This is a concrete question more than a radiant heating question. All concrete applications must be structurally satisfactory. There is no important difference between concrete mixes from the heating standpoint.

Electric floor heating systems are ideal for heating smaller areas. There is little or no maintenance involved over time, and they are the easiest types of systems to install. Hydronic radiant floor heating is the most popular form of radiant heat, mainly because it has been around the longest. Hydronic systems are ideal for heating entire homes or buildings because they are generally less expensive and have lower operational costs when heating larger areas.

If you have a question that is not answered on this FAQs page, you may contact one of our member company's call centers that are listed on our Contact Us page with your specific question.

With radiant heat, the temperatures the floor temperatures tend to be stable and low. These are favorable conditions for wide pine floors. It is best to use material that has low humidity from the beginning. Probably not, if the building will be energy efficient. While heat will tend to rise, you are asking one floor to do the work of two and you may want to over design the first floor.

Radiant heat is transmitted from a heat source via rays just like rays of sunlight. These rays pass through the air without heating it since only solid objects can absorb the heat they transmit. Dark colours absorb more radiant heat than lighter colours which reflect more of it. This is why light coloured clothing is cooler than dark coloured clothing. All our Napoleon Fireplaces are designed to generate radiant heat into your living room.

An Eichler radiant heat system that has copper pipes can be repaired and maintained indefinitely with a little periodic maintenance. However, if your radiant piping is made of steel, as was done in many mid-'50s Eichlers, it may not be repairable. In any case, be sure to recruit a qualified radiant heat specialist (and perhaps even a second opinion) to diagnose your situation and lay out your options. More information. Don't mess with it.

Far-infrared radiant (FIR) heat is a form of naturally occurring energy that heats objects by direct light conversion (DLC). DLC warms only the object and does not raise the temperature of the surrounding free air. All life requires FIR heat from the sun. FIR heat is not ultraviolet radiation but a narrow band of energy within the 5.6 to 15 micron level. This type of energy travels only 2-3" deep into the body to increase circulation and nourish damaged tissue.

It is really important to sit down with the surgeon and to have a complete evaluation to determine whether you are a good candidate for hair transplantation. The hair color, the texture of the hair such as whether it is straight or curly, all these things can affect the outcome in a significant way. Patients with lighter blonde type hair generally have a better result than patients with fine, straight, black hair.

Though all portland cement is basically the same, eight types of cement are manufactured to meet different physical and chemical requirements for specific applications: Type II is used for structures in water or soil containing moderate amounts of sulfate, or when heat build-up is a concern. Type IV moderates heat generated by hydration that is used for massive concrete structures such as dams. Types IA, IIA and IIIA are cements used to make air-entrained concrete.

ASTEC is an excellent means of preventing solar radiation from being absorbed into a surface. However, most of the overheating of vehicle interiors occurs from sunlight through side windows, with only a fraction of the heat gain occurring through the roof. ASTEC would reduce the heat gain but the effect would not be as effective as tinting the windows would be.

Yes, Mohawk Engineered & Longstrip (glueless) Hardwood Floors are suitable for installing over a radiant heated concrete slab. Caution: The slab surface must never exceed 85 degrees F in temperature. Before installing over a radiant heated floor, turn off heat and wait until the floor has reached room temperature. After installing the floor return the heat to the previous setting.

Yes. There are different manufacturers and different methods, but it has become more and more common this past decade.

A step down transformer sends a low-voltage current (between 8-30 Volts) through the ZMesh or Tuff Cable. The resistance of the ZMesh or Tuff Cable creates enough radiant heat to safely warm the floor surface and heat the room, or melt the snow of your roof or driveway. Uncomfortable cold tile and hardwood are warmed to a pleasant temperature determined by you. The radiant heat created is evenly distributed throughout the room.

HeatQuest and its dealers will custom design a system according to your desires. Pricing for your custom system will depend on the amount of square feet you want to cover and what will be the finished floor surface. Contact us for more information.

Radiant heat installed under new or existing floors can be a great way to heat your home. Radiant floor heat is a very efficient way to transfer heat if the system is designed and installed correctly. Radiant Slab Heating must be insulated beneath the slab with at least 1" or 2" of styrofoam insulation.

Radiant heat makes a significant difference in cooking results, which is why the AGA Cooker is legendary among chefs and owners worldwide. The AGA is the only stove that cooks using radiant heat. The best way to discover the AGA difference is to attend an AGA Cooking Demonstration {add link}.

Most conventional ovens cycle—heating up and cooling down, rarely being at the exact temperature at which the dial is set. As food approaches being done, the up cycle tends to overcook the food, making it very important to take out the food at precisely the right moment. The AGA does not cycle. The gentle, radiant heat in each oven is very constant. Accordingly, it is much less critical that food is removed at an exact moment. This is what is meant when the AGA is called “forgiving.

Radiant heat is energy. It has no temperature as it travels through your living spaces; however, when this energy strikes an object, it is absorbed and increases the temperature of that object. The object then emits this energy out the other side causing heat loss or heat gain through the building envelope. A whopping 75% of the heat transfer in your building envelope is in radiant heat energy.

First and foremost, having a Radiant Design is the LAW as governed under the Canadian B214 Hydronics Code. Your radiant design may come with the tubing layouts so you know where those tubes are located for future additions or alterations.

From a scientific point of view, the formulae used to calculate heat transfer by conduction and radiation are as follows: effective conductive heat barrier (insulating against heat transfer by conduction) reduces the heat transfer by copnduction by providing thermal resistance (R-value). This is where mass insulation such as fiberglass wool. polystyrene, etc. come into play. The main drawback to conductive insulation relates to thickness. The thicker the better.

A.....Ah, one of the greatest mysteries of pipe smoking! If anyone can come up with a way to predict what tobaccos will smoke the best in a pipe I think they'd be a millionaire overnight. But the fact remains that pipes, like people usually "prefer" one type of tobacco. For example, I have a straight apple I made for myself when I first started crafting pipes. Smoked like a dog! I tried every tobacco I had, every packing method, and anything else I could think of.

Absolutely. Each type of hunting is different. The choice of your suit depends on what type of Mobility you need. We have suits for the fast paced upright stalk, for crawling, laying down, bow hunting and suits that work as a wearable blind. For Turkey Hunting we recommend our Famous "Tracker" Poncho. For Cyote Hunting our Stalker Poncho works great. For Bow Hunting we have a Bow Hunter Ghillie Suit, available for the right or left handed hunter.