The Swann Black Knight Camera receiver comes with an AV cable which plugs into the Video and Audio connectors on your TV or VCR. These plugs are commonly referred to as RCA plugs and are similar to the connectors used by game consoles and DVD players. If you plug your Swann Black Knight Camera's receiver into your VCR so that you can record the footage, you will need to select the AV channel on your VCR and then the channel on your TV that you normally use to watch video movies from your VCR.

The Swann Black Knight Camera has a 1/3" color CCD image sensor and a resolution of 420 TV Lines or 582 x 512(PAL), 512 x 492(NTSC). The Swann Black Knight Camera is wireless for video transmission so you may occasionally see lines or hear static on the screen. If this disturbance is excessive try the following to improve the picture quality: Look for other wireless devices such as cordless phones and wireless LAN that operate in the same area and could potentially interfere with your camera. See similar questions...

The Swann Black Knight Camera is wireless for video transmission. Both the wireless camera and their receiver should be powered by electricity to function over long periods of time. They should be located within 6ft (2m) of a power source and plugged in. A Swann wireless receiver uses an RCA AV cable to transfer the video signal received from a Swann wireless camera to your TV, monitor or VCR with AV connections, so must be located near your TV, monitor or VCR. See similar questions...

Due to the many variables in building construction and other causes of interference, the useful range will vary but can be up to 150ft (45m), depending on local conditions. See similar questions...

Yes, the Swann Black Knight Camera can be set to any of 4 channels the receiver is capable of using but you will not be able to view two wireless cameras on the same frequency or channel at the same time. Each additional camera must be set to a different channel on your receiver. Swann recommend a maximum of 3 wireless cameras for optimum reception quality but 4 cameras can be set up successfully with careful camera placement. See similar questions...

The Swann Black Knight camera has a heavy duty hood and weather resistant case to make it suitable for outdoor applications. Weather resistant cameras are able to be used in the outdoors if shielded from direct sun, rain, temperatures, snow and wind. Camera power supplies must never be left exposed. See similar questions...

The Infrared LEDs can project IR light that is invisible to the human eye but can be seen by the Swann Black Knight Camera to a distance of 49ft / 15m. With a small amount of ambient light, such as street lighting and house lighting, the distance can be extended. See similar questions...

Wireless video transmission is made possible with the use of video transmitters and receivers. The Swann Black Knight camera comes with a built-in video transmitter and a separate video receiver. The video signal is sent wirelessly through a specific radio frequency (2.4GHz) to the receiver which is connected directly to a TV, monitor or VCR using an RCA AV cable. See similar questions...

Yes, some common causes of interference are Wireless LAN equipment, cordless 2.4GHz telephones and microwave ovens (while they are actually cooking). Using the Swann Black Knight Camera which has 4 switchable channels will allow you to change to a channel that is further away from the interference source to minimize the potential for lines and noise on your screen/recording. See similar questions...

In daylight it is most useful to measure the optical range of the camera in terms of Distance to Subject (DTS). DTS is a measurement of the ideal distance to view a subject from a camera viewing a 6ft/1.8m tall person from head to toe on a standard television. This assumes the camera is viewing from 3ft/0.9m off the ground. See similar questions...

Your American system (NTSC) TV and VCR will not recive local broadcast channels and VCR will not play local tapes, nor it won't record off the local TV reception. This is due to the difference in broadcast systems between U.S. (NTSC) and most other countries (PAL, SECAM). See similar questions...

For video, use the S-Video connection. If your VCR does not have S-Video, use the composite video connection. For audio, use a pair of stereo audio interconnects to connect the analog stereo audio output (RCA jacks) from the back panel of the VCR to the corresponding audio input for the set of video inputs used (e.g., "Video 3"). If you have a home theater receiver, make the audio connection to your home theater receiver instead of your Digital TV/HDTV. See similar questions...

Long answer: The minimum requirement for reproducing audio and video on DVD is an MPEG video stream and a PCM audio track. (Other streams such as Dolby Digital audio, MPEG audio, and subpicture are not necessary for the simplest case.) Basic DVD control codes are also needed. At the moment it's difficult in real time to encode the video and audio, combine them with DVD-V info, and write the whole thing to DVD. Even if you could do all this in a home recorder, it would be extremely expensive. See similar questions...

Everyone wants these to be TV's, but in most instances they are actually more closely related to the VCR. In a lot of models the only remote control that will satisfactorily work combo sets is the manufacturers original. In many cases even manufacturers that build their own TV's, have some other manufacturer build their TV/VCR combo's. See similar questions...

It's generally not a good idea to route the video from your DVD player through your VCR. Most movies use Macrovision protection, which will cause problems such as a repeated darkening and lightening of the picture. See 1.11 and the Video RF section of 3.2 and for more info. See similar questions...

Our boats are equipped with generators so you can bring a TV/VCR. Don’t bring a TV alone as you won’t pick up any channels out on the lake. Our Lady of the Lake Series boat comes with a TV/VCR so don’t forget to bring some tapes along if you wish. Many people enjoy not having a TV. See similar questions...

Simply connect your coaxial cable into the HUSKYvision faceplate (the faceplate with only one coax connection) and the input jack on your cable-ready TV or VCR. Coaxial cables are available at the UConn Coop. If you have a VCR, connect your coaxial cable from the cable INPUT to the HUSKYvision faceplate. Then connect the OUTPUT jack from your VCR to the INPUT jack on your TV. See similar questions...

After you have set your TV / VCR to receive a cable signal, you will need to autoprogram it. You may also need to autoprogram your TV after any power outage or if your TV / VCR is unplugged. See similar questions...

Answer: Plug one end of the included iFIT.com audio cable into the iFIT.com jack near the machine's power cord or under the console. Next, plug the other end of the iFIT.com audio cable into the included adapter. Plug the adapter into an AUDIO OUT jack on your VCR. If the jack is already being used, you will need to purchase a 3.5 mm Y-adapter at your local electronics store. See similar questions...

It depends on what kind of computer you are looking at. Many teachers have iBook laptops. Below is a link to show some ways of many this connection. For additional help with any of the below, contact your ETT or Ext.150. See similar questions...