiles should be washed and cleaned thoroughly. Cleaning should be done on a regular basis with a mild cleaning soap and water. Do not use strong detergents for regular cleaning, which will affect the grout, cause joints to come apart very quickly, impact the life of the tiles and any sealer you might apply. We also recommend that the tiles be sealed with a silicone impregnator. This will make the material impervious, and protect against any staining or spotting.
Related QuestionsWhy choose natural stone over ceramic tiles?
Stone Flooring Tips: FAQIt really is a personal choice. Both natural stone and ceramic tiles have their benefits, limitations and appeal. We love real stone for its long life, its warmth, the fact that it is natural and doesn’t contain any chemicals and for its timeless beauty (it can be rejuvenated to increase its luster, unlike a ceramic tile). Generally yes! Though the better quality "stone-look" ceramic tiles are similarly priced.
Related QuestionsHow Natural Stone tiles differ from Ceramic tiles?
The very first and basic difference between Natural Stone and Ceramic Tile is that Natural Stone is a product of Mother Nature where as Ceramic Tile is man-made and hence artificial. And as is the case with most of the man-made material it is not as unique or as durable as most of the Natural Stones. Ceramic Tiles that get defaced due to staining or scratching need to be replaced, while Natural Stone can always be restored.
Related QuestionsI have real natural stone with grout. Do I need this sealed?
Decorative Concrete of MarylandYes, the grout will always continually have to be replaced if not sealed, and when sealer is applied the luster will also be restored and a much longer life.
Related QuestionsHow do I clean and maintain my natural stone tiles and counter tops?
Coral stone from Marble of the World - America's largest imp...We recommend sealing your natural stone to help prevent staining. Regular cleaning and immediately blotting up spilled liquids will keep your natural stone looking beautiful for years to come. Clean your natural stone with warm water and a non-abrasive, clear, non-acidic cleaner. For more information about natural stone care, please visit the resource section of our website.
Related QuestionsCan natural stone and slate tiles be laid on backing panels?
Bellstone, Australia, NSW,Wholesale suppliers, Welsh Slate, ...Yes they can, providing (1) an appropriate adhesive is used and (2) joints are properly taped to prevent tiles lying above the seams from cracking.
Related QuestionsCan I do my countertop using tiles or other natural stone products?
Stone Tile Depot: FAQYes, you can use our tiles and mouldings to get a natural stone countertop. With minimal grout joints, it will be like natural stone countertop at the quarter price of solid countertop.
Related QuestionsHow much space is there in the medallion grout joints?
Monticello Tile Design FAQ regarding our products, services,...All of our medallions and other products have a grout spacing of approximately 1/16" between shapes.
Related QuestionsHow wide should my grout joints be?
Slate Flooring Tile FAQsIt's a matter of personal taste, but traditionally slate tile has been installed with wide grout joints. We suggest 3/8" for the 12"x12" and 1/2" for the 16"x16". Due to slight variations in tile size use of tile spacers is not recommended with slate tile.
Related QuestionsShould I seal the tile and grout joints?
Tile New ZealandTips: "It is always a good idea to seal cement grouts. For ease of maintenance and protection against stains, the cost represents only a small part of the total job and is well worth itâ?? Yes, The sealing of the tile and the grout joints is one of the final steps for the tiled area. The sealer is absorbed and fills in any pores which left unsealed will absorb dirt and/or stains. Usually the new installation and grout should be allowed to dry for several days prior to applying a sealer.
Related QuestionsMy grout joints have discoloured. What can I do?
Tile New ZealandGrout joints can be re-coloured by applying a topical coating, similar to painting. These are commonly called grout colourants and are available in many colours. These are usually simple to apply and provide an even appearance while protecting your grout joints from future discolouration/staining.
Related QuestionsWHAT SIZE GROUT JOINTS SHOULD I USE?
Using StoneAgain, this is a matter of choice and the look you prefer. Honed stone can usually be butt jointed (tight to each other) with very little grout showing if you want to see less grout or a grid pattern; tumbled stone usually has a 1/8" to 1/4" grout joint which will show off the edges more.
Related QuestionsDo you need to grout the tiles?
