No problem! As you can see below, we run an animated caption across the bottom of the browser of what the my Virtual Sales person™ is saying.

Answer: The number before the period is the total number of surround channels besides the subwoofer. You will want one speaker for each channel for the best surround effects. The number after the period signifies the number of subwoofers (usually 1). In a 5.1 system you'll have a center speaker, 2 front speakers, 2 rear speakers, and a subwoofer. A 6.1 system will have 2 fronts, 2 rears, a center front, a center rear, and a subwoofer.

If you can't hear sound from your speakers, it means the speakers are not connected properly, the sound card isn't setup correctly, or the speakers could be defective. First, check the speaker-to-computer connections. Make sure the cable connected to the "Audio In" jack on the speakers is also connected to the "Speaker Out" or "Line Out" jack on the sound card. You can test the sound card jack by connecting headphones to it.

The test mode is activated by holding the RADIO button and turning on power. The head unit now enters a test mode sending audio to the amplifier in the following repeating sequence: The head unit continues to function as normal, except for this sequencing of the audio outputs. Turning off the head unit will leave the test mode.

If you can't hear sound from your speakers, it means the speakers are not connected properly, the sound card isn't setup correctly, or the speakers could be defective. First, check the speaker-to-computer connections. Make sure the cable connected to the "Audio In" jack on the speakers is also connected to the "Speaker Out" or "Line Out" jack on the sound card. You can test the sound card jack by connecting headphones to it.

The AC adapter is plugged into an AC outlet you know has power (don't laugh, I'm guilty of this one myself). Both ends of the cable from your computer to the speakers is pushed in all the way (subwoofer and computer). The cable going to your computer's sound card is plugged into the speaker out plug (not the line out, line in, digital in or out, or microphone plug). With sound cards capable of feeding more than two speakers, make sure the speaker plug you choose is for the front speakers.

No, The carpet covering we use is Acoustically Transparent and will not muffle the sound of a good quality pair of speakers, you may find a slight reduction in very high frequency's that you most probably wouldn't hear anyway.

You can bring your own "home stereo" equipment (you may not exceed the electricity limit). Read more at the Rules page section "Music Loudness".

The production mix team are the individuals charged with recording your live dialogue, in sync with the camera team. The Production Sound Mixer is your most important ally at this stage in the movie's production. Although you will be anxious to complete as many setups as possible during each shooting day, a little extra time given to the sound mixer to allow him to capture scene ambience (called room tone) will pay off handsome dividends later during our dialogue editing.

The best way to change the sound of your speakers is to change where you put them. Ideally, the speakers should be located at ear level, in front of you, squared off between you. It's then a matter of fiddling with: Other than that, speaker modifications can be a can of worms, or can produce very subtle changes, which you might prefer. For example, you might improve a speaker by adding some cross braces of 1"x1" wood from left to right and from front to back.

When you can only hear sound from the front speakers, it usually means the sound card does not support surround sound, and/or the sound card is not configured correctly, the speakers are connected incorrectly or the speakers could be defective. First, make sure your sound card supports surround sound 4.1. A surround sound card should have a front and rear speaker jack.

The sizes and impedances of the speakers are rather unusual. The amplifier may not like, or may not perform the way it should, if speakers of different impedances are used instead of the standard speakers. The information the tables below were taken from the 95 workshop manual for model year 1999. The sum of all amplifier powers does not add up to the marketing power numbers.

This is only possible with the optional mr Handsfree Blue Mute cable. Thanks to this professional built-in solution, your conversation is carried over the car speakers. This optional cable can be purchased via our online shop. The microphone might be disconnected. Please check the connection of the microphone to the carkit. If the microphone is not disconnected, press the button of the microphone down and make sure that the Genius main unit is put correctly into the holder.

We feature a state-of-the-art theatre sound system, which broadcasts to your car in FM STEREO. Use your car's FM radio (set your ignition to the accessory position). Nearly all portable FM radios work very well at the drive-in, and you're welcome to bring them along.

Flat panel speakers and conventional speakers make sound in totally different ways. Conventional speakers have a cone, which moves backwards and forwards displacing the air directly towards the listening position. Effectively, they are very directional in nature, producing a pronounced ‘sweet’ spot or focal point for the sound. Flat panels make sound by electrically stimulating the surface of a rigid board in the same way that a tuning fork excites the surface of a table.

Upload slots represent the number of files other users can download from you at any one time. The default number of slots varies based upon the connection speed you set at installation, and the default bandwidth usage is set at 100 percent of your connection speed. You can self-configure your number of upload slots and percentage of bandwidth usage by clicking on Tools > Options > Uploads > Basic/Slots.

All of IGN.com's users, whether they are IGN Insiders, IGN board users, or Vault Network board users, are managed on IGN's User Pages. An excellent site FAQ on IGN's User Pages is available: That should fully explain what our user pages allow you to do.

Audio players start to generate distortion, when you have to increase the volume to max or near max just to hear them. This occurs as most audio drivers in portable players aren't properly designed to produce clean audio at high volume levels. The higher the volume level, the greater the distortion. By using the Boostaroo, you can leave the volume of your player at a lower level thereby reducing distortion and even increasing the battery life of your audio player.

Java Sound supports the following audio file formats: AIFF, AU and WAV. It also supports the following MIDI based song file formats: SMF type 0 (Standard MIDI File, aka .mid files), SMF type 1 and RMF. The Java Sound engine can render 8 or 16 bit audio data, in mono or stereo, with sample rates from 8KHz to 48KHz, that might be found in streaming audio or any of the supported file formats.