Although it is possible to use a different product on the rails, we recommend using the same product. This will make it less confusing when it is time to do maintenance. Rubbol Siding Finish, Rubbol Solid Stain, or Rubbol DEK may be chosen to more closely match the rest of the house.

We do not recommend spraying Cetol DEK Finish. For proper application of Cetol DEK Finish use a china bristle brush. If mistakenly sprayed and the overspray is still wet wipe the coating off with a rag and mineral spirits. If the overspray is dry it will be difficult to remove and will require the use of a paint stripper/remover. However, these can cause damage to other surfaces, especially vinyl siding. See similar questions...

Cetol DEK Finish turns white on the second coat due to dew or moisture on the surface before it has dried. This moisture makes the surface rough and appear cloudy. To fix the situation, wait seven days to allow the coat to fully dry; lightly scuff sand the surface with 220 grit sandpaper, remove dust and apply another very light coat of Cetol DEK Finish. Do not work too late into the afternoon or evening. See similar questions...

No Main Deck Railings will last as long if you don't paint them however, the open cells will hold more dirt and moisture and require frequent cleaning. See similar questions...

After you have received a confirmation number, your Faculty Profile will go to the hiring manager who is in charge of that particular search. The hiring department will then contact those individuals that are selected to be interviewed. See similar questions...

The concrete cover can be troweled to a smooth finish or a skin coat of lightweight concrete can be placed, for a finished appearance. When applying finishes or materials directly to the concrete cover, always follow the manufacturer's instructions for proper application. If the floor is being carpeted, 1/2" plywood should be placed, anchored directly to the concrete with mastic or masonry nails. See similar questions...

All races share the same finish in beautiful Chumash Park. Look for the large red arch. All races finish on the grass. For spectators, the last tenth of a mile is highly visible from many locations in the park. See similar questions...

New decks should weather six to eight weeks before applying UV Plus for Hardwood Decks. After weathering, the wood should be cleaned. The wood needs to weather sufficiently to allow the pores to open up to accept the stain. Failure to do so may cause premature failure and possible surface sheen problems. See similar questions...

Redwood decks should weather six to eight weeks minimum before applying UV Plus. The wood needs to weather sufficiently to allow the pores to open up to accept the stain. Failure to do so will cause premature failure and possible surface sheen problems. See similar questions...

We wouldn't recommend it. UV Plus for Hardwood Decks needs at least 24-48 hours to dry in good conditions. If a newly stained deck is rained on, the rain can force the stain up out of the pores of the wood, leaving a blotchy appearance. It's best to wait until there is no precipitation expected for 48 hours. In some regions, this may mean waiting for a different time of year to finish the deck. See similar questions...

No. The only way to get a shiny surface on the wood is by using a multiple coat, film forming finish. We don't recommend clear film forming finishes on decks because they are slippery when wet, they will eventually peel, and they are difficult to maintain and recoat. When properly applied, a penetrating finish like UV Plus for Hardwood Decks will not be shiny, it will have a natural, matte look. For a glossy or satin appearance on vertical surfaces, we recommend our Timberflex products. See similar questions...

Our only clear finish is for interior use only. We would suggest the transparent wood finish designed for the type of wood you want to coat. (Examples: Cedar/Marine for cedar or teak; Transparent Redwood for redwood.) This indicates overapplication of the wood stain. In most cases, washing the surface with a solution of TSP (Tri-Sodium Phosphate) and water, (with some scrubbing) after seven days drying time, will correct the problem. See similar questions...

A Backlash deck consists of up to 12 cards that contain no more than 6 Pre-match and no more than 6 Mid-match cards. They are not part of your hand and do not count as part of your Arsenal. The deck is separate. See similar questions...

New pressure treated lumber should weather six to eight weeks minimum before applying UV Plus for Pressure Treated Wood. The wood needs to weather sufficiently to allow the pores to open up to accept the stain. Failure to do so will cause premature failure and possible surface sheen problems. See similar questions...

The concrete cover can be troweled to a smooth finish or a skin coat of lightweight concrete can be placed, for a finished appearance. When applying finishes or materials directly to the concrete cover, always follow the manufacturer's instructions for proper application. If the floor is being carpeted, 1/2" plywood should be placed, anchored directly to the concrete with mastic or masonry nails. See similar questions...

Cetol SRD should be weathered before recoating. Visually inspect the coating and when it appears faded spray the surface with water. If the water penetrates and the wood turns dark due to the moisture, this is an indication that it s time for a new coat of Cetol SRD. If it still repels water, do not apply a maintenance coat. When reapplying Cetol SRD, the surface should be back to bare wood; otherwise the wood may look dark, blotchy, or shiny. See similar questions...

Railings are a necessary and integral part of any bridge! The not only provide visual cues to drivers crossing bridges that are one lane or less, but they provide an added safety margin. For wider bridges, railings will generally restrain a vehicle that may lose control on a bridge in extremely wet or icy conditions, for example. They also inspire confidence in pedestrians crossing a bridge. For the elderly, a solid handrail is always a welcome addition to any bridge. See similar questions...

Holes are routed into the posts and rails, so that pickets can be inserted into them, without any requirement for external (visible) brackets or hardware. See similar questions...

Depending upon the styles of fence, different fasteners can be used. Vinyl channels, which are often used in the fabrication of Privacy and Semi-Privacy styles, are attached using screws with PVC screw covers. See similar questions...