Absolutely. And don't believe anyone who says otherwise. Just be sure to make it clear that you will be powering a VFD because it may change the size recommendation.

Pages 22-26 of the manual give step by step installation instructions. Two things to remember about the VFD. First, it will work on any COM port but it must be powered to +12V. Second there is a switch underneath the VFD that must be turned ON. Gets us everytime! See similar questions...

In most cases weight matching of the pistons and rods/rod bolts is all that's required. The inline six is naturally balanced against first and second order harmonics and the crankshaft/counterweights usually don't require spin balancing, but having this done will improve engine smoothness at high rpm and lessen harmful vibrations. The Jeep I6 motor is internally balanced so the addition of the flywheel and harmonic balancer isn't necessary for the spin balancing procedure. See similar questions...

The Austin Air Cleaner's Permanent Split Capacity motor costs 50% less to operate than most other air purifiers' motors. The motor uses 90 watts of electricity when run on high. The motor is capable of running 24 hours a day and it will not overheat. See similar questions...

CLD motors have exceptionally long life when properly applied and maintained. Endurance testing is being performed and as of March 2004 has demonstrated life in excess of 750 million linear inches when run axially loaded with 100 lbm using a motion profile peaking at 65 inches/sec over an 8 inch stroke. See similar questions...

Motor tics are involuntary movements of any muscle, ranging from sudden, rapid, jerking motions, to slower stretching movements. Examples include rapid eyeblinking, mouth opening, facial grimacing, horizontal head movements (hair out of eyes tic), shoulder shrugging, crotch touching, rapid extension of the arms or legs. They include other behaviors such as tugging at clothing, licking lips, sticking the tongue out, eyes glancing up, widening eyes, and stretching movements. See similar questions...

No. Some games that I would classify as handhelds have no lights. A more important description is that they have to have some kind of interaction with the user, whether it be lights, sounds or anything else. See similar questions...

It probably doesn't matter. Proponents of bottom mounted tanks talk about the risk of fuel leaking on a hot motor and starting an inflight fire. However, fuel simply dripping onto a hot engine is unlikely to ignite; a spark or other source of ignition is required. Top mounted tanks are required for machines using float carburetors unless an external fuel pump is used. The more common diaphragm carburetors have a built in fuel pump. See similar questions...

Synthetic oils are formulated to perform better than petroleum oils at both high and low temperature extremes. That's why every jet engine in the world is uses synthetic oil (and have from day 1). AMSOIL Synthetic Motor Oils have extremely low pour points and flow easily at extremely low temperatures for easier winter starting and significantly reduced engine wear. At high temperatures, no conventional motor oil can compare to the overall protection AMSOIL Synthetic Motor Oils provide. See similar questions...

This line of high-endurance engine oils, designed to provide protection during today's longer oil change intervals, includes four products -- Mobil Clean 5000, Mobil Clean High Mileage , Mobil Clean 7500, and Mobil 1 Extended Performance.. Each product in this complete line of oils is guaranteed to provide protection from lubricant related engine failure for up to 5,000, 7,500 and 15,000 miles, respectively. See similar questions...

If the motor stalls, (loses synchronism) motor output torque drops very low, and the motor current drops slightly. There are no mechanical parts slipping, only magnetic slippage. The step motor is a good motor for torque limiting applications. What is the normal sound the motor should make? A Step motor makes an audible sound at a frequency that varies with stepping rate of the motor. Click to play normal step motor indexing sound. See similar questions...

Rotating of the CLD motor shaft does not affect the ability of the motor to produce force. A rotating shaft motor can only be accomplished with a position feedback sensor that would allow shaft rotation. The LC type CLD encoder does not allow rotation. Continuous rotation of the shaft could decrease the bearing life of the motor. See similar questions...

After sailing several years with a cantankerous old Atomic 4 gasoline inboard motor which I rarely used, I decided to remove it entirely and sail engine-free. I made this choice for many reasons, including feeling that I was ready to tackle this sport on another level. Sailing alone and engineless seemed the best way to discover whatever it was that I was looking for. See similar questions...

cc scooters will go a maximum of 40-50 mph; 150cc scooters maximum of 60-65 mph; and 250cc scooters will max out at about 80-85 mph. See similar questions...