I'll look in to a heater... what's the optimal temperature for this tank to be at?
MollyBehFAQslt;Unless otherwise stated, tropical fish should be kept at 25C/77F. A degree or two either way won't make much difference, but most tropicals will weaken and die below 20C/68F. Conversely, keeping fish above 28C/82F can cause problems with oxygen starvation and short life spans.> Can you suggest a good temperature to keep the baby fish? It's around 80F in the tank, I brought it down a little because I'm afraid of frying the fry. Thank you very much for your help and suggestions, guys.
What is the optimal temperature at which Rust Converter should be applied?
Rust Converter Frequently Asked Questions | Gempler'sRust Converter should be applied when the air and surface temperature is between 50 and 100 degrees F. Do not apply in direct sunlight or in very damp conditions.
what temperature should I set my water heater?
Metro Rooter - FAQ - Slab Leaks, Septic Tanks, Pipe Jetting,...Manufacturers recommend setting water heaters at 120 degrees (F). This will prevent accidental scaldings.
What is the optimal temperature for storing EasyDECON??
DTR Corporation|EasyDECON FAQ's, Easy Decon Facts, EasyDECON...DTR Corporation recommends keeping the solution in a cool, dry environment protected from direct sunlight or UV light. EasyDECON? will freeze at 24 degrees Fahrenheit (-4 Celsius) and will boil at 200 degrees Fahrenheit (93 Celsius). The product will begin to degrade at a higher rate when subjected to temperatures in excess of 120 degrees Fahrenheit (49 Celsius).
Question: I am interested in buying a propane heater. What size propane tank do I need?
NBMC: Frequently Asked QuestionsAnswer: Most of our heaters require a 100 lb. tank or larger unless they state otherwise in the heater description. If you need more information please go to our Propane Vaporization Chart and call your local propane dealer. Answer: Vent free heaters are designed to burn as clean as possible. However, there may be particles in the air from other household materials that when mixed with the combustion air the unit is using, give off the scent of kerosene. Typical odor producing prod.
How do I change the temperature on the water heater?
Frequently Asked Questions About Noritz Tankless Hot Water H...Noritz tankless water heater comes standard with a remote digital temperature controller, which allows you to adjust the water temperature. The controller is optional only on the N-0531S and N-0631S models. For other models, the control panel can be wired and installed in a remote location; up to 300 feet away from the unit. The water temperature is displayed on the easy-to-use control panel, and can be adjusted using the up and down buttons.
How do I get the heater to the desired temperature?
Atmore - Frequently Asked QuestionsThere are three levels with switches numbered 1,2,3. The switches light up when in the on position and the tap is on.
Which UltraHeat™ Tank Heater do I need to protect each individual holding tank?
Ultra Heat, Inc. - Frequently Asked Questions About Typical ...UltraHeat™ offers three types of tank heaters: two 13.5 Volt DC (VDC) powered tank heaters (Model 1200 & 2400); two 120 Volt AC (VAC) powered tank heaters (Model 4200 & 4800) and one combination tank heater powered with both 13.5 Volt DC and 120 Volt AC (Model 3600.) The UltraHeat™ Tank Heaters should be selected based on the liquid capacity of the individual holding tank to be protected, see the table below to help with this selection.
Why does the bath temperature heat up above room temperature when the heater is not switched on?
Brinkmann Instruments, Inc ::: FAQs-Temperature ControlA portion of the heating thermostat pumps' electrical energy is lost to the bath liquid in the form of heat. Pump output flow, thermostat insulation, and the type of bath liquid used may affect the increase in bath temperature. Some bath temperatures can increase as much as 70°C above ambient temperature; however, Lauda® Ecoline Circulators only heat the bath slightly above ambient temperature when the lowest pump flow setting is selected. Yes and no.
How does the tankless water heater differ from a typical tank type water heater?
FAQ's of Tankless Water HeaterWith tank type water heaters, you can draw water as fast as your plumbing will allow to you; however, when the hot water tank is depleted, you have to wait for the tank to re-heat before you can use hot water again. The tankless water heater will give you endless hot water for as long as you open a faucet.
What is the difference between a storage tank water heater and a tankless water heater?
Frequently Asked Questions About Noritz Tankless Hot Water H...Tank water heaters store and heat water at all times, thus incurring higher operating costs, whereas tankless water heaters only heat water as needed. In addition, tank heaters have a limited supply of hot water and will run out of hot water while tankless heaters provide an unlimited supply of hot water - you will never run out. Also, the size of a residential tankless heater is about the size of a carry on suitcase and can be installed virtually anywhere inside or outside.
How long will the heater burn on a full tank of kerosene?
Toyotomi U.S.A. - Frequently Asked QuestionsOur Omni models will burn for about 12-16 hours, our Radiant models will burn for 16-24 hours and our Double Clean models will burn for 15-23 hours. Burn time will differ depending on the quality of fuel used, room temperature and flame height.
Where can I get an electric water heater tank wrap?
Seattle City Light: Conservation | Frequently Asked Question...You can buy a water heater blanket in most home centers and hardware stores. However, you may get little benefit from wrapping your water tank because tanks made after 1989 already have extra insulation inside them in order to meet strict federal energy efficiency standards. You will have better savings and a more pleasant task if, instead of wrapping your tank, you check the temperature of your hot water and set your water heater back to 120 or 130 degrees.
If a tankless water heater doesn't have a holding tank, how can I get hot water from it?
FAQ's of Tankless Water HeaterThe tankless water heater doesn't hold any hot water. Water flows through a sensor, then turns on the burner.
What temperature should the hot water heater be set at?
FAQs By General PublicIf you have small children, a family member with a seizure disorder, or anyone that has difficulty getting out of the bathtub, your water heater should be set no higher than 120º F. At 160º F, the temperature many water heaters are set at, it takes only one second to get a third degree burn.
What temperature should my betta's water be & do I need a heater?
faqThe betta, as a tropical fish, prefers a water temperature of 75-80ºF (24-27ºC). Many bettas can tolerate water temperatures (room temperatures) down to 70ºF (21ºC), but some may act sluggish and refuse to eat at temperatures below 75ºF (24ºC). All temperatures below 70ºF (21ºC) should be avoided. Cooler temperatures may depress the immune system and a betta may no longer be able to fight off disease causing organisms, which are normally present in water.
What is the recommended temperature setting for my water heater?
Seattle City Light: Conservation | Frequently Asked Question...Both the top and bottom elements of your tank should be set at 120 degrees, unless you have a dishwasher that does not have a temperature booster. In that case, set both thermostats to 130 degrees. Check your water temperature with an accurate thermometer. Do not trust the numbers on the water heater itself. Setting your water temperature at 120 or 130 degrees not only saves energy, it prolongs the life of your tank and reduces the danger of scalding from water that is too hot.
Why is the optimal extension temperature for the HotMaster Taq 68?C instead of the usual 72?C?
Brinkmann Instruments Canada ::: FAQs-PCRUsing modern reaction buffer formulations, Taq polymerases exhibit a maximum activity at 68?C and therefore yield even more product than at the traditional value of 72?C. Nevertheless, RealMasterMix Probe can be used at 72°C as well.
