Yes, we recommend that you check that the floor is insulated to ensure the system is efficient to run and you reduce potential heat loss.

If the floor is cracked it is advisable to use an anti-fracture membrane, otherwise cracks may transmit through the tile. Also as stated in question #2 you cannot tile over a painted concrete floor. See similar questions...

Concrete Floors must not contain a sealer or finish of any kind. For installing below grade (below floor level, like in basements), we recommend Basement Proofer to prepare concrete floors. First, clean the sub-floor for any remaining dirt and grease. Tiles must be in the room of installation for at least 2 days to stabilize temperature. Never use polyurethane over vinyl tile. See similar questions...

Typically the removal and disposal of that type of asbestos containing material is not regulated by EPA (even commercially) if it is in good condition. If the material can be taken up with no significant breakage, there is little risk for fiber release. See similar questions...

Power troweling provides a nice-looking, smooth finish on concrete floors. It creates a "hard cap" (crust) on the surface. But when overdone, the surface becomes shiny and the crust may be very thick (1/8" instead of 1/32"), which may lead to problems. (Uncured lumps pushed into the surface while still plastic will become stress points that may cause spider web cracking later. The thick hard cap may spall as the concrete underneath cures and shrinks. See similar questions...

Yes, when proper installation methods are followed. Exterior applications require special precautions and installation methods. Do not install floor tile on exterior walls unless the product specifically recommends this application. See similar questions...

Ceramic tile in either glazed or unglazed form do not need to be sealed. These products are impervious to moisture and topical sealers will not properly adhere to them. Also, you can not change or alter the appearance or the sheen of a ceramic tile by adding a sealer. Therefore, a sealer in not recommended for glazed and unglazed surfaces. See similar questions...

Tile mosaics are a wonderful, lively addition that complements the appearance of your pool. They can be selected and ordered upon your visit to choose waterline tile. See similar questions...

Water and oil will bead up on your floor when sealed as recommended in our Installation Specification Guide. You need only mop it up with a sponge. For routine cleaning vacuum or sweep it, as you would any other natural stone floor or a wood floor. To wipe up, use a non-acid based cleaning product. Warm, soapy water is also fine. AquaMix makes a tile cleaning product, Concentrated Stone & Tile Cleaner, which can be used on your floor. Check their website at www.aquamix. See similar questions...

No paint must be removed off of a concrete floor before tile can be applied. Removal of Paint can be done by scraping it or a shot blaster machine. See similar questions...

Do not use household dust treatment chemicals on the tile. Use a vinyl floor cleaner and separate finish. Both must be water-based. Vacuums: Do not use a beater brush on a vinyl floor. Use the proper solid floor attachment for vacuuming. NO WAX! Do not wax a vinyl floor. All of our vinyl flooring contains a no-wax finish. The flooring is non-porous and will not absorb wax. It will build up and collect even more dirt. See similar questions...

We stock a range of underlays but there is one basic rule; if you are laying directly onto a concrete floor, you must use a DPM (Damp Proof Membrane) first to prevent moisture from the concrete attacking your flooring. For all other situations any of our other underlays are fine; from the basic polyfoam to our Duratex sound proofing underlay. Membrane) first to prevent moisture from the concrete attacking your flooring. See similar questions...

While we do not recommend fitting a Beech floor over such heating, the other hardwoods we supply are suitable for most varieties of under-floor heating. We have suggested fitting instructions available to help you decide which installation system is best suited. Most under-floor heating systems work best in conjunction with a "floating floor". See similar questions...

Most woods will darken as they age; becoming deeper and richer as they react to daylight. There may also be contrasting reverse-blushes of lighter wood due to naturally occurring white minerals. The effect can be very lovely. The extent of the contrast will be determined by the grade of floor chosen, with rustic floors developing the greatest contrast. See similar questions...

We can add depth to the areas needing support and add rebar to strengthen the concrete for the additional load. Metal screw jacks are often used for support posts. See similar questions...

This is the concrete hearth built into the floor so that if burning coals spill over onto the floor they do not cause a fire hazard. See similar questions...

Yes you can lay timber over concrete. If the concrete slab is less than five years old, we can apply a membrane between the slab and the timber so as the moisture from the slab doesn't damage the timber. See similar questions...

quot;Suppliers Can be Central to Your Business Success" from the ConcreteSherpa. Adobe Reader required. See similar questions...