Exotic Metal Interiors, Inc : stainless steel, copper, patin...Yes and no. If the tiles are in a "working" area where water or other liquid is likely to be splashed against it (e.g. Behind the sink, behind the stove) then it is recommended to grout the tiles using the caulking method described in the installation literature. If the tiles are in a purely cosmetic area ? then there is no reason to grout the tiles except for aesthetics.
Related QuestionsHow do I get rid of mould or mildew from my grout joints?
Tile cleaning, grout cleaning, grout sealer, grout cleaner, ...A mild coving of mould, mildew or algae can be removed using Shower Tiles Plus. For more deeply ingrained staining it may be useful to try spraying some dilute household bleach onto the affected areas and leave it to act for an hour or so before rinsing with plenty of fresh water- Always test a small area first! This should certainly kill the mould. If there are still stains then consider re-colouring the grout with Grout Colorant.
Related QuestionsIs it Natural Stone?
Fernhill Stone - FAQ'sThe products are cast in moulds using a technique process that replicates existing colours and textures with meticulous detail. Each colour and texture has its own blend of ingredients producing the look and feel of natural Stone.
Related QuestionsCoral stone from Marble of the World - America's largest imp...Natural stone is a product of nature produced as a result of million of years of different geological changes that took place in the earths crust. This has resulted in the creation of a wide variation of color and characteristic. Depending upon its process, composition and characteristics, Natural stones have been grouped into categories such as granite, marble, limestone, travertine, quartzite, sandstone and onyx.Related Questions
Natural Stone is a highly selective product with individual feel, touch and color sensitivity, subjected to desire for uniqueness and satisfaction of individuality. A classic look developed by nature over millions of years, that is not affected by fashions, nor perishable over a period of time. Natural Stone is being created as a result of millions of years of different geological changes that take place in the earth's crust.Related Questions
How can I stop the epoxy grout from running out of the vertical grout joints?
LATICRETE® International > Architects > FAQ > Troubleshooti...You must use LATICRETE Part D Non Sag Additive when grouting vertical joints 1/8â?? (3mm) when using LATAPOXY 2000 Industrial Grout.
Related QuestionsGrouting Shower Walls - do I need to grout the wall tiles in my bathroom shower?
CTaSC: Installation FAQ QuestionsFlush Sinks in Granite Top - Granite counter top sink cutouts are not as I ordered. I ordered the sink cutouts on counter tops made for our kitchen to be made FLUSH with the sink bowls.The sink manufacturer specified this on the prep sink cutout for accessories but not on the two bowl sink. I ordered the two bowl to be flush as well to match.They had both sinks in house and I provided them detailed drawings for reference.The tops were delivered with a 3/16 reveal on both sinks.
Related QuestionsDo I have to grout my tiles? Surely this will spoil the picture?
Handpainted tiles by Susan Griffiths, Tile ArtistFor practical reasons tiles need to be grouted. This doesn't detract from the over all visual impact as the panel is designed taking account of the grout joints. Hand made tiles are more irregular in shape than machine made tiles and therefore require a larger grout joint. (So a rustic hand made tile would not be suitable for a geometric design.
Related QuestionsHow can I clean the grout haze off my new tiles?
Ontario ceramic tile technical info - ceramic tile installat...A solution of warm water and white vinegar. (Up to about 1 part vinegar and 1 part water). In more severe cases you may use Sulfamic Acid Cleaner.
Related QuestionsWhat can stone mosaics tiles be used for?
MOSAIC STONEWORKS. Affordable Stone Mosaics, Slate & Marble ...Our pebble tiles range in color and are popular because of its durability, texture and unique look. Our pebble stone mats can be used indoors and outdoors. This product is a popular item to use on patios, steps, swimming pools, backsplashes, showers, kitchens, driveways and around fireplaces.
Related QuestionsHow can you tell if the grout joints need to be resealed?
DeGeorge ceilings, fans, floors, custom cabinetry, skylights...If you put a few drops of water on the grout and they bead up, the sealer is OK. If the water absorbs into the grout, it is time to reseal.
Related QuestionsWhat is the difference between cast stone and natural stone?
Old World Stone Ltd. - FAQsCast stone is a man-made material. Cements and aggregates are combined and molded into a variety of building products for use as pavements, walling, and ornament. It deteriorates in the same way as concrete. Natural stone is millions of years old, formed in the earth under enormous pressure. Although it costs more initially, It is more durable than cast stone and is a wise investment in the long term.
Related Questions