CAT-5e cable is not rated for outdoor use, however it can generally be used without a problem. If possible, run the cable through some kind of conduit to prevent moisture or an attractive site for lightning to strike. You should be able to find gray PVC conduit suitable for cable at any hardware store. Remember, 100 Meters is your max distance, without some kind of hub, bridge or amplification.

Ethernet, also called CAT-5, RJ-45, or 10-Base T, is the type of cable used to connect computers to the Georgetown network. Ethernet looks like a phone cable but with larger connectors at each end and a fatter cable. You cannot use telephone cable to connect to the Georgetown network.

Find the software to your ethernet card. Install the driver software for your ethernet card. Then follow the directions to obtain access to the HMS newtork.

Since Squeezebox's ethernet interface is 10/100 ethernet, you can use CAT3, CAT5, CAT5e, or CAT6 ethernet cable. If you are connecting directly to a computer you will need a crossover cable, otherwise a regular straight cable will work just fine. (Note: Some Macintosh computers will work with either a regular or crossover cable.) The maximum length for 10base-T and 100base-T cables is 100 meters or about 328 feet, assuming that the appropriate type of wire is used and it is laid correctly.

Yes, we do provide each student with a 14-ft ethernet cable and they are available at the Help Desk in Fellows Lobby. If the cable is too short, return it to the Help Desk. Multiple or longer cables are available for purchase from the bookstore or local stores like Walmart, Best Buy or Staples.

Extra long cables can be purchased at computer or office supply stores such as the NYU Computer Store.

You can purchase CAT-5 10-Base-T Ethernet cable from the Georgetown University Bookstore or any computer/office supply store. During New Student Orientation, vendors will have Ethernet cable for sale at UIS technology events.

A straight cable is most often used to connect an Ethernet interface to an Ethernet hub or switch. Shielded CAT-5 cable (STP) must be used, the connectors are RJ45.

A crossed Ethernet cable can be used to connect a GTH directly to a server's Ethernet port, without using a hub or switch. This is sometimes also called a crossover cable. Shielded CAT-5 cable must be used, the connectors are RJ45.

All Twisted Pair products from Altinex can either use any common CAT-5, CAT-5E or CAT6 cable. This makes the connection of AV products over an existing network easy and cost effective. Altinex twist pair products, MultiTasker based or Stand alone, have build in equalization that allows correction of a video signal for long cable runs. To ensure the best results and the longest distance possible Altinex offers no-skew twisted pair cable which does not require any equalization.

The 'run' describes the wire that goes from the cable entry point to the cable wall jack in a room in your home. Generally, a run that is greater than 100 feet is referred to as a 'long run' and can be a cause of signal deterioration. Please note that any cable run will cause deterioration. It just becomes more noticeable on a longer run.

No. Standard Ethernet cables do not have the necessary bandwidth properties for transmitting high-grade video over long distances. Because the actual usage purpose of UTP cables is to transfer digital data, the cable specifications are optimised for this use.

cablelynx provides a 30 inch cable with the Cable Modem. Longer lengths can be purchased from your local computer retailer, or your cable company. cablelynx has been tested with Ethernet cable lengths of 50 feet betwen the cable modem and the computer.

No. The cable can be direct burial, located in cable tray or secured to exposed conduit or structures. Use conduit or cable tray where available to reduce vandalism or cable damage but it is not required.

So long as you have access to port 25 (SMTP) and either port 110 (POP3) or port 143 (IMAP4), you can run ISMail. Also, check with your cable modem service to find out their policy regarding servers.

Yes, but you would have to implement the equivalent of Echelon's xDriver software. The best choice for using the i.LON 10 Ethernet Adapter without LNS is to use Echelon's OpenLDV driver. It is available free of charge at www.echelon.com/openLDV. Yes, though the algorithm differs from the i.LON 600 LonWorks/IP Server. This question is usually asked when trying to figure out how much bandwidth an i.LON 10 Ethernet Adapter might consume on an Ethernet segment. For example, if the i.

Most computer come with an integrated Ethernet card. If your computer does not have one previously installed, you can buy an Ethernet card and RJ45 network cable from the University Bookstore or from most other computer retail stores.

BaseTX devices to the switch always limit the cable distance to 100 meters (328 ft) as defined by IEEE specification.

Unfortunately, this switch is defective. Please go replace you switch ASAP with your Vendor. If you have this switch over 30 days, then please E-mail rma@gigafast.com for future instructions